• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국토양비료학회지
• /
• 제45권3호
• /
• pp.344-352
• /
• 2012

시설재배지는 주로 하성평탄지 등 평평한 지형에 분포하며, 밭과 과수원은 곡간 및 선상지, 구릉지 및 산악지, 산록경사지 등 경사지에 분포한다. 논은 곡간 및 선상지, 하성평탄지, 하해혼성평탄지 등 비교적 완만한 경사에 위치한다. 이처럼 토지이용별로 분포하는 지형이 각기 다르기 때문에 토지이용별로 물리성 기준을 설정하고 관리하는 것이 필요하다. 시설재배지는 배수 및 양수분의 수직이동에 유의하여야 하며, 경사지는 침식과 양분유출에 대비하여 관리하여야 한다. 토지이용별로 토양 물리성 평균은 다음과 같다. 시설재배지는 표토심이 16.2 cm, 표토에 대한 물리성은 항목별로 경도 9.0 mm, 용적밀도 1.09 Mg $m^{-3}$, 유기물함량 29.0 g $kg^{-1}$, 심토에 대한 물리성은 항목별로 경도 19.8 mm, 용적 밀도 1.32 Mg $m^{-3}$, 유기물함량 29.5 g $kg^{-1}$ 이었다. 뿌리가 얕게 뻗는 작물에 대해서 표토심이 낮고 용적밀도가 높은 값을 보였다. 밭은 표토심이 13.3 cm, 표토에 대한 물리성 은 항목별로 경도 11.3 mm, 용적밀도 1.33 Mg $m^{-3}$, 유기물 함량 20.6 g $kg^{-1}$ (표토), 심토에 대한 물리성은 항목별로 경도 18.8 mm, 용적밀도 1.52 Mg $m^{-3}$, 유기물함량 13.0 g $kg^{-1}$ 이었다. 작물별로 물리성 평균치는 엽채류 < 과채류 < 장근채 ${\fallingdotseq}$ 단근채 순으로 값을 보였다. 과수원은 표토심이 15.4 cm, 표토에 대한 물리성은 경도 16.1 mm, 용적밀도 1.25 Mg $m^{-3}$, 유기물함량은 표토 28.5 g $kg^{-1}$, 심토에 대한 물리성은 경도 19.8 mm, 용적밀도 1.41 Mg $m^{-3}$, 유기물함량 15.9 g $kg^{-1}$ 이었다. 조사지점이 가장 많았던 과수 배는 표토심 14.4 cm, 경도 16.4 mm (표토), 19.7 mm (심토), 용적밀도 1.23 Mg $m^{-3}$ (표토), 1.40 Mg $m^{-3}$ (심토) 으로 평균에 근접한 값을 보였으며, 포도는 표토심 17.0 cm 경도 16.7 mm (표토), 20.0 mm (심토), 용적밀도 1.31 Mg $m^{-3}$ (표토), 1.45 Mg $m^{-3}$ (심토) 로 비교적 큰 값을 보였다. 논은 표토심 이 17.5 cm, 표토에 대한 물리성은 항목별로 경도가 15.3 mm, 용적밀도가 1.22 Mg $m^{-3}$, 유기물 함량은 23.5 g $kg^{-1}$, 심토에 대한 물리성은 항목별로 경도 20.3 mm, 용적밀도 1.47 Mg $m^{-3}$, 유기물 함량 17.5 g $kg^{-1}$ 이었다. 토지이용별로 용적밀도 평균치는 시설재배지 < 논 < 과수원 < 밭 순이었으며, 용적밀도 값의 분포는 표토는 1.0~1.25 Mg $m^{-3}$에서 가장 많았으며, 심토는 밭토양과 논토양은 1.50 Mg $m^{-3}$ 이상에서 50% 내외, 과수원토양은 1.35~1.50 Mg $m^{-3}$에서 40%로 가장 많았고, 시설재배지는 1.0~1.50 Mg $m^{-3}$에 고루 분포하였다. 토성 (속)별로는 대체로 식질에서 작은 값을 보였고, 미사식양질과 사질에 큰 값을 보였다. 토지이용과 토성에 따라 물리성 차이가 분명하였으며, 따라서 이러한 특성을 고려하여 토양 물리성 관리 기준을 설정하여 건전한 작물생육 환경을 유지하고 조성하는 것이 필요하겠다.

