• Korean Journal of Construction Engineering and Management
• /
• v.4 no.4 s.16
• /
• pp.155-163
• /
• 2003

There are a growing number of cases to expand balconies of apartments faced with open air in order to enhance functional satisfaction and efficiency of dwelling space. In case of the balcony expansion at the floor, however, it is difficult to exclude a possibility of bringing about internal condensation due to the difference of temperature between indoor air and outdoor air caused by the Inflow of outer low-temperature air through the upper part of ceilings by failure in completely putting together the outer composite wall panels on the aluminum curtain walls installed at outer walls This study is to forecast possible occurrence of internal condensation around parapets and H-beam located at the inside of balcony ceilings on the uppermost floor of super-high apartment buildings faced with open air in order to provide dwellers with more comfortable environment in the related space and get rid of their uneasiness about the condensation. In this study, we estimated internal condensation, which vary in accordance with humidity pressure distribution, at curtain walls, stone panels or lower parts of slabs that constitute outer space of the residence and are weak against heat, through temperature forecast and temperature distribution interpretation program at normal two-dimension temperature

• Journal of Global Scholars of Marketing Science
• /
• v.16 no.1
• /
• pp.13-26
• /
• 2006

In this research, we develope a procedure for detecting a random non-stationarity to the individual's purchasing rate in a stationary NED model. On this purpose, we derive the likelihood ratio statistic for a testing null and alternative hypotheses defined as whether there is no significant structural change in a stationary NED model or any. Where the structural change comes from a random non-stationarity(marketing mix activities or seasonality, for example) to the individual's purchasing rate. We also apply the developed method to a panel data for a frequently purchased good. This research could be a solution to include the non-stationarity in a stationary NED model. We also expect that the developed model could give a signal for an early detection of significant changes in marketing environment, and a mean for a measurement of the effects of marketing mix activities.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.165-170
• /
• 2006

Using the somatic cell hybrid panel (SCHP) and radiation hybrid (IMpRH) panel, porcine SOCS2 gene was mapped at SSC5 (1/2) q21-q24 and closely linked with SW1383 marker (47 cR in distance), while SOCS3 gene was assigned to SSC12p11-(2/3p13) and closely linked with SW2490 (43 cR). The reverse transcriptase-polymerase chain reaction (RT-PCR) was performed to detect the expression of these two genes in the different tissues and the results showed that both SOCS2 and SOCS3 genes were widely expressed in tissues investigated (heart, liver, spleen, lung, kidney skeletal muscle, fat and brain), although some tissues showed lower gene expression. Moreover, SOCS2 and SOCS3 genes had different expression levels at different stages, in different tissues and in different breeds. A G/A substitution, which can be recognized by restriction enzyme of Cfr421, was observed in 5' untranslated region (5'-UTR) of SOCS2 gene. The allele frequencies was investigated by PCR-restriction fragment length polymorphism (PCR-RFLP) method and it showed that the allele frequency among Dahuabai, Erhualian, Yushan, Qingping, Large white and Landrace tested were different. Association analysis in a cross experimental populations revealed no significant association between the SOCS2 gene polymorphism and the economic traits investigated. The full-length coding regions (CDs) of porcine SOCS3 gene was obtained by RT-PCR.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.726-728
• /
• 2013

Optoelectronic arc discharge sensor was used to detect arc discharge inside power distribution panel. Arc discharge is fatal to power system once it begins, thus preventive detection is necessary before power failure occurs. Optoelectronic detection method was used to avoid direct electrical contact to power apparatus inside power distribution panel. 180 degree detection angle and detection range far exceeding 6m, which was sufficient for monitoring purpose, was achieved using the photodiode having $7.5mm^2$ of active surface area and flash source with $0.4cal/cm^2$ energy density, which is equivalent to 1.9J with $2.16cm^2$ emitting area. The response speed of arc discharge sensor was measured to be below 1 msec. The above optoelectronic arc discharge sensor was measured to be sensitive enough to detect 0.94 pC charge.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.18-27
• /
• 2000

Even the same materials are assembled in flush door skin panel, warping is not simply prevented under the changes of environmental conditions since wood and wood-based material have large variations in their physical and mechanical properties. The parameters such as linear movement coefficient(LMC), modulus of elasticity (MOE), required to predict warping could be estimated by oven drying method and dynamic method instead of American Society for Testing Materials(ASTM) procedure. The relationship between warping and LMC was curvilinear, while it between warping and MOE was linear. LMC had a larger effect on warping than MOE. Material propensity of skin panel such as hardboard and plywood showed normal distributions. The variation of material properties, however, was much larger in plywood than in hardboard. Monte Carlo simulation also indicated that rejection ratio of flush door due to the occurrence of warping could be predicted with consideration of the relationship of warping and parameters of probability distribution of MOE, LMC, and moisture content.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.3
• /
• pp.310-323
• /
• 2023

Urbanization and income distribution issues are global interest, and the results of studies on the impact of urbanization on income inequality are different for each country and period. This study analyzes the impact of urbanization on income inequality using regional data from 2000-2021. In particular, serial correlation, spatial dependence, and common factor effects of the Gini coefficient are confirmed and analyzed through a dynamic spatial panel regression model. As a result, urbanization has a positive effect on reducing income inequality. Therefore, it is necessary to continuously promote regional urbanization to improve the income distribution problem. Areas with already high urbanization rates should reduce income inequality by narrowing the wage gap by expanding training opportunities for low-skilled workers, and need to come up with measures to prevent counter-urbanization.

