• 상하수도학회지
• /
• 제28권3호
• /
• pp.345-358
• /
• 2014

For introducing the groundwater quality assessment using background concentration of groundwater, several methods had been studied to estimate the background concentration of groundwater and to suggest the background concentration of study area. Some methods such as Box whisker plot, Percentile and Cumulative probability distribution had been adopted to estimate background concentration, and it was evaluated that the Cumulative probability distribution method presents more reasonable background concentration because it can consider the data distribution. So we estimated the background concentration of study area using cumulative probability distribution method. We suggested the background concentration for each hydrogeology respectively in case hydrogeological water quality similarity is very low.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.199-206
• /
• 2015

The purpose of this study was to investigate radiation dose sensitivity due to displacement of human extremities in the water bolus box on radiation therapy. Water bolus box and human thigh with femur bone were constructed in computerized radiation therapy planning system to verify the absorbed dose. Two 6MV X-ray beams were irradiated bilaterally into water bolus box and then radiation dose were calculated each situation at displacement of middle axis of thigh from the center in water bolus box to right and left direction. Absorbed dose of thigh and femur bone increased by the distance of displacement. The maximum dose of thigh even increased 20% over than prescribed dose. This is in contrast to conventional concept of dose distribution in water bolus box. Based on this result, displacement of body site in the water bolus box have to be averted during radiation therapy.

• 한국컴퓨터정보학회논문지
• /
• 제6권2호
• /
• pp.90-96
• /
• 2001

네트워크의 발전은 통신망의 발전과 더불어 심각한 사회문제를 발생시킨다. 즉, 보안에 관련된 문제는 네트워크를 사용할 경우 해킹과 크래킹에 대하여 더욱 주의해야 한다는 것이다. 본 논문에서는 키분배 및 키길이에 관한 결정론적 문제점에 무관하게 암호화를 수행할 수 있는 다중 비선형 S-box 함수(Multiple nonlinear S-box function)를 사용하는 블록 암호시스템을 제안하고 하드웨어를 설계하였다. 제안된 다중 비선형 S-box는 암호화에사용되어지는 키 데이터에 대하여 비선형 함수를 다중으로 사용하여 비도를 증가시켰으며DC 및 LC에 의한 암호해석을 방지하기 위하여 MDP, MLP를 최대로 할 수 있도록 하였다. 본 논문에서 제안한 다중 비선형 S-box 함수는 Synopsys Ver. 1999.10과 VHDL을 사용하여 회로합성 및 모의실험을 수행하였다.

• 한국식품과학회지
• /
• 제21권2호
• /
• pp.238-241
• /
• 1989

국내 농수산물 유통용 골판지 상자의 65% 이상이 이중 양면골판지 (DW) 상자를 사용하고 있다. 이것을 양면 골판지(SW) 상자로 대체시 강도의 변화 및 경제성을 검토한 결과는 다음과 같다. 이중 양면골판지 상자에 비해서 양면골판지 상자의 압축강도는 46%에서 98%까지 높았고 가격은 8% 더 저렴한 경우도 강도는 높게 나타났다. 이중 양면골판지 상자를 양면골판지 상자로 대체시 날개부분에서 절약되는 금액은 405억원으로 자원 절약 효과는 13%에 달했다. 따라서 국내 골관지물 유통용 골판지 상자로는 양면골판지(SW) 상자로 대체하는 것이 바람직하고 사료되었다.

• Communications for Statistical Applications and Methods
• /
• 제16권5호
• /
• pp.851-858
• /
• 2009

In the last decades, there has been much interest in climate variability because its change has dramatic effects on humanity. Especially, the precipitation data are measured over space and their spatial association is so complicated. So we should take into account such a spatial dependency structure while analyzing the data. However, in linear models for analyzing the data, data sets show severely skewed distribution. In the paper, we consider the Box-Cox transformation to satisfy the normal distribution prior to the analysis, and employ a Bayesian hierarchical framework to investigate the spatial patterns. The data set we considered is monthly average precipitation of the third quarter of 2007 obtained from 347 automated monitoring stations in Contiguous South Korea.