• 핵의학기술
• /
• 제20권2호
• /
• pp.54-61
• /
• 2016

1. 목적 성조숙증은 2차성징의 발달이 여아에서는 8세 이전 남아에선 9세 이전에 조기 2차성징이 출현하는 증상으로 골단의 조기 폐쇄를 일으켜 결국 최종 성인 신장의 감소를 가져오는 질환이다. 본 연구는 성조숙증으로 내원한 여아들의 GnRH(Gonado-tropin-releasing Hormone) 자극검사 결과와 의무기록을 후향 분석하여 진단별 차이를 알아보고자 하였다. 2. 방법 2015년 2월부터 2015년 12월까지 분당서울대병원 소아청소년 내분비내과를 내원한 여아 118명을 대상으로 하였다. 의무기록을 후향 분석하여 대상 환아들은 진성 성조숙증(true precocious puberty) 57명, 조기사춘기(early puberty) 39명, 유방 조기발육군(premature thelarche) 22명을 진단별로 분류하였다. 진단 당시의 신장, 체중, Tanner stage, 골연령, 역연령, 부모의 키, GnRH 검사에서 LH, FSH와 E2 (Estradiol) Basal 값도 함께 조사하였다. 성선 자극호르몬 결과값 LH (Basal,30min,45min,60min) FSH(Basal,30min,60min)을 비교하여 각 그룹별 LH, FSH Peak치 분포도와 LH 최고치/LH 기저치 비율에 대한 평균${\pm}$표준편차와 LH 최고치/FSH 최고치 비율에 대한 평균${\pm}$표준편차를 비교하여 각 3그룹 간 유의확률(P-value) 값을 구하였다. 골연령의 측정은 Greulich-Pyle법(왼쪽 수근골 X선 사진을 촬영하여 골성숙도를 평가하는 방법- 6개월 단위의 표준손목사진을 보고 비교해서 골연령을 유추하는 방식)을 이용한 소아 청소년 내분비내과 교수가 직접 판독한 결과로 사용하였고 GnRH 검사는 합성 LHRH 100 ug을 정맥 주사하여 LH는 Basal, 30분, 45분,60분 후에 채혈된 결과값과 FSH는 Basal, 30분, 60분후에 채혈된 결과값을 조사하였다. 3. 결과 진성성조숙증그룹의 평균 키는$131{\pm}14.85$, 평균체중은 $8.80{\pm}4.93$, 평균역연령은 $7.1{\pm}0.81$, 평균 골연령은 $9.9{\pm}0.9$, 조기사춘기 그룹의 평균키는 $134{\pm}5.10$, 평균체중은 $28.50{\pm}4.43$, 평균역연령은 $8.05{\pm}0.03$, 평균 골연령은 $10.0{\pm}0.62$, 유방조기발육군의 평균 키는 $129{\pm}6,01$ 평균체중은 $28.65{\pm}5.98$, 평균역연령은 $7.02{\pm}0.58$ 평균 골연령은 $8.04{\pm}1.29$로 세 그룹간에 키와 체중 비교 시 유의한 차이가 없었고 역연령(P < 0.0001), 골연령( P< 0.0001), 골연령과 역연령과의 차이(P < 0.0002 )에서는 그룹간 유의한 차이가 있었다. 각 그룹별 LH, FSH Peak치 분포도 비교시 진성성조숙증 그룹은 LH 30분-82.5%, 45분-12.3%, 60분-5.3%, FSH 30분-8.8%, 60분-91.2%로 높은 Peak치를 보였고 조기사춘기 그룹은 LH 30분-79.5%, 45분-17.9%, 60분-2.6%, FSH 30분-7.7%, 60분 -92.32%로 높은 Peak치를 나타내었다. 유방조기 발육군 그룹에서는 LH 30분-30%, 45분-59%, 60분-9.09%, FSH 30분 -0%, 60분-100%로 Peak치를 나타내었다. LH Peak/LH basal ratio 비교시 진성성조숙증 그룹은 $19.09{\pm}17.15$, 조기사춘기 그룹은 $15.23{\pm}10.88$ 유방조기 발육군 그룹은 $4.93{\pm}4.36$으로 3 그룹간 유의한 차이를 보였다(P < 0.0001). LH Peak/FSH Peak ratio 비교시 진성성조숙증 그룹은 $1.222{\pm}0.77$, 조기사춘기 그룹은 $1.34{\pm}1.23$ 유방조기 발육군 그룹은 $0.3{\pm}0.09$로 3 그룹간 유의한 차이(P < 0.0001)를 보였다. 4. 결론 여아들의 진성성조숙증을 진단하기 위한 GnRH Test 검사는 자극 후 30분과 60분 사이에 LH 최고치가 기저치에 비해 2~3배 이상 증가 되어 있거나 또는 5~10 IU/L 이상 증가되었을 때 유용한 판정 자료로 이용 될 수 있는 핵의학 연속검사라고 사료되어진다.

