• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.319-324
• /
• 1994

Bond test was carried out to assess the effect of several variables on bond characteristics between reinforcing bar and concrete. Key variables are concrete compressive strength(low, medium high, and ultra-high), bar diameter(13mm and 22mm), and concrete cover(25mm; 1-inch, 38mm; 1.5-inch, and 51mm; 2-inch). Confining effect and bar spacing are not taken into account. Thirty-two specimens subjected to uniaxial tension were tested under hypothesis uniform bond stress distribution along the reinforcing bar embeded in concrete. Test results(ultimate bond stress) were compared with bond and development provisions of the ACI building Code(ACl 318-89) and local bond stress versus slip relationship diagram represented to show effect of the above variables.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.10_11
• /
• 2009

최근 배전자동화시스템의 도입으로 배전 계통도를 이용한 원격감시 및 제어가 가능하게 되었다. 그러나 배전자동화시스템에 사용되는 계통도는 국가기본 지형도상에 전력설비의 심볼을 그려 넣은 것으로 운전상황에 따라 변경되는 계통의 연결 관계를 정확히 파악할 수 없다. 배전자동화시스템에서 사용되는 단선도는 사람이 작성하고 저장하여 사용할 수도 있고 컴퓨터로 필요할 때마다 새로 작성 할 수도 있다 전자의 경우 배전계통이 변경될 때 마다 단선도를 다시 그려야한다는 문제점이 있기 때문에 본 논문에서는 설비의 연결정보를 기반으로 하여 회선별단선도를 자동으로 생성하는 알고리즘을 제시한다. 이와 같이 생성된 단선도를 배전자동화시스템에 적용한다면 보다 효율적으로 배전계통을 운영 할 수 있을 것이다. 본 논문에서 제시하는 알고리즘들의 유용성을 검증하기위해서 모의 배전계통을 구성하고 회선별 단선도 자동생성 시뮬레이션을 수행하였다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.225-228
• /
• 2002

This research seeks to derive the design rainfalls through the L-moment with the test of homogeneity, independence and outlier of data on annual maximum daily rainfall in 38 Korean rainfall stations. To select the fit appropriate distribution of annual maximum daily rainfall data according to rainfall stations, applied were Generalized Extreme Value (GEV), Generalized Logistic (GLO) and Generalized Pareto (GPA) probability distributions were applied. and their aptness was judged Dusing an L-moment ratio diagram and the Kolmogorov-Smirnov (K-S) test, the aptitude was judged of applied distributions such as GEV, GLO and GPA. The GEV and GLO distributions were selected as the appropriate distributions. Their parameters were estimated Targetingfrom the observed and simulated annual maximum daily rainfalls and using Monte Carlo techniques, the parameters of GEV and GLO selected as suitable distributions were estimated and. dDesign rainfallss were then derived, using the L-moment. Appropriate design rainfalls were suggested by doing a comparative analysis of design rainfall from the GEV and GLO distributions according to rainfall stations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.503-506
• /
• 2001

This paper presents leakage magnetic field and leakage inductance calculations in current transformer by means of 3-D Integral methods. From the distribution diagram of leakage magnetic flux to be analyzed using program called TRACAL3, it confirms a parallel to the winding axis direction of the leakage flux lines in the air gap between the windings. The leakage inductances L$\sub$r1/ and L$\sub$R2/ of the primary and secondary windings were calculated, their values are 4.23 mH and 0.49 mH, respectively. They are also similar to the measured values of the leakage inductances for the experimental verification, 4.06 mH and 0.47 mH.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.175-178
• /
• 1995

Distribution of relaxation time is presented in the Cole-Cole arc diagram with frequency parameter. In the case of estimation of activation energy for main chains, maximum loss frequencies of ${\alpha}$ peaks, f$\sub$m/(${\alpha}$) display curved change according to the WLF type with variations of temperature. Structural change by the filling of filler and degradation by the thermal aging can be estimated from the WLF factors, C$_1$and C$_2$in Log f$\sub$m/-1/T curves which reflect the variations of free volume and thermal expansivity of composites.

• International Journal of Advanced Culture Technology
• /
• v.1 no.1
• /
• pp.19-22
• /
• 2013

The basic principle of the product manufacturing technology using the 3D printing technique materializes the material including the high molecular substance or plastic and metallic dust, and etc. the product into the laminate additive manufacturing according to the design diagram gradually. It is applied to the various industrial field including the field of food division, field of home appliances, field of medicine, field of mechanical department and construction, etc.. The global development case of 3D printing technique is the next. This study described global technology and market trends. Afterward, 3D printing technique manages the important role when it exceeds the product manufacturing view just and is grafted with the various technology including the biotechnology, nanotechnology, and etc. and it improves the quality of the human life.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3429-3432
• /
• 2011

Distribution diagram of $FeCl_2$ in HCl solution indicated that $FeCl^+$ was a predominant species in strong HCl solution up to 10 M. Solvent extraction of $FeCl_2$ has been performed in the HCl concentration range from 5 to 9 M by using Alamine336 as an extractant. Interaction parameter of $FeCl^+$ for Bromley equation was estimated from our solvent extraction data. This parameter thus obtained in our study can be employed in calculating the activity coefficient of $FeCl^+$ in high concentration of HCl.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.67.1-67.1
• /
• 2014

Abell 2537 has been regarded as one of relaxed galaxy clusters because the X-ray emission is regular and symmetric, while there is also evidence to the contrary that the brightest cluster galaxy (BCG) is offset from the velocity center. To investigate the dynamical state of A2537 we obtain the redshift information of cluster galaxy candidates using Hectospec mounted on the MMT 6.5 m and compile those in the literature. The velocity distribution of member galaxies appears bimodal, with the main peak including the BCG and a secondary peak at velocity difference ~2000 km s-1. Based on the three-dimensional analysis and statistical tests we conclude that A2537 has at least two substructures and is not fully relaxed from a merger near the line-of-sight. We discuss more about the dynamical state of A2537 based on the color-magnitude diagram and X-ray scaling relation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.255-261
• /
• 2015

An analysis of the interleaving effect for the secondary winding distribution of a toroidal transformer is presented in this paper. The equations to calculate the leakage inductance of the toroidal transformer are derived using MMF diagrams for the different secondary winding distributions. The simulation and experimental results are provided to show the validity of the theoretical calculation.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.185-190
• /
• 2001

The cavitation causes suction performance and efficiency of the high-speed pump to be reduced significantly To diminish these effects, the inducer has been used. Most of the inducer is designed at a maximum efficiency point of the pump, therefore suction performance drop due to effects of flow separation and inlet inverse flow is often observed at off-design point. The objective of this study is to find out the cavitation modes at various conditions by applying event detection technique and to design an inducer reducing cavitation. The pressure fluctuations at each cavitating condition were measured at inducer inlet and outlet locations using pressure transducers, which were located 90 degrees apart from each other to identify the cavitation modes. The time-frequency characteristics were analyzed by using Choi-williams distribution. In the second part of this paper, the inducer design method which uses nominal performance characteristic and onset condition of cavitation is introduced and applied to real situation.