• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 제15회 음성통신 및 신호처리 워크샵(KSCSP 98 15권1호)
• /
• pp.470-474
• /
• 1998

In this paper, to estimate the time-varying parameters of speech signal, we use the robust sequential estimator based on t-distribution and, for time-varying signal, introduce the forgetting factor. By using the RSE based on t-distribution with small degree of freedom, we can alleviate efficiently the effects of outliers to obtain the better performance of parameter estimation. Moreover, by the forgetting factor, the proposed algorithm can estimate the accurate parameters under the rapid variation of speech signal.

• International Journal of Reliability and Applications
• /
• 제10권1호
• /
• pp.43-57
• /
• 2009

In this article, we study the reliability equivalence factor of a series system. The failure rates of the system components are functions of time t. we study two cases of non-constat failure rates (i) weibull distribution (ii) linear increasing failure rate distribution. There are two methods are used to improve the given system. Two types of reliability equivalence factors are discussed. Numerical examples are presented to interpret how one can utilize the obtained results.

• Animal cells and systems
• /
• 제7권3호
• /
• pp.255-259
• /
• 2003

Mutations in the factor Ⅴ gene are major risk markers for venous thrombosis. Several factors for blood coagulation have been related with cardiovascular disease. Ⅰ investigated genotype distribution for three mutations (G1691 A, A2379G and G2391 A) of the factor Ⅴ gene in the Korean population. Genotype frequencies were examined by polymerase chain reaction in 135 patients with coronary artery disease (CAD) and 116 healthy subjects. For the G1691A mutation (factor Ⅴ

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.40-45
• /
• 2010

In order to establish the electric distribution system economically and operate efficiently, it becomes important to calculate energy losses of the system more accurately. This importance is not only related for the engineering of utilities' power network but also for the consumers' electric system. The Distribution Loss Factor (DLF) is the fundamental element of calculating the energy losses occurred through the electric system including the electric lines and equipments. Up to now, the DLF is calculated by empirical formulas using the correlation between the DLF itself and Load Factor. However, these methods have some limitations to reflect the various characteristics of the system and the load. In this regard, the novel method proposed here is developed to yield more accurate result of DLF which actively interacting with the characteristics and load patterns of the system. The improvement of accuracy is very significant according to the results of verification presented at the end of this paper.

• Wind and Structures
• /
• 제31권5호
• /
• pp.419-430
• /
• 2020

Weibull distribution is a conspicuous distribution known for its accuracy and its usage for wind energy analysis. The two and three parameter Weibull distributions are adopted in this study to fit wind speed data. The daily mean wind speed data of Ennore, Tamil Nadu, India has been used to validate the procedure. The parameters are estimated using maximum likelihood method, least square method and moment method. Four statistical tests namely Root mean square error, R2 test, Kolmogorov-Smirnov test and Anderson-Darling test are employed to inspect the fitness of Weibull probability density functions. The value of shape factor, scale factor, wind speed and wind power are determined at a height of 100m using extrapolation of numerical equations. Also, the value of capacity factor is calculated mathematically. This study provides a way to evaluate feasible locations for wind energy assessment, which can be used at any windy site throughout the world.

• 한국방재학회 논문집
• /
• 제5권1호
• /
• pp.33-43
• /
• 2005

한국 도로교 설계기준과 AASHTO Standard 설계규준에 규정된 판형교의 윤하중분배계수는 사각의 영향을 고려하지 못하고 있으며, 이에 대한 연구는 매우 미흡한 실정이다. 본 연구에서는 검증된 유한요소해석모델을 이용, 다양한 변수를 고려한 구조해석을 통하여 강판형 사교에 대한 하중분배계수식의 제안을 목적으로 한다. 판형교의 유한요소모델은 현장실험과의 비교분석을 통해 선택되었으며, 이를 이용하여 강판형사교의 유한요소해석을 수행하였다. 연구결과 지간은 다른 변수들에 비해 윤하중분배계수에 미치는 영향이 작았고, 가로보와 브레이싱을 사교격자 구조로 설치할 경우 내측거더에서는 하중분배가 향상되며, 브레이싱 타입이 보다 유리한 것으로 밝혀졌다. 또한 해석결과를 바탕으로 회귀분석을 통해서 윤하중분배계수식을 제시하였고, 기존식과 비교검토하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권1호
• /
• pp.293-303
• /
• 2005

한국 도로교 설계기준과 AASHTO Standard 설계규준에 규정된 판형교의 윤하중분배계수는 사각의 영향을 고려하지 못하고 있으며, 이에 대한 연구는 매우 미흡한 실정이다. 본 연구에서는 검증된 유한요소해석 모델을 이용, 다양한 변수를 고려한 구조해석을 통하여 강판형 사교에 대한 하중분배계수식의 제안을 목적으로 한다. 판형교의 유한요소모델은 현장실험과의 비교분석을 통해 선택되었으며, 이를 이용하여 강판형사교의 유한요소해석을 수행하였다. 연구결과 지간은 다른 변수들에 비해 윤하중분배계수에 미치는 영향이 작았고, 가로보와 브레이싱을 사교격자 구조로 설치할 경우 내측거더에서는 하중분배가 향상되며, 브레이싱 타입이 보다 유리한 것으로 밝혀졌다. 또한 해석결과를 바탕으로 회귀분석을 통해서 윤하중분배계수식을 제시하였고, 기존식과 비교검토하였다.

• Geomechanics and Engineering
• /
• 제5권5호
• /
• pp.485-497
• /
• 2013

The factor of safety is the most common measure of the safety margin for slopes. When the traditionally defined factor is used in kinematic approach of limit analysis, calculations can become elaborate, and iterative methods have to be used. To avoid this inconvenience, the safety factor was defined in terms of the work rates that are part of the work balance equation used in limit analysis. It was demonstrated for two simple slopes that the safety factors calculated according to the new definition fall close to those calculated using the traditional definition. Statistical analysis was carried out to find out whether, given normal distribution of the strength parameters, the distribution of the safety factor can be approximated with a well-defined probability density function. Knowing this function would make it convenient to calculate the probability of failure. The results indicated that the normal distribution could be used for low internal friction angle (up to about $16^{\circ}$) and the Johnson distribution could be used for larger angles ${\phi}$. The data limited to two simple slopes, however, does not allow assuming these distributions a priori for other slopes.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1190-1197
• /
• 1999

The management of power factor(PF) in the distribution line is treated according to the measurement a month about the feeder unit at the substation. In Korea, we have not researched into power factor in distribution system due to it's less weight. The reactive power in advanced countries is controlled automatically by the compensative condenser switch on/off under the monitoring. This paper first presents the optimal condenser position and proper capacity by lagrangue factor ${\lambda}_{Q}$ which is the line loss index about reactive power unit. Therefore, the largest ${\lambda}_{Q}$ node is the condenser injection point and we find out the best condenser capacity when the line loss is saturated by the moderation of condenser volume. By this method, we suggest 0.6% uprising PF by injection of 15 kVA condenser. Additionally, PF is analysed into 5 areas; large city, middle city, small city, farm village, fishing village by the use of Power Platform which is classified the same concept of the low load management in KEPCO. Two feeders of each area are selected by the worst results of PF in specified areas.