• 핵의학기술
• /
• 제20권1호
• /
• pp.32-36
• /
• 2016

핵의학검사에서 $^{131}I$은 갑상선암 및 질환의 진단, 치료등 핵의학 검사에서 많이 사용되고 있다. $^{131}I$은 ${\gamma}$선과 ${\beta}^-$선을 방출하여 검사와 치료를 할 수 있고, 높은 집적율과 신장을 통한 빠른 배설이 용이 하지만, $^{131}I$(364 keV)은 $^{99m}Tc$(140 keV)보다 고에너지이기 때문에 작업을 수행 시 조작 및 투여 과정에서 $^{99m}Tc$보다 술자의 피폭을 줄이기 위해 외부피폭 방어의 3요소인 거리, 시간, 차폐 중에 차폐에 주안점을 두어 $^{131}I$ 조작 시 차 폐체 착용 전과 후의 피폭선량의 차이를 비교하고자 한다. Apron(보통 Pb 0.5 mm) 착용 시 $^{99m}Tc$은 90%이상이 차폐가 되지만, $^{131}I$은 고에너지이기 때문에 차폐효과가 비교적 낮고, 고용량의 경우 산란선(2차) 및 제동방사선의 영향으로 오히려 더 피폭을 받을 수 있다. 하지만 저용량(74 MBq) 고에너지의 경우 이에 대한 특별한 보고나 Guide Line이 마련되어 있지 않아, $^{131}I$ 조작 시 Apron 착용 유무에 따른 술자의 피폭선량을 정량적으로 분석하고자 한다. 본원 핵의학과에서 2014년 6월부터 2014년 12월까지 7개월 동안 갑상선암 치료 및 진단을 위한 저용량$^{131}I$을 투여하기 위해 방문한 갑상선암 환자를 대상으로 준비과정부터 투여 시까지 연구기간 동안 갑상선, 가슴, 고환 3곳에 Apron 안쪽과 바깥쪽 각각 1개씩 총 6개의 TLD를 부착한 뒤 $^{131}I$검사 과정부터 투여 시 까지의 방사선 피폭선량을 측정하였다. 총 작업시간은 설명시간 3분, 분배시간 1분, 투여시간 1분으로 각각 1인당 5분이내로 설정하였다. TLD 위치설정은 일반적으로 피폭선량을 측정하는 가슴과 방사선 감수성이 높은 갑상선 및 고환으로 설정하였다. 준비과정은 $^{131}I$을 $2m{\ell}$ 주사기를 이용해 74MBq을 분배한 뒤 생리식염수와 희석해 $2m{\ell}$의 용량을 만들어 분배한다. $^{131}I$을 분배 후 환자에게 투여 시 컵에 물을 $100m{\ell}$ 담고 분배한 $^{131}I$을 희석하여 환자 1 m 정도 거리를 두고, 경구투여 한다. 그리고 경구투여 한 $2m{\ell}$ 주사기와 컵을 폐기하는 과정을 Apron과 TLD를 착용한 상태에서 시행하였다. Apron과 TLD는 방사선 피폭이 미치지 않는 보관실에 따로 보관하였고, 서울방사선 서비스에 의뢰하여 피폭선량을 측정하였다. 연구기간 동안 저용량 $^{131}I$ 검사 시 갑상선, 가슴, 고환 부위에 Apron 안과 밖d[착용한 TLD의 매월 누적선량을 인원수로 나눈 결과를 가지고, SPSS Version. 12.0K를 이용해 Wilcoxon Signed Rank Test를 사용하여 통계를 시행하였다. 그 결과 갑상선(p = 0.345), 가슴(p = 0.686), 고환(p = 0.715)은 모두 p > 0.05으로 유의한 차이가 없음을 알 수 있었다. 그리고 연구기간 동안의 총 누적선량의 변화를 백분율로 환산하였을 때, 갑상선 -23.5%, 가슴 -8.3%, 고환 19.0%로 나타났다. Wilcoxon Signed Rank Test를 사용한 결과 통계적으로 유의한 차이가 없는 것으로 나타났다(p > 0.05). 또한 7개월간의 누적선량으로 차폐율을 계산 했을 때 에는 Apron 안쪽과 바깥쪽의 피폭선량의 변화가 불규칙적으로 나타나는 결과를 보였다. 이 결과는 백분율로 표현 시 변화폭이 커보이지만, 누적 피폭선량이 소수점 이하이므로 큰 변화라고 보기 어렵다. 그러므로 고에너지 저용량 $^{131}I$ 투여 시 Apron을 착용유무와 상관없이 일정한 거리를 두고 최대한 빠른 시간 내에 투여를 종료하는 것이 피폭선량을 줄이는 데 도움이 될 것이다. 본 연구는 $^{131}I$ 투여시간을 1인당 각 5분 이내로 투여 할 수 있도록 제한하고, 거리를 1 m로 일정하게 하여 작업 할 수 있도록 하였으나 통계 시 N수가 적어서 비모수적인 방법으로 통계를 시행함으로써 정확한 결과를 얻기에 부족한 부분이 있었다. 또한 저용량 $^{131}I$ 투여 시 각 1인당 피폭선량을 직독식 선량으로 측정하지 못하고, TLD를 이용한 누적선량으로 측정한 결과 값이므로 전자선량계 및 포켓선량계를 이용한 측정이 이루어진다면 더 효과적인 결과를 얻을 수 있을 것으로 사료된다.