• International Journal of Advanced Culture Technology
• /
• v.12 no.2
• /
• pp.368-374
• /
• 2024

During an X-ray examination, the beam of radiation is dispersed in many directions. We believe that managing radiation dose is about providing transparency to users and patients in the accurate investigation and analysis of radiation dose. The purpose of measuring the radiation dose as a function of location is to ensure that medical personnel using the equipment or participating in the operating room are minimally harmed by the different radiation doses depending on their location. Four mobile diagnostic X-ray units were used to analyze the radiation dose depending on the spatial location. The image intensifier and the flat panel detector type that receives the image analyzed the dose by angle to measure the distribution of the exposure dose by location. The radiation equipment used was composed of four units, and measuring devices were installed according to the location. The X-ray (C-arm) was measured by varying the position from 0 to 360 degrees, and the highest dose was measured at the center position based on the abdominal position, and the highest dose was measured at the 90° position for the head position when using the image intensifier equipment. The operator or medical staff can see that the radiation dose varies depending on the position of the diagnostic radiation generator. In the image intensifier and flat panel detector type that accepts images, the dose by angle was analyzed for the distribution of exposed dose by position, and the measurement method should be changed according to the provision of dose information that is different from the dose output from the equipment according to the position.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.77-84
• /
• 2023

As the installation of solar panel accelerates, so does the number of solar panels reaching their end-of-life (EOL). However, the EOL solar panels is becoming a concern, as they contain potentially hazardous materials and are not easily recycled. Coping strategies such as effective collection, disposal, and recycling methods will be important to manage the growing number of EOL solar panels in the coming years.Therefore, many studies have focused on the development of EOL solar panel recycling technology. One recycling technology for EOL solar panels applicable to the construction field is the application of extracted tempered glass from EOL solar panels as construction materials. This study summarized the EOL solar panel disassembly technology and evaluated the mechanical properties of mortar using extracted tempered glass as fine aggregate. The results showed that when tempered glass was used as a fine aggregate in mortar, the compressive strength, flexural strength, and macro pores in the 1-3 ㎛ with 200-300 ㎛ range were affected, regardless of the disassembly technology of EOL solar panels. Especially, we found that the mechanical performance of mortar using chemically treated tempered glass was noticeably decreased due to changes in the chemical composition of the extracted tempered glass resulting from the removal of K₂O and CuO due to chemical reactions. Meanwhile, it was found that when fly ash was used as a binder, the reduction of mechanical performance could be alleviated.

• The Journal of Korean Medicine
• /
• v.35 no.3
• /
• pp.22-31
• /
• 2014

Objectives: The aim of this study was to identify the complementary and substitute relationships between the use of Korean medicine (KM) and that of Western medicine (WM) in the treatment of musculoskeletal disease. Methods: We analyzed the 2009 Korea Health Panel dataset. General characteristics and the medical utilization of respondents were analyzed descriptively. Logistic regression, negative binominal regression, and Tobit regression analysis were used to identify the relationships between the use of KM and the use, visit frequency, and expenses of WM, respectively. Results: In the treatment of musculoskeletal disease, KM use and non-herbal treatments with Korean medicine significantly reduced WM use. Herb medication use significantly increased WM visit frequency. There were no significant relationships between KM use and WM expenses. Conclusions: There are substitute relationships between WM use and KM use, especially non-herbal treatments in KM. Therefore we need to develop the clinical protocols of KM and WM treatments in the treatment of musculoskeletal disease for proper distribution medical resources.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.593-604
• /
• 2020

This study analyzes human development convergence and the impact of funds transfer to the regions using σ and β-convergence analysis method. Observations were made in all Indonesia's provinces in the period 2010-2019. The coefficient of variation calculation shows a dispersion in the inequality of human development, which means that convergence occurred. This is also documented by the clustering analysis results developed in the study. The results are in line with the hypothesis of neoclassical theory, which shows the tendency for provinces with lower human development levels to grow relatively faster. The dynamic panel data approach with the GMM model shows that a model built with explanatory variables for transfer of funds to regions may lead to the process of convergence of human development - 2.21% per year or 31 years to cover the half-life of convergence. This is a consequence of the Special Allocation Fund and the Village Fund, which positively impact the convergence process, and the General Allocation Fund and the Revenue Sharing Fund with negative signs slowing the convergence process. This evidence opens opportunities to review the justification of the weighting component in determining the amount of funds transferred to the region to accelerate the convergence process of human development.