• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.745-750
• /
• 2011

A jig vise is a device to clamp workpiece precisely, which is widely used for various machine tools and manufacturing purpose. A new elastic structured jaw-wedge of jig vise is developed, in this paper, so as to satisfy the clamping requirement and the suppression effect of upright movement of workpiece. The advanced design parameters of jaw-wedge are derived step by step considering the stress distribution and the displacement profiles of ANSYS analysis, and it could find the optimum model which shows the uniform displacement profiles and exhibits the non-concentrated stress distribution of jaw neck. As a result, it is ascertained that an jaw-wedge developed in this study is the simple elastic structure which is effective for automatic multiple clamping purpose without the danger of shear crack or bucking of jaw.

• Journal of Mechanical Science and Technology
• /
• v.14 no.4
• /
• pp.380-392
• /
• 2000

A typical production-distribution system consist of three main echelons representing the retailer, distributors, and a factory each with an on-site warehouse. The system is sufficiently general and realistic to represent many industrial situations. However, decision functions and parameters have been selected to apply particularly to the production and distribution of consumer durables. The flows included in the model are materials, orders, and those information flows needed to support the material and order-rate decisions. In this work, a realistic production-distribution system has been used as a basic model, which consists of three sectors: retailer, distributor, and factory. That system is a nonlinear 25th-order continuous system interconnected between the echelons. Using a modern control algorithm, a typical multi-echelon production-distribution system using a dynamic controller is numerically simulated in the nominal plant and in the perturbed plant when the piecewise constant manufacturing decision is limited by a factory manufacturing upper-limit due to capital equipment, manpower, and factory lotsize.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.830-836
• /
• 2011

Most of pitch/yaw reducers consist of several planetary geartrains. Planetary geartrains make gearboxes to be small and light, low noise and good efficiency. Most important thing in the planetary geartrain is load distribution on the gear tooth flank. In this study, the effect of output shaft bearings on the load distribution of gear tooth flank has been investigated. The commercial software was employed to compare the load distribution of two models depending on the bearing type. The spherical roller bearing(SRB) and the cylindrical roller bearing(CRB) were used as output shaft bearings in the $1^{st}$ model, and two taper roller bearings(TRB) were used in the $2^{nd}$ model. As a result, it was found that the $2^{nd}$ model. showed better performances on the load distribution of gear tooth flank, this results stated that the output shaft bearing system could be important consideration when designing reducers for wind turbine systems.

• Journal of Distribution Science
• /
• v.21 no.10
• /
• pp.77-84
• /
• 2023

Purpose: This study aims to determine the impact of green accounting on the distribution of company financial performance. Green Accounting is seen as an accounting approach that considers the environmental impact of business activities and the distribution of financial performance which is expected to provide great benefits to the company. Research Design Data and Methodology: The population of this study is 168 manufacturing companies listed on the Indonesia Stock Exchange from 2018 to 2020. The research theory uses the Legitimacy Theory and the Shareholder Theory. Research data were analyzed using multiple regression models with purposive sampling. Green Accounting in this study uses environmental cost proxies using Return on Capital Employed (ROCE). Financial performance uses the Return on Equity (ROE) proxy. Results: research shows that the influence of green accounting can provide important input to operational managers in manufacturing companies in making decisions regarding environmental costs and environmental protection that will provide economic benefits for the company. In addition, these findings also clarify the great benefits of green accounting policies for a company's production process. Conclusion: Green Accounting has a long-term impact through the company's financial performance. Green Accounting can be the basis for companies in deciding whether to invest or not.

• Journal of the Korean Regional Science Association
• /
• v.9 no.1
• /
• pp.3-23
• /
• 1993

In this paper the prevailing geography of the information sector, fousing on its occupatonal dimension, is examined. The purposes of this paper are to analyze the labor force share of information occupation workers at each special city and region, to compare the inter-regional distribution of information workforce and to analyze regional share of information occupations in manufacturing industry. Spatial pattern of size and occupational composition of information sector shows a core-periphery disparity. There is a clear evidence of Seoul's dominance of the information economy, particularly such as scientific and technical, consultative services, management and process control function. Also the distribution of information workers in manufacturing industry over space was polarized than is the case for total manufacturing employment and noninformation workers. Therefore Korean information economy is marked by a highly articulated spatial division of labor within individual industry, which can be attributed to the locational characteristics of information intensive industries and industrial composition of regional economy. From the results of this study, information employment prospects among regions of Korea would reinforce the unequal geography of job opportunity. In this light, regional policy efforts should be given to the improvement of information infrastructure to facilitate new computer-based service products and process in peripheral regions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.541-546
• /
• 2011

This study was numerically investigated on thermal deformation of AC4C and AC7A aluminum alloy casting material for manufacturing the automobile tire mold. The metal casting device was used in order to manufacture the mold product of automobile tire at the actual industrial field. The temperature distribution and the cooling time of these materials were numerically calculated by finite element analysis. Thermal deformation with stress distribution was also calculated form the temperature distribution results. The thermal deformation was closely related to the temperature difference between the surface and inside of the casting. As shown by numerical analysis result, the thermal deformation of AC7A casting material became higher than AC4C casting material. In addition, the results of displacement and stress distributions appeared to be larger at the center parts of casting than on its sides because of the shrinkage caused by the cooling speed difference.

• Journal of Distribution Science
• /
• v.20 no.12
• /
• pp.43-57
• /
• 2022

Purpose: This study discusses the phenomenon of the uncertain sustainability of SMEs in developing countries. SMEs face various challenges in the dynamics of a competitive environment, which threaten their growth and sustainability. This study aims to address a research gap between company's internal resources, in the form of absorptive capacity, and its business performance. By using product quality as a mediator, which has never been studied before, this research presents a novelty to answer the existing research gap using the Resource Based Theory (RBT) perspective. Research design, data and methodology: Using quantitative method, data are collected from 164 respondents, who are owners or managers of furniture manufacturing SMEs in Gerbangkertosusila Area, East Java, Indonesia. The data are analyzed using Partial Least Square (PLS) - Structural Equation Modeling (SEM). Results: The findings show that absorptive capacity has a direct and significant effect on business performance and indirectly through product quality. Conclusion: Furniture manufacturing SMEs are advised to focus on developing absorptive capacity reflected in good product quality, in order to improve their business performance. This is especially important to survive the crisis caused by the Covid-19 pandemic. Thus, the results of this study contribute to the development of RBT, and there are several suggestions for further research.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1804-1807
• /
• 2001

By comparing and analyzing the feature, brightness, chromaticity and uniformity of domestic LGPs and Japanese products, early home-manufacturing and stabilization in home-manufacturing are possible. By comparing and analyzing the distribution of brightness as sheets are varied, we can design an ideal sheet composition.

• International Journal of Korean Welding Society
• /
• v.4 no.1
• /
• pp.23-29
• /
• 2004

In weaving welding where a V groove exists, the heat input distribution is an important factor that determines the defectiveness of the bead shape, undercut and over-lap. In this study, the amount of heat input, which is determined by the welding current, voltage, speed and weaving conditions is calculated through mathematical development and numerical methods. Furthermore, the heat input distribution as a two- dimensional heat source was observed when applied to each groove.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.387-394
• /
• 2004

Zero-Inflated Poisson distribution is Poisson distribution with excess zeros. Recently defects of product hardley happen in the manufacturing process. In this case it is desirable to apply to the Zero-Inflated Poisson distribution rather than Poisson. Our target of this paper is to study the tests for changes of rate of defects after the unknown change-point. We are going to compare the powers of the two proposed tests with likelihood tests by the simulations.