• 한국토양비료학회지
• /
• 제25권3호
• /
• pp.202-212
• /
• 1992

화강암(花崗岩), 화강편마암(花崗片麻岩), 석회암(石灰岩), 혈암(頁岩), 현무암등(玄武岩等) 우리나라의 주요(主要) 모암(母岩)에서 발달(發達)된 토양(土壤)을 대상(對象)으로 점토광물(粘土鑛物)의 생성과정(生成過程)을 구명(究明)하기 위하여 모암(母岩)의 조암광물(造岩鑛物)과 토양(土壤)으로 부터 분리(分離)한 모래와 미사(微砂)의 1차광물(次鑛物) 분포(分布)와 광물학적(鑛物學的) 특성변화(特性變化)를 보고(報告)한 바 있다. 본보(本報)에서는 점토(粘土)에 대한 화학조성(化學組成), 광물(鑛物)의 분리동정(分離同定) 및 특성변화(特性變化)를 기(旣) 보고(報告)된 성적(成績)과 관련(關聯)시켜 고찰(考察)함으로써 각 토양점토광물(土壤粘土鑛物)의 풍화생성과정(風化生成過程)을 모암(母岩)의 조암광물(造岩鑛物)로 부터 종합적(綜合的)으로 구명(究明)코자 하였으며, 아울러 점토광물(粘土鑛物)의 정량화(定量化)를 시도(試圖)하였던 바 그 결과를 요약(要約)하면 다음과 같다. 1. 점토(粘土)의 양(陽)이온치환용량(置換容量)은 vermiculite, chlorite 또는 illite 함량(含量)이 많을 수록 크며, vermiculite 함량(含量)이 많은 점토(粘土)라도 수산화물(水酸化物)의 층간침입(層間侵入) 정도(程度)가 크면 양(陽)이온치환용량(置換容量)은 적어지는 경향(傾向)이었다. 2. 화강암(花崗岩)과 화강편마암(花崗片摩岩)의 장석류(長石類)는 kaolin광물(鑛物)로 대부분 풍화(風化)되었고, 이밖의 운모광물(雲母鑛物), 연이석(緣泥石), 각섬석(角閃石), 휘석(輝石)으로 부터 생성(生成)된 illite, chlorite, vermiculite는 풍화중간(風化中間)에 illite/vermiculite와 illite/chlorite, 그리고 chlorite/vermiculite의 혼층단계(混層段階)를 거치게 되고 최종적(最終的)으로 kaolin광물(鑛物)로 풍화(風化)되는 것으로 판단(判斷)되며 vermiculite에 수산화물질(水酸化物質)의 층간침입정도(層間侵入程度)는 표토(表土)로 갈수록 증대(增大)되는 경향(傾向)이었다. 3. 석회암(石灰岩) 토양(土壤)의 점토(粘土)에는 smectite가 상당량(相當量) 함유(含有)되었으며, 이는 Mg농도(濃度)가 높은 토양용액(土壤溶液)으로 부터 직접(直接) 침전(沈澱)되어 생성(生成)되었거나, 운모(雲母) 또는 chlorite에서 유래(由來)된 vermiculite의 변성작용(變成作用)에 의해 생성(生成)되는 것으로 해석(解釋)되었다. 4. 혈암(頁岩) 토양(土壤)의 점토(粘土)에 다량(多量) 존재(存在)하는 illite는 주로 풍화(風化)에 저항성(抵抗性)이 큰 미립자(微粒子)의 함수백운모(含水白雲母)로 유래(由來)되는 것으로 보이며, 토양(土壤)의 발달정도(發達程度)에 따라 함수백운모(含水白雲母)${\rightarrow}$illite/vermiculite 풍화단계(風化段階)(대구통(大邱統))와 풍화(風化)가 더욱 진전(進展)된 함수백운모(含水白雲母)${\rightarrow}$illite/vermiculite${\rightarrow}$vermiculite${\rightarrow}$kaolin의 풍화단계(風化段階)(부여통(扶餘統))로 구분(區分)되었다. 5. 현무암(玄武岩)의 사장석(斜長石)은 주로 kaolin광물(鑛物)로 풍화(風化)되고, 휘석(輝石)은 휘석(輝石)${\rightarrow}$chlorite${\rightarrow}$chlorite/vermiculite${\rightarrow}$kaolin의 과정(過程)을 밟지만 illite와 illite/vermiculite의 존재(存在)로 보아 휘석(輝石)${\rightarrow}$chlorite${\rightarrow}$illite의 풍화과정(風化過程)도 인정(認定)되었다. 6. 열분석(熱分析)(DTA, TG)에 의한 점토광물(粘土鑛物)의 정량결과(定量結果), vermiculite 함량(含量)은 석회암(石灰岩) 장성통(長城統)에서 21.7%로 가장 많았고, 혈암(頁岩)의 부여통(扶餘統)은 9.2%, 대구통(大邱統)은 5.4%로 적었으며, 나머지 토양(土壤)은 8.8%~28.3% 함유(含有)하고 있었다. Kaolin 광물(鑛物)의 함량(含量)은 화강편마암(花崗片麻岩)의 아산통(雅山統)에서 32.7%, 현무암(玄武岩)의 구엄통(舊嚴統)에서 32.0%로 많았고 석회암(石灰岩)의 평안통(平安統) 14.9%, 장성통(長城統) 9.4%로 적었으며, 혈암(頁岩)의 대구통(大邱統)에서 8.9%로 가장 적었다. 이밖의 토양(土壤)에서의 kaolin 함량(含量)은 20.0%~28.6%이었다. Gibbsite함량(含量)은 화강암(花崗岩)의 월정통(月精統)에서 3.9%, 차항통(車項統)에서 2.3%, 화강편마암(花崗片麻岩)의 아산통(雅山統)에서 1.4%, 청산통(靑山統)에서 4.5%, 그리고 현무암(玄武岩)의 장성통(長城統)에서 3.6%이었다.

