• 에너지공학
• /
• 제14권3호
• /
• pp.167-172
• /
• 2005

본 연구에서는 가치에 기반을 두고 배전시스템을 계획할 수 있는 방법을 제시하였다. 우선, 신뢰도를 평가하기 위하여 VBDRA를 도입하였으며, 고조파를 평가하기 위하여 한계가격기법을 도입하였다. 그리고, 신뢰도비용, 고조파비용, 건설비용을 사용하여 가장 경제적인 대체안을 결정을 할 수 있도록 하였다. 제안한 방법을 실제시스템에 적용하여 그 유용성을 입증하였다.

• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.57-62
• /
• 2009

This research was carried out to improve the productivity in the subassembly process of shipbuilding through optimal work planning for the shortest work time. The work time consist of welding time, moving time of gantry, teaching time of robot and robot motion time. The shortest work time is accomplished by even distribution of work and the shortest welding sequence. Even distribution of work was done by appling the simple algorithm. The shortest work sequence was determined by using GA. The optimal work planning decreased the total work time of the subassembly process by 4.1%. The result showed the effectiveness of the suggested simple algorithm for even distribution of work and GA for the shortest welding sequence.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.164-171
• /
• 2008

This paper proposes the planning method for placement of capacitors in a distribution system. The main objectives in the planning for capacitor allocation are the reduction of installation costs and electric power loss. In the proposed method, the life time of each device is considered in calculating installation costs, and the optimal operation status of devices is found by genetic algorithm. Then, the optimal numbers and locations are determined based on the optimal operation status. Simulation results in the 69-bus distribution system show that the proposed method performs better than conventional methods.

• 농촌계획
• /
• 제22권2호
• /
• pp.109-119
• /
• 2016

Most of countries are trying to increase the supply of renewable energy as the substitute of the fossil energy for reducing greenhouse gas emissions. However, renewable energy sources account for only about 3.86% of the total Korea primary energy supply. To increase the rate of renewable energy in Korea's energy consumption, various policies for expanding the use of renewable energy should be applied. Also these policies should be consider renewable energy resources distribution and regional inequality. In this study, the potentials of photovoltaic, wind power and bioenergy from rice straw, livestock waste and food waste are calculated and the distribution characteristic and regional inequalities are analyzed using Gini's coefficient and Gini decomposition method. As the results, technical potentials of photovoltaic and wind power of city region(Gu) has more potential rate than theoretical potentials. Livestock waste has the most unequal distribution (Gini's coefficient: 0.617) among renewable resources.

• 한국유통학회지:유통연구
• /
• 제6권1호
• /
• pp.22-35
• /
• 2001

The focus of Business Process Re-engineering (BPR) has been extended to inter-business process that cuts across independent companies. Combined with Supply Chain Management (SCM), inter-business process reengineering (IBPR) focuses on synchronization of business activities among trading partners to achieve performance improvements in inventory management and cycle time. This paper reviews the business process reengineering movement from the historical perspective and presents a case of inter-business process reengineering using the latest internet-based Business-to- Business (B2B) technology based on Collaborative Planning, Forecasting, and Replenishment (CPFR). The case demonstrates how CPFR technology reengineers the distribution process between Heineken USA and its distributors. As world's first implementor of web-based collaborative planning system, Heineken USA reduces cycle time from determining the customer need to delivery of the need by 50% and increases sales revenue by 10％. B2B commerce on the internet is predicted to grow from $90 billion in 1999 to $2.0 trillion in 2003. This paper provides the management with the bench-marking case on inter-business process reengineering using B2B e-commerce technology.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권1호
• /
• pp.21-29
• /
• 2022

Power generated from renewable energy has continuously increased recently. As the distributed generation begins to interconnect in the distribution system, an accurate generation forecasting has become important in efficient distribution planning. This paper explained method and current state of distributed power generation forecasting models. This paper presented selecting input and output variables for the forecasting model. In addition, this paper analyzed input variables and forecasting models that can use as mid-to long-term distributed power generation forecasting.

• 대한방사선치료학회지
• /
• 제25권1호
• /
• pp.69-75
• /
• 2013

목 적: 경기관지 근접치료에 이용되는 2차원 치료계획의 경우 환부를 확인하는 과정에서 종양의 위치 파악에 어려움이 있어 정확한 치료계획 분석이 어려울 수 있다. 이에 본 연구에서는 전산화단층모의치료기를 이용한 3차원 치료계획으로 환자의 치료계획을 비교 분석하고자 한다. 대상 및 방법: 2012년 6월 본원을 내원한 환자를 대상으로 전산화모의치료장비(Lightspeed RT, GE, USA)와 Oncentra Brachy planning system (Nucletron, Netherland)를 사용하여 3차원 치료계획을 시행하여 2차원 치료계획과 비교 분석하였다. 결 과: 분할 조사로 시행되는 경기관지 근접치료에서 매회 카테터의 위치 파악이 치료계획 상에서 확인 되었고, GTV 용적은 $3.5cm^3$, $3.3cm^3$로 확인 할 수 있었다. 또한 종양의 선량분포 파악이 용이하여 GTV에 대하여 첫 번째 치료 시 처방선량의 92%, 두 번째 치료 시 88%로 파악되어 선량전달 오차를 파악할 수 있었다. 결 론: 2차원 치료계획을 통한 근접치료의 문제점을 보완하기 위하여 치료용적과 선량분포의 정확한 파악과 분석이 가능한 3차원 치료계획으로 검증이 필요하고, 선량전달 오차를 정량적으로 파악하여 치료계획에 반영하는 과정이 필요하다고 생각된다.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.1-10
• /
• 2013

The power industry is currently facing many challenges, due to the new environment created by the introduction of smart grid technologies. In particular, the large-scale deployment of electric vehicles (EVs) may have a significant impact on demand for electricity and, thereby, influence generation and transmission system planning. However, it is difficult to deal with uncertainties in EV charging loads using deterministic planning methods. This paper presents a two-stage stochastic decomposition method with Latin-hyper rectangle sampling (LHRS) to solve the integrated generation and transmission planning problem incorporating EV deployment. The probabilistic distribution of EV charging loads is estimated by Latin-hyper rectangle sampling (LHRS) to enhance the computational performance of the proposed method. Numerical results are presented to show the effectiveness of the proposed method.

• 한국전자거래학회지
• /
• 제7권2호
• /
• pp.143-156
• /
• 2002

The objective of supply chain planning is to satisfy the requirements for minimizing inventory costs, transportation costs, and lead times throughout the supply, production and distribution stage dispersed geographically. Therefore, the supply chain planning system should have functionalities to resolve complex optimization problems that have characteristics of multi-stage and multi-product. Ant the system should also support collaborative decision making among distributed business partners. In this study, we proposed a distributed architecture for the supply chain planning system. To do this, we analyzed functional requirements by using IDEF-0(ICAM Definition-0) methodology, defined required components, and designed each component by using object-oriented methodology. We implemented a prototype system based on CORBA (Common Object Request Broker Architecture) to show that the proposed distributed architecture based on component technology is feasible and can solve supply chain planning problem collaboratively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.619-624
• /
• 1987

A study on distribution automation system suitable to distribution system of KEPCO has started since 1984, and the field trial system for ADS will be operated for testing. This paper will describe project and planning for field trial of KEPCO.