• Structural Engineering and Mechanics
• /
• 제55권5호
• /
• pp.953-964
• /
• 2015

A model has been proposed that can predict the ultimate torsional strength of single-box multi-cell reinforced concrete box girder under combined loading of bending, shear and torsion. Compared with the single-cell box girder, this model takes the influence of inner webs on the distribution of shear flow into account. According to the softening truss theory and thin walled tube theory, a failure criterion is presented and a ultimate torsional strength calculating procedure is established for single-box multi-cell reinforced concrete box girder under combined actions, which considers the effect of tensile stress among the concrete cracks, Mohr stress compatibility and the softened constitutive law of concrete. In this paper the computer program is also compiled to speed up the calculation. The model has been validated by comparing the predicted and experimental members loaded under torsion combined with different ratios of bending and shear. The theoretical torsional strength was in good agreement with the experimental results.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.62-69
• /
• 2006

This study was carried out to measure and analyze the storage condition, distribution route, and packaging method of four selected agricultural products(small tomato, cabbage, peach, and carrot) in the cold chain system. It was shown that dew-forming phenomenon by fruits and vegetables deteriorates the agricultural product quality and physical properties of corrugated fiberboard box during the cold chain system. The compressive strength deterioration in corrugated fiberboard boxes was much greater for single wall(SW) corrugated fiberboard containers than for double wall(DW) in low temperature-high humidity condition. To reduce the deterioration of box and dew-forming phenomenon, water-repellency treatment should be over $R_6$. However, water-resistant treatment of corrugated fiberboard containers would be effective under high relative humidity conditions more than 75% RH. It was suggested that functional corrugated fiberboard box packaging would be an optimum method to reduce the deterioration of agricultural products quality by. It was also achieved controlling the relative humidity and temperature during the storage and physical distribution process.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.159-166
• /
• 1998

To study temperature effect of P.C. box girder bridge, field measurement was performed for six months, along with thermal analysis for the newly constructed viaduct of Gangbyun Highway in Seoul. Thermocouples were installed inside and surface of the flange and web of the box and temperature of box section md ambient temperature was measured. Measured environmental data are incorporated in finite element thermal analysis and computed temperature of the section was compared with measured one. Temperature gradient from thermal analysis was compared with Korean Highway Specification(1996)and the New Zealand Ministry of Works and Development code(1976). Thermal stress distribution across the box section was also compared.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.538-541
• /
• 2006

PSC(Prestressed Concrete) box girder bridges have been widely applied in Korea. A number of these bridges have been built by the segmental construction method in the longitudinal direction and(or) vertically along the cross-sectional depth with MSS(Moving Scaffolding System). An actual 2-span continuous PSC box girder bridge of Kyeongbu high speed railway was selected and instrumented with 96 vibrating wire embedded type strain gauges and 2 thermocouples. The long-term behavior of the bridge was monitored through two major points located at mid-span of the first span and at the internal support. Data collection started just after the casting of the first segment (U section). Concrete strain and temperature data were gathered regularly by a data logger (CR10) during 600 days under and after construction. According to this measurement, the parabolic longitudinal strain distribution in the top slab at mid-span is shown. And also, the same distribution at the interior support is shown. The compressive strains at the cantilever region are larger than at the web position and the internal part in the top slab. Strain difference largely happened during the early construction period.

• 한국해양공학회지
• /
• 제16권2호
• /
• pp.72-79
• /
• 2002

In this study, time-dependent distributions of temperature and stresses, in the box-column welded from ultra thick plates with center segregation, has been analyzed by the commercial finite element package SYSWELD+, for several types and angles of groove. The major points of investigation are the optimum type and angle of groove that minimize weld stress specially at the center segregation, as well as temperature distribution, residual stresses and changes in the mechanical properties. The results can be summarized as follows; 1) Generally the thermal cycle at the root of groove exhibits relatively rapid cooling pattern, however, most of the other part weldment have a slow cooling pattern in all groove types. 2) Most of the micro-structures of weldment are composed of ferrite and pearlite, meanwhile we could find martensite and bainite locally a the root of the groove. 3) Optimum groove type for high heat input welding of box-column corner is a double groove type, and the optimum angle for the groove is 30~$45^{\circ}$ that minimize deformation and weld stress at the center segregation.