• Advances in pediatric surgery
• /
• 제8권2호
• /
• pp.143-155
• /
• 2002

설문 문항에 따라 심도 있는 토의가 진행된 내용을 요약 하면 다음과 같다. 문항 1의 영아 황달 환자의 감별진단을 위한 검사에 대한 토론에서 복부초음파검사가 과거에는 담즙정체 환자에서 선별검사 목적으로 시행되었으나 1992년 부터 일부에서는 좀 더 확실한 진단 방법으로 이용하려는 견해가 있음이 소개되었다. 또한 Triangular cord sign (TC sign)은 문맥 앞쪽에 있는 삼각형이나 띠 모양의 반사성 (echogenecity)을 나타낸다는 것과 이 반사성은 간문맥섬유화 종괴를 조영하는 것으로 이 반사성 두께가 2.5mm면 담도폐색증으로 진단할 수 있다고 하는 TC sign에 근거한 진단방침에 대한 논의가 있었으나, 아직은 충분히 검증된 방법으로 보기는 어렵다는 견해도 함께 제시되었다. 문항 8의 간문맥 부위의 시야를 좋게 하기 위한 토론에서는 소아의 복부는 좌우 옆으로 발달이 되어 간의 현수인대와 간의 좌우 삼각인대 (triangular ligament)와 낫인대 (falciform ligamnet)를 잘라내면 간이 쉽게 배 밖으로 나오게 돼며, 수술 시야가 양호해 진다는 의견이 제시되었다. 피부 절개선을 간의 가장자리 보다도 한 횡지 위 쪽으로 넣는 것과 간을 너무 당기면 하대정맥에 각이 져서 순환허탈이 올 수 있다는 점이 주의사항이라고 하였다. 문항 9 portal fibrous mass 의 절제범위에 대한 토론에서는 양쪽 외측에서 담즙 배출이 많이 되므로 가능하면 양쪽 외측으로 많이 나가야 되며 좌우 간동맥 안쪽으로 절제하고 뒤쪽은 문맥 분기 뒤쪽의 정상 간 표면이 나올 때까지 절제한다는 의견이 있었고, 외측으로 가는 범위는 혈관 밖에까지 가는 것이 좋으며 혈관 위에는 문합이 불가능하므로 장이 혈관을 overriding하도록 장을 그냥 씌우면 된다는 의견이 있었으나 반면 좌우 간동맥 사이의 간표면에서 절제하는 정도만 해도 최선이며 무리하다 오히려 간동맥에 손상을 주변 담도의 혈류가 차단되어 세담관 증식에 장애가 된다는 의견도 있었다. 확장절제를 위해 좌.우 간문맥 두번째 분지까지 절제하면 절제면이 약 3 cm 크기가 되고 그 부위에다 넓게 장문합을 하며, 절제 깊이는 간실질까지 들어가는 것을 피하기 위하여 fibrous mass 기저부를 일부 남기면서 간표면을 따라 조심스럽게 절제한다는 의견이 있었다. 이를 위해 retractor를 효과적으로 사용하면 간문맥 제2분지까지 접근 가능하므로 가능한 한 깊이 절제하는 것이 좋다고 하였으나 한편 담도폐색증에서는 혈관기형이 많이 동반되어 혈관손상 위험이 있으므로 몇 번째 분지까지 절제하여야하는가 보다는 위험하지 않을 정도로 외측으로 갈수 있는 데까지 가는 것이 좋다는 의견도 있었다. 일반적으로 Kasai 수술의 목적 'cure' 내지는 'improvement' 되는 것이라고 본다면, Kasai술식에서 fibrous mass를 공격적으로 절제해서 효과적인 담즙배액을 성취할 수 있는지, 또는 장기간 추적조사에서 정말 훨씬 좋은 결과를 얻을 수 있는지를 비교하여야 하므로 아직은 충분히 검정되지 않은 의견으로 보아야 한다는 견해도 제시되었다. 문항 13의 담도폐색증 수술 후 통상적으로 처방하는 약제의 복용기간은 회원마다 상당한 차이가 있었다. 즉, Ursodeoxycholic acid (우루사)는 한달에서 부터 2년까지 또는 더 오랜 동안 처방한다는 의견도 있었고, systemic antibiotics도 2주에서 2년까지 처방 기간이 다양하였으며, 스테로이드는 대부분 2 - 3주 사용하고 있다고 하였다. 본 조사 결과는 18개 병원에서 21년 동안 대한소아외과학회 회원들이 경험한 환자들의 병록지를 후향적으로 조사한 것을 분석한 것으로서 80년대 초반의 환자 증례는 매우 제한적 일 뿐만 아니라 많은 수의 기록지가 불충분하거나 일치되지 않은 기술로 인해 자료로서 한계가 있었다. 그럼에도 불구하고 본 조사에서 얻은 결과의 분석은 회원들의 수련 배경이나 진료 환경이 다를지라도 담도폐색증의 진단 및 치료에 있어서 기본 원칙에는 매우 일치된 시술이 진행되고 있음을 알 수 있다. 다만 수술 소견에 따른 담도폐색증의 분류나 조직학적 기술에서는 보완을 요한다고 하겠다. 따라서 이 결과를 외국의 통계분석과 비교하는 것보다는 회원들의 향후 진료와 전향적 연구에 참고가 될 수 있다는 것에 의미를 두고자 한다. 또한 담도폐색증이 매우 드문 질환임은 분명하나 전국적인 조사에서는 적지 않은 예가 모아질 수 있으므로 회원들이 동일한 등록지를 작성하여 시행되는 전향적 연구에서는 우리나라 담도폐색증에 대한 분류, 치료 성적, 예후 인자들도 더 정확한 결과를 얻을 수 있을 것이다. 이를 위해 본 조사에서 사용하였던 등록지를 약간 수정보완한 ‘담도폐색증 등록지’를 학회에서 향 후 전향적 연구를 위해 인정해주기를 제안하는 바이다 (Biliary Atresia Entry Forrn).

