• 지반과기술
• /
• 제3권3호
• /
• pp.15-22
• /
• 2006

The optimum blasting pattern to excavate a quarry efficiently and economically can be determined based on the minimum production cost, which is generally estimated according to rock fragmentation. Therefore, it is a critical problem to predict fragment size distribution of blasted rocks over an entire quarry. By comparing various prediction models, it can be ascertained that the result obtained from Kuz-Ram model relatively coincides with that of field measurements. Kuz-Ram model uses the concept of rock factor to signify conditions of rock mass such as block size, rock jointing, strength and others. For the evaluation of total production cost, it is imperative to estimate 3-D spatial distribution of rock factor for the entire quarry. In this study, a sequential indicator simulation technique is adopted for estimation of spatial distribution of rock factor due to its higher reproducibility of spatial variability and distribution models than Kriging methods. Further, this can reduce the uncertainty of predictor using distribution information of sample data. The entire quarry is classified into three types of rock mass and optimum blasting pattern is proposed for each type based on 3-D spatial distribution of rock factor. In addition, plane maps of rock factor distribution for each ground level are provided to estimate production costs for each process and to make a plan for an optimum blasting pattern.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.416-418
• /
• 2001

This Paper presents the 2-step load cycle of daily load curve for representative load pattern of power distribution transformer. We decide the representative load pattern of distribution transformer in domestic using the pattern classification algorithm. The K-mean method is used for the pattern classification algorithm. The acquisition equipment of field load data is utilized for 96-sample distribution transformers and the field data is used in the construction of the database for the creation of daily load pattern.

• Ocean and Polar Research
• /
• 제29권4호
• /
• pp.391-400
• /
• 2007

To identify the spatial distribution pattern of water quality in Masan Bay, Pearson's correlation as a common statistic method and Moran's I as a spatial autocorrelation statistics were applied to the hydrological data seasonally collected from Masan Bay for two years ($2004{\sim}2005$). Spatial distribution of salinity, DO and silicate among the hydrological parameters clustered strongly while chlorophyll a distribution displayed a weak clustering. When the similarity matrix of Moran's I was compared with correlation matrix of Pearson's r, only the relationships of temperature vs. salinity, temperature vs. silicate and silicate vs. total inorganic nitrogen showed significant correlation and similarity of spatial clustered pattern. Considering Pearson's correlation and the spatial autocorrelation results, water quality distribution patterns of Masan Bay were conceptually simplified into four types. Based on the simplified types, Moran's I and Pearson's r were compared respectively with spatial distribution maps on salinity and silicate with a strong clustered pattern, and with chlorophyll a having no clustered pattern. According to these test results, spatial distribution of the water quality in Masan Bay could be summed up in four patterns. This summation should be developed as spatial index to be linked with pollutant and ecological indicators for coastal health assessment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.646-648
• /
• 1999

Kalman Filter model of demand for residental water and consumption pattern were tested for their ability to explain the hourly residental demand for water in metropolitan distribution system. The hourly residental demand for water is calculated from the daily residental demand and consumption pattern. The consumption pattern which has 24 time rates is characterized by data granulization in accordance with season kind, weather and holiday. The proposed approach is applied to water distribution system of metropolitan areas in Korea and its effectiveness is checked.

• 한국광학회지
• /
• 제21권3호
• /
• pp.97-102
• /
• 2010

전산모사를 통하여 LGP 출력 분포를 조절할 수 있는 패턴 밀도 함수를 찾고 그 효과를 조사하였다. 패턴 밀도 함수, 즉 패턴 간격은 [Pexp(-y/70)+Qexp(+y/25)]R로 조사되었다. 이 함수를 이용하여 패턴의 간격을 조절하는 방식으로 반구형 패턴이 장착된 도광판을 설계하여 도광판 출력 분포를 분석한 결과 출력 분포가 등간격 패턴에 의한 출력 분포에 비하여 확연히 개선되는 것을 확인하였다. 또한 이 함수를 피라미드 패턴에 적용하여 도광판의 출력을 조사하였는데, 반구형 패턴의 경우와 마찬가지로 출력 분포가 개선되는 것을 확인하였다.

• Journal of information and communication convergence engineering
• /
• 제8권3호
• /
• pp.339-342
• /
• 2010

An iris image pattern positioning with preserved edge detector, ring zone and clock zone, frequency distribution and overlay matching is presented in this paper. Edge detector is required to be powerful and detail. That is proposed by overlaying Canny with LOG (CLOG). The two reference patterns are made from allocating each gray level on the clock zone and ring zone respectively. The normalized target image is overlaid with the clock zone reference pattern and the ring zone pattern to extract overlapped number, and make a matched frequency distribution to look through a symptom and position of human organ and tissue. The iterating experiments result in the ring and clock zone positioning evaluation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.89-91
• /
• 2001

This paper presents the result of pattern classification of load demand for distribution transformer in domestic. The field data of load demand is measured using the load acquisition device and the measurement data is used for the database system for load management of distribution transformed. For the pattern classification, the load data and the customer information data are also used. The K-MEAN method is used for the pattern classification algorithm. The result of pattern classification is used for the 2-step format of load demand curve.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.5-10
• /
• 2018

Vacuum-assisted thermoforming is one of the critical steps for successful application of film insert molding(FIM) to parts of complex shape. In this study, the simulations and experiments of thermoforming processes were performed to investigate the effects of process conditions on thickness distribution and printed pattern deformation of films in vacuum-assisted thermoforming. The film thickness uniformity increased with decreasing film heating time, whereas it increased with increasing vacuum delay time. After thermoforming of films with uniform pattern space of 5mm, the maximum space was 9.432mm. Based on the simulation, a modified pattern was calculated to obtain uniform spaces after thermoforming. In the experiments for film with the modified pattern, the maximum space appeared 5.837mm. In, addition. the predicted patterns were in good agreement with the experimental results.

• 한국산업융합학회 논문집
• /
• 제16권2호
• /
• pp.29-33
• /
• 2013

This study has been conducted to propose an optimal design guidance of underfloor air distribution system by examining air pattern and proper exhaust status of floor plenum using CFD (Computational Fluid Dynamics). Simulation shows deficient air pattern and exhaust status at BPG (Bypass Grille) of the current design. As a means to find an alternative design, four cases have been developed and tested. Case 1, 2 and 3 show similar results in comparison to the current design. However, case 4 shows improved air pattern and exhaust status at BPG(Bypass Grille), and has been chosen as the optimal alternative.

• 국제물리치료학회지
• /
• 제9권3호
• /
• pp.1537-1542
• /
• 2018

This study aimed to identify the effects of kinesio taping (KT) applied in a proprioceptive neuromuscular facilitation (PNF) pattern on the pain, weight-bearing distribution (WBD), and walking ability of knee osteoarthritis (KOA) patients. Thirty women with KOA were randomly allocated to a control group (n=15) with KT at the quadriceps only, and a PNF pattern group (n=15) with KT at the quadriceps and gastrocnemius muscle. Pain intensity was measured using a visual analogue scale during walking. In addition, WBD, and walking ability were measured before and 30 minutes after KT application. The VAS significantly reduced in both groups after the intervention (p<.05). WBD (p<.05, ES=.32) and walking ability (p<.05, ES=.38) showed a significant change in the PNF pattern group, and in the inter-group comparison, the PNF pattern group showed a significant difference compared to the control groups. These results demonstrate that KT application with PNF pattern effectively attenuate the pain and improves WBD and walking ability in KOA patients.