• 콘크리트학회논문집
• /
• 제27권6호
• /
• pp.591-602
• /
• 2015

이 논문에서는 철골 연결보와 철근 콘크리트 전단벽체의 내진성능을 평가하고자 주기하중 실험을 수행하였다. 실험의 주요 변수는 벽체의 보강 상세이었다. 현행 설계 기준을 따라 설계된 병렬 전단벽체는 콘크리트의 지압강도로 인해 조기 파괴되었다. 한편, 매립길이 내에 추가적인 수직 및 수평 보강재로 보강된 벽체의 경우, 지압파괴가 방지되는 것으로 나타났다. 실험결과, 벽체의 수직철근은 수평철근보다 병렬 전단벽의 전단 강도에 더 영향을 끼치는 것으로 나타났다. 매립 철골 보 플랜지 상 하부에서 발생하는 콘크리트의 응력분포를 가정하여, PC 병렬 전단벽체 내의 소요 철근의 양이 결정되었으며, 이를 이용하여 예측 강도 식을 제안하였다. 예측된 강도식은 실험값과 비교적 잘 일치하였다.

• 터널과지하공간
• /
• 제19권2호
• /
• pp.132-145
• /
• 2009

암반내 존재하는 단층은 암반의 거동에 미치는 영향이 매우 크기 때문에 암반사면, 터널과 같은 암반구조물의 설계 및 시공에 있어서 단층특성에 대한 조사는 무엇보다 중요하다 할 수 있다. 그러나 설계단계에서 이러한 특성을 파악하기에 한계가 있기 때문에 시공중 막장관찰과 추가지반조사를 통하여 터널주변에 존재하는 단층의 분포 및 공학적 특성에 대하여 조사하여야 한다. 본 연구에서는 운모편암지역에서의 대단면 터널 공사중 설계시 파악되지 않은 대규모 스러스트 단층대가 확인됨에 따라, 단층대의 특성을 규명하기 위하여 다양한 지질조사 및 현장시험을 실시하였다. 이러한 지반조사결과를 바탕으로 단층의 성인, 구조지질적 분포특성 및 단층암의 공학적 특성을 파악하였으며, 단층대 통과구간에서 안전하게 터널을 굴착할 수 있도록 합리적인 지보 및 보강대책을 수립하였다.

• Geomechanics and Engineering
• /
• 제29권6호
• /
• pp.697-706
• /
• 2022

In order to explore the stable anchoring conditions of coal side under the mining disturbance of soft section coal pillar in Wangcun Coal Mine of Chenghe Mining Area, the distribution model of the anchoring support pressure at the coal pillar side was established, using the strain-softening characteristics of the coal to study the distribution law of anchoring coal side support pressure. The analytical solution for the reinforcement anchorage stress in the coal pillar side was derived with the inelastic state mechanical model. The results show that the deformation angle of the roadway side and roof increases with the roof subsidence due to the mining influence at the adjacent working face, the plastic deformation zone extends to the depth of the coal side, and the increase of anchorage stress can effectively control the roof subsidence and further deterioration of plastic zone. The roadway height and the peak support pressure have a certain influence on the anchorage stress, the required anchorage stress of the coal side rises with the roadway height and the peak support pressure. The required anchorage stress of the coal pillar side decreases as the cohesion between the coal seam and the roof and floor and the anchor length increases. Then, applied the research result to Wangcun coal mine in Chenghe mining area, the design of anchor cable reinforcement support was proposed for the section of coal pillars side that has been anchored and deformed, which achieved great results and effectively controlled the convergence and deformation of the side, providing a safety guarantee for the roadway excavation and mining.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.271-276
• /
• 2002

Existing design equations generally overestimate the shear strength of the circular transverse reinforcement. This is due to the simplification of the discrete distribution of the reinforcement to the continuous one and the inappropriate application of the classical truss model to the circular section, which is different in shear-resisting component from the rectangular section. The present study introduces a new model considering the starting point of the diagonal crack, the number of transverse reinforcing bars crossing the crack and the effective strength component of the transverse resistance. This model leads to a simple design equation which is derived using the linear regression method and is in agreement with the lower bound of exact strength curve.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.58-65
• /
• 2003

The conventional forming process such as squeeze casting or die casting for fabricating metal matrix composites products have a disadvantage such as non homogenous distribution of reinforcement, weak bonding between matrix and reinforcement and cost increase in parts fabrication. Thixoforming process has been accepted as a new method for fabricating the net shaped metal matrix composites with lightweight and wear resistance. In this paper, the effect of volume fraction and reinforcement sizes on mechanical properties in cylinder liner part of metal matrix composites has been investigated with processes parameters such as pressure and velocity. Moreover, the methods to obtain the thixoforged composites cylinder liner with high quality has been proposed. To evaluate the composites cylinder linear fabricated at the conditions proposed in this study, mechanical properties of fabricated composites cylinder linear were compared with those of commercial composites cylinder linear.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권3호
• /
• pp.205-211
• /
• 1998

The purpose of this study is to evaluate shear strengthening effects of R/C beams with carbon fiber sheets. The major variables are shear reinforcement ratios, CFS strengthening ratios and strengthening methods of CFS. Following conclusions can be extracted. The shear capacity of beam strengthened with CFS is about 32~87% higher than that of beams without shear reinforcement. The strengthening effects of patch type is larger than those of strip type. The strain distribution in CFS intersected with shear crack is similar to that in stirrup and larger strain is observed in the middle of the shear span. It can be estimated that shear strength reduction factor ${\alpha}$=0.3 is appropriate for peeling effect of CFS.