• 한국산림과학회지
• /
• 제52권1호
• /
• pp.58-71
• /
• 1981

충남(忠南) 전북지방(全北地方) 적송림(赤松林)의 천이과정(遷移過程)을 연구(研究)하기 위하여 솔잎혹파리의 피해지속기간(被害持續期間)에 따라 피해극기지(被害極基地) (5년전(年前)에 피해발생(被害発生))인 공주(公州)(A), 피해지속지(被害持續地)(10년전(年前)에 피해발생(被害発生))인 부여(扶餘)(B), 피해회복지(被害回復地)(20년전(年前)에 피해발생(被害発生))로서 고창지역(高敞地域)(C)을 조사지역(調査地域)으로 설정(設定)하고, 각(各) 조사지역별(調査地域別)로 환경요인(環境要因)과 식생상태(植生狀態)를 調査하여, 환경요인(環境要因)과 식생상태(植生狀態), 삼림군집(森林群集)의 비교(比較), 식물상(植物相)의 변화(変化) 등(等)을 분석(分析)한 결과(結果)를 요약(要約)하면 다음과 같다 1. 임분(林分)이 솔잎혹파리피해(被害)로 부터 회복(回復)되어 감에 따라 식생구성(植生構成)에 변화(変化)가 오고 대상수종(代償樹種)으로 발달(発達)된 참나무류(類)의 상대우점치(相対優点値)가 감소(減小)되었다. 그러나 본(本) 조사지역내(調査地域內)에서는 상수리나무의 상대우점치(相対優点値)가 다른 참나무류(類) 보다 높았다. 2. 솔잎혹파리피해(被害)가 지속(持續)됨에 따라 삼림군집(森林群集)의 종구성상태(種構成狀態)가 점차 다양(多樣)하여진다. 그후 피해(被害)가 회복(回復)됨에 따라 임분(林分)의 종구성상태(種構成狀態)는 단순화(单純化)되는 것으로 나타났다. 3. 상대밀도(相対密度) 및 상대우점치(相対優点値)의 상대치(相対値)에 의(依)한 식생천이(植生遷移)를 종합분석(綜合分析)한 결과(結果) 솔잎혹파리피해(被害)의 극심(極甚)에서 우점종(優点種)을 이루던 참나무류(類)가 피해(被害)로부터 회복(回復)되어감에 따라 그 값이 감소(減少)되고, 싸리류(類), 진달래류(類) 등(等)이 하층식생(下層植生)을 형성(形成)하는 삼림군집(森林群集)으로 변화(変化)하여 갔다. 4. 식생(植生)에 미친 토심(土深), 토양함수량(土壤含水量), 유기물함량(有機物含量), 그리고 유기물층(有機物層)의 두께는 본(本) 조사대상지(調査対象地)의 범위내에 있어서는 거의 같은 것으로 사료(思料)되었고 연평균강수량(年平均降水量)과 온도(温度)도 유사(類似)하였다고 본다.

• 한국산림과학회지
• /
• 제22권1호
• /
• pp.19-48
• /
• 1974

토지국유원칙(土地國有原則)을 표방(標榜)하고 "공사(公私) 공리(共利)"를 기본원칙(基本原則)으로 하고 있었던 고려조(高麗朝)의 시전과제도(柴田科制度)도 집권력(執權力)의 약화(弱化)로 인(因)하여 조만간(早晩間), 붕괴(崩壞)되고 말았던 것이나 임지제도(林地制度)에 있어서는 분묘설정(墳墓設定)의 자유(自由)와 개간장려(開墾奬勵)를 이용(利用)한 삼림(森林)의 광점(廣占) 및 전시과제도(田柴科制度)로 인(因)한 시지(柴地)의 수조권위양(收租權委讓)으로 유래(由來)된 사적수조권(私的洙組權)이 결부(結付)된 삼림(森林)의 사점현상등(私占現象等)이 점차(漸次) 발전(發展)하여 고려중기(高麗中期)의 국정해지기이후(國政解地期以後)에는 대부분(大部分)의 삼림(森林)이 권력층(權力層)의 사점지(私占地)로 화(化)하여 왔었다. 고려조(高麗朝)의 모든 제도(制度)를 그대로 계승(繼承)한 이조(李朝)는 건국후(建國後) 국가소용(國家所用)의 삼림확보(森林確保)를 위(爲)한 삼림수용(森林收用)의 제도확립(制度確立)이 긴요(緊要)하였음으로 전국(全國)의 삼림(森林)을 국가권력(國家權力)에 의(依)하여 공수(公收)하고 국가(國家)와 궁실소용이외(宮室所用以外)의 모든 삼림(森林)은 사점(私占)을 금(禁)한다는 "시장사점금지(柴場私占禁止)"의 제도(制度)를 법제화(法制化)하였고 도성주변(都城周邊)의 사산(四山)을 금산(禁山)으로 함과 아울러 우량(優良)한 임상(林相)의 천연림(天然林)을 택(擇)하여 전조선용재(戰漕船用材)와 궁실용재(宮室用材)의 확보(確保)를 위(爲)한 외방금산(外方禁山)으로 정(定)하고 그 금양(禁養)을 위(爲)하여 산직(山直)을 배치(配置)하였다. 그리고 연병(練兵)과 국왕(國王)의 수렵(狩獵)을 위(爲)한 강무장(講武場)과 관용시장(官用柴場), 능원부속림(陵園附屬林)의 금벌(禁伐), 금화(禁火)를 제정(制定) 등(等) 필요(必要)에 따라 수시(隨時)로 삼림(森林)을 수용(收用)하였으나 고려조이래(高麗朝以來)로 권력층(權力層)에 의(依)하여 사점(私占)되어온 삼림(森林)을 왕권(王權)으로 모두 공수(公收)하지는 못하였던 것이다. 이조초기(李朝初期)에 있어서의 집권층(執權層)은 그 대부분(大部分)이 고려조(高麗朝)에서의 권력층(權力層)이었던것 임으로 그들은 이미 전조시대(前朝時代)로부터 많은 사점림(私占林)을 보유(保有)하고 있었던 것이고 따라서 그들이 권력(權力)을 장악(掌握)하고 있는 한(限) 사점림(私占林)을 공수(公收)한다는 것은 어려운 일이었으며 그들은 오히려 권력(權力)을 이용(利用)하여 사점림(私占林)을 확대(擴大)하고 있었던 것이다. 또 왕자(王子)들도 묘지(墓地)를 빙자(憑藉)하여 주(主)로 도성주변(都城周邊)의 삼림(森林)을 광점(廣占)하고 있던 터에 성종(成宗)의 대(代) 이후(以後)로는 왕자신(王自身)이 금령(禁令)을 어기면서 왕자(王子)에게 삼림(森林)을 사급(賜給)하였음으로 16세기말(世紀末)에는 원도지방(遠道地方)에 까지 왕자(王子)들의 삼림사점(森林私占)이 확대(擴大)되었고 이에 편승(便乘)한 권신(權臣)들의 삼림사점(森林私占)도 전국(全國)으로 파급(波及)하였다. 임진왜란후(壬辰倭亂後)에 시작(始作)된 왕자(王子)에 대(對)한 시장절급(柴場折給)은 삼림(森林)의 상속(相續)과 매매(賣買)를 합법화(合法化)시켰고 이로 인(因)하여 봉건제하(封建制下)에서의 사유림(私有林)을 발생(發生)시키게 된 것이다. 그리하여 권신(權臣)들도 합법적(合法的)으로 삼림(森林)을 사점(私占)하게 되었고 따라서 이조시대(李朝時代) 임지제도(林地制度)의 기본(基本)이었던 시장사점금지(柴場私占禁止)의 제도(制度)는 건국초(建國初)로부터 실행(實行)된 일이 없었으며 오로지 국가(國家)의 삼림수용(森林收用)을 합법화(合法化)시키는 의제(擬制)에 불과(不過)하였던 것이다. 금산(禁山)은 그 이용(利用)과 관리제도(管理制度)의 불비(不備)로 인(因)하여 산하주민(山下住民)들의 염오(厭惡)의 대상(對象)이 되었음으로 주민(住民)들의 고의적(故意的)인 금산(禁山)의 파괴(破壞)는 처음부터 심(甚)하였고 이로 인(因)하여 국가(國家)에서는 용재림확보(用材林確保)를 위(爲)한 금산(禁山)의 증설(增設)을 거듭하였으나 관리제도(管理制度)의 개선(改善)이 수반(隨伴)되지 않았음으로 금산(禁山)의 황폐(荒廢)는 더욱 증대(增大)되었다. 영조(英祖)는 정국(政局)을 안정(安定)시키기 위(爲)하여 경국대전이후(經國大典以後) 남발(濫發)된 교령(敎令)과 법령(法令)을 정비(整備)하여 속대전(續大典)을 편찬(編纂)하고 삼림법령(森林法令)을 정비(整備)하여 도성주변(都城周邊)의 금산(禁山)과 각도(各道) 금산(禁山)의 명칭대신(名稱代身) 서기(西紀) 1699년(年) 이후(以後) 개칭(改稱)하여온 봉산(封山)의 금양(禁養)을 강화(强化)시키는 한편 사양산(私養山)의 권한(權限)을 인정(認定)하는 등(等) 적극적(積極的)인 육림정책(育林政策)을 퍼려하였으나 계속적(繼續的)인 권력층(權力層)의 삼림사점광대(森林私占廣大)는 농민(農民)들로부터 삼림(森林)을 탈취(奪取)하였고 농민(農民)들 이 삼림(森林)을 상실(喪失)함으로써 국가(國家)의 육림장려등(育林奬勵策)은 효과(効果)를 나타내지 못하였던 것이다. 임진왜란후(壬辰倭亂後)의 국정해이(國定解弛)로 인(因)한 묘지광점(墓地廣占), 왕자(王子)에 대(對)한 삼림(森林)의 절급(折給) 권세층(權勢層)에 대(對)한 산림사점(森林私占)은 인허(認許)하는 입안문서(立案文書)의 발행등(發行等)으로 법전상(法典上)의 삼임사점금지조항(森林私占禁止條項)은 사문화(死文化)되었고 이조말기(李朝末期)에 있어서는 사양산(私養山)의 강탈(强奪)도 빈발(頻發)하고 있음을 볼수 있다. 이와 같이 이조시대(李朝時代)의 시장사점금지조항(柴場私占禁止條項)은 오로지 농민(農民)에게만 적용(適用)되는 규정(規定)에 불과(不過)하였고 이로 인(因)하여 농민(農民)들의 육림의욕(育林意慾)은 상실(喪失)되었으며 약탈적(掠奪的)인 삼림(森林)의 채취이용(採取利用)은은 금산(禁山), 봉산(封山) 및 사양산(私養山)을 막론(莫論)하고 황폐(荒廢)시키는 결과(結果)를 자아냈으며 권력층(權力層)의 삼림점탈(森林占奪)에 대항(對抗)한 송계(松契)의 활동(活動)으로 일부(一部) 공산(公山)이 농민(農民)의 입회지(入會地)로서 보존(保存)되어왔다. 그럼에도 불구(不拘)하고 일제(日帝)는 이조말기(李朝末期)의 삼림(森林) 거의 무주공산(無主公山)이 었던것처럼, 이미 사문화(死文化)된 삼림사점금지조항(森林私占禁止條項)을 활용(活用)함으로써, 국가림(國有林)으로 수탈(收奪)한후(後) 식민정책(植民政策)에 이용(利用)하였던 것이나, 실제(實際)에 있어서 이조시대(李朝時代)의 삼림(森林)은 금산(禁山), 봉산(封山), 능원부속림등(陸園附屬林等)의 관금지(官禁地)와 오지름(奧地林)을 제외(除外)하고는 대부분(大部分)의 임지(林地)가 권세층(權勢層)의 사유(私有) 내지(乃至)는 사점하(私占下)에 있었던 것이다.