• Geomechanics and Engineering
• /
• 제35권5호
• /
• pp.555-570
• /
• 2023

In the current study, a series of experimental and analytical evaluations were performed to introduce the horizontal pseudo static coefficient (kh) as a function of the wall configuration and the reinforcement type for analyzing reinforced soil walls. For this purpose, eight shaking table tests were performed on reduced-scale models of integrated and two-tiered walls reinforced by metal strip and geogrid to determine the distribution of dynamic lateral pressure in the walls. Then, the physical models were analyzed using Mononobe-Okabe method to estimate the value of kh required to establish the dynamic lateral pressures similar to those observed in shaking table tests. Based on the results, the horizontal pseudo static coefficient and the position of resultant lateral force (R) were introduced as a function of the horizontal peak ground acceleration (HPGA), the wall configuration, the reinforcement type as well as maximum wall displacement.

• 콘크리트학회논문집
• /
• 제23권1호
• /
• pp.3-12
• /
• 2011

철근콘크리트 깊은 보의 거동은 전단경간비, 휨철근비, 하중점과 지지점의 조건, 그리고 사용재료의 성질 등의 여러 변수간의 복합적인 역학관계로 인해 매우 복잡하다. 이 논문에서는 이러한 깊은 보의 거동 특성을 모두 반영하여 연속지지 철근콘크리트 깊은 보의 설계를 수행할 수 있는 부정정 스트럿-타이 모델을 제안하였다. 또한 현 스트럿-타이 모델 설계기준을 부정정 스트럿-타이 모델을 이용한 연속지지 철근콘크리트 깊은 보의 설계에 합리적으로 적용하기 위해 외부하중에 대한 단부 지지점 반력의 비인 반력분배율과 수직 트러스 메커니즘에 의해 전달되는 외부하중의 크기 즉 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 하중분배율의 결정 시 연속지지 철근콘크리트 깊은 보의 전단에 대한 연성파괴거동을 확보하기 위하여 깊은 보의 전단저항 메커니즘을 구성하는 콘크리트 스트럿과 수직철근타이가 동시에 파괴된다는 전단평형철근비 개념을 도입하였으며, 다양한 수치해석 결과를 바탕으로 연속지지 깊은 보의 강도 및 거동에 영향을 미치는 전단경간비, 휨철근비, 그리고 콘크리트의 압축강도 등의 주요설계변수를 고려하였다. 이 논문의 후속편에서는 기존의 여러 설계방법들과 이 연구에서 제안한 방법을 이용하여 파괴실험이 수행된 다양한 종류의 연속지지 깊은 보의 강도를 평가하고, 이 연구에서 제안한 방법의 적합성을 검증하였다.

• Structural Engineering and Mechanics
• /
• 제68권3호
• /
• pp.345-358
• /
• 2018

Heterogeneous structure and, particularly, low resistance to tension stresses leads to different mechanical properties of the concrete in different loading situations. To solve this problem, the tension zone of concrete elements is reinforced. Development of the cracks, however, becomes even more complicated in the presence of bar reinforcement. Direct tension test is the common layout for analyzing mechanical properties of reinforced concrete. This study investigates scatter of the test results related with arrangement of bar reinforcement. It employs results of six elements with square $60{\times}60mm$ cross-section reinforced with one or four 5 mm bars. Differently to the common research practice (limited to the average deformation response), this study presents recordings of numerous strain gauges, which allows to monitor/assess evolution of the deformations during the test. A simple procedure for variation assessment of elasticity modulus of the concrete is proposed. The variation analysis reveals different deformation behavior of the concrete in the prisms with different distribution of the reinforcement bars. Application of finite element approach to carefully collected experimental data has revealed the effects, which were neglected during the test results interpretation stage.

• Earthquakes and Structures
• /
• 제17권5호
• /
• pp.435-445
• /
• 2019

The collapses of curved bridges are mainly caused by the damaged columns, subjected to the combined loadings of axial load, shear force, flexural moment and torsional moment, under earthquakes. However, these combined loadings have not been fully investigated. This paper firstly investigated the mechanical characteristics of the bending-torsion coupling effects, based on the seismic response spectrum analysis of 24 curved bridge models. And then 9 reinforced concrete (RC) and circular column specimens were tested, by changing the bending-tortion ratio (M/T), axial compression ratio, longitudinal reinforcement ratio and spiral reinforcement ratio, respectively. The results show that the bending-torsion coupling effects of piers are more significant, along with the decrease of girder curvature and the increase of pier height. The M/T ratio ranges from 6 to 15 for common cases, and influences the crack distribution, plastic zone and hysteretic curve of piers. And these seismic characteristics are also influenced by the compression ratio, longitudinal reinforcement ratio and spiral reinforcement ratios of piers.