• 한국유통학회지:유통연구
• /
• 제15권3호
• /
• pp.71-110
• /
• 2010

본 연구에서는 항공권 예약 발권 웹사이트의 서비스 품질을 측정 뿐만 아니라 서비스 회복도 측정하고자 하였다. 또한 서비스 품질과 서비스 회복이 고객만족 및 충성의도에 미치는 영향관계를 실증하고자 하였다. 온라인 서비스 품질과 온라인 서비스 회복의 측정을 위해 Parasuraman, Zeithaml, & Malhotra(2005)가 개발한 E-S-QUAL과 E-RecS-QUAL을 사용했으며, 했다. E-S-QUAL은 온라인 서비스 품질을 측정하는 도구로써, 효율성, 시스템 이용가능성, 이행성, 프라이버시의 4개 차원 22개 항목으로 구성된다. E-RecS-QUAL은 온라인 서비스 회복을 측정하는 도구로써, 반응, 보상, 접촉의 3개 차원 11개 항목으로 구성된다. 실증분석을 위한 설문조사는 항공사나 여행사의 웹사이트를 통해 국내 외 항공권을 구입해 본 경험이 있는 소비자를 대상으로 실시하였는데, 총 400부가 회수되었고, 이 중 342부를 최종분석에 사용하였다. 실증분석을 위해 AMOS 7.0과 SPSS 15.0을 사용하였다. 먼저, SPSS 15.0을 사용하여, 요인점수를 이용한 회귀분석으로 가설검증을 한 결과, <가설 I-1, 2, 3, 4, II-1, 2, 3, III-1, IV-1>이 전부 채택되었다. 온라인 서비스 품질과 온라인 서비스 회복의 각 차원은 모두 전반적인 서비스 품질에 유의한 영향을 보였고, 전반적인 서비스 품질은 고객만족에 유의한 영향을 미쳤다. 마지막으로 고객만족 역시 충성의도에 유의한 영향을 미치는 것으로 확인되었다. 한편 AMOS 7.0을 사용하여 모형 분석을 하였는데, 모형의 적합도는 가설검증을 하기에 합당한 수치가 나왔다. 이를 토대로 가설검증을 한 결과, <가설 I-1, 3, II-1, 3, III-1, IV-1>은 채택되었고, <가설 I-2, 4, II-2>는 기각되었다. 이 결과는 Parasuraman et al.(2005)이 주장한 것처럼 E-S-QUAL을 나타내는 데는 요인점수를 이용한 회귀분석이 더 적합하다는 것을 보여주는 것이라고 판단된다. 이를 토대로 본 연구의 시사점을 정리하였다.