• 제목/요약/키워드: Distributing board

검색결과 30건 처리시간 0.023초

사물인터넷 기반 수배전반 상태 모니터링 시스템 (Distributing Board Monitoring System based on Internet of Things)

  • 이영동
    • 한국정보통신학회논문지
    • /
    • 제20권1호
    • /
    • pp.200-206
    • /
    • 2016
  • 수배전반 전기사고 사전 예방을 위해 전기 관리자가 시간과 장소에 구애받지 않고 전력설비의 상태를 실시간으로 감시할 수 있는 시스템 개발이 필요하다. 본 논문에서는 사물인터넷 기반 수배전반 상태 모니터링 시스템을 제안한다. 제안된 시스템은 기존 수배전반 및 제어반 등에 설치하여 수배전반 및 제어반의 상태정보와 제어정보를 인터넷망과 연결된 클라우드 서버와 근거리 무선통신망으로 실시간 전송된다. 관리자는 관리자 단말기를 통해 언제, 어디서나 상태정보 모니터링을 신속하고 용이하게 관리할 수 있으며, 수배전반 상태정보의 성능평가 결과 판정기준 ${\pm}5%$ 이내 오차범위 내의 측정결과를 얻었다.

제진형 배전반의 진동 및 환경 데이터수집을 위한 IoT 시스템 구현 (Implementation of IoT System for Wireless Acquisition of Vibration and Environmental Data in Distributing Board)

  • 이병영;이영동
    • 융합신호처리학회논문지
    • /
    • 제22권4호
    • /
    • pp.199-205
    • /
    • 2021
  • 수배전반의 경우 지면 또는 건물의 바닥 면에 바로 설치되며 지진과 같은 진동이나 외부 충격 발생 시 수배전반의 내부 전력기기, 배선 그리고 보호계전기 등의 전기부품 손상, 오동작 발생 가능성이 커지게 된다. 이러한 이유로 최근 내진형 수배전반의 필요성이 대두되고 있으며, 제진기능을 갖는 수배전반의 연구 개발 및 제품 출시가 이루어지고 있다. 본 논문에서는 제진형 배전반의 진동, 온도, 습도 등을 측정할 수 있는 제진형 배전반의 진동 및 환경 데이터수집을 위한 IoT 시스템을 구현하였다. 제진형 배전반에 진동이 발생하였을 때 진동 정도 및 온습도 데이터를 측정하고 신뢰성 있는 메시징 전송을 위한 MQTT 프로토콜을 사용하였고, 모니터링과 데이터 저장은 Node-RED를 통해 MySQL DB에 데이터를 저장하고, 시각화를 진행하였다. 제진형 배전반에 IoT 기기를 부착하여 테스트를 진행 하였으며, 데이터를 실시간으로 수집하고 Node-RED의 대시보드 UI에서 진동 및 환경 데이터의 변화를 모니터링 하였다.

주배선반용 로봇 스위치 보드 시스템의 개발 (A Development of a Robotic Switch Board System for Main Distributing Frames)

  • 성영휘;정해;이수영;안희욱
    • 로봇학회논문지
    • /
    • 제4권2호
    • /
    • pp.155-162
    • /
    • 2009
  • A main distributing frame(MDF) is an interface unit that is used to connect office equipment cables in a telephone company to subscriber cables. Until now, there is no automated switching system for MDFs in Korea. Manual handling of an MDF has some drawbacks; It is time-consuming, very cumbersome, and expensive. It also makes maintenance hard. An automated main distributing frame system is proposed and commercialized in Japan. In that system, a robot gripper inserts connecting pins into the cross point holes of a matrix board, which reveals several disadvantages in the aspects of space, maintenance, fault tolerance, and economical efficiency. This paper describes a newly developed robotic switch board system for MDFs. In the developed system, switches are placed at the cross point of a matrix board. There is one robot in between two switch units, so one robot deals with two switch units. In the system, positioning the robot, opening and closing switches can be done by using only a pair of motors and a pair of solenoids. The newly developed system is compact in size, reduces cost, and shows high reliability.

  • PDF

재래시장 전기설비 실태조사 분석 (Analysis of Electrical Installation Survey at Conventional Markets)

  • 이상익;전현재;김기현;배석명
    • 전기학회논문지P
    • /
    • 제57권2호
    • /
    • pp.186-191
    • /
    • 2008
  • The conventional markets is badly damaged by a big fire because of no proper fire fighting management system. The cause of electricity fire is the aging and contact badness of electric equipment. The supervisory detecting system is needed to develop because the electric equipment is located to non visible and non exposing place. In this paper, we investigated the receiving and distributing board, the panel board and the fire prevention system of 17 domestic conventional markets. As a result of survey, capacity of distributing boards is mainly 600A and materials of distributing boards are synthetic resins 49%, metal 44%. ELB is mainly used as branch circuit breaker.

응답스펙트럼해석법을 이용한 배전반의 내진건전성 해석 (Seismic Integrity Analysis of an Electric Distributing Board Using the Response Spectra Analysis Method)

  • 최영휴;김수태;설상석;문성춘
    • 한국기계가공학회지
    • /
    • 제19권4호
    • /
    • pp.45-51
    • /
    • 2020
  • In this study, a response spectrum analysis of an electric distributing board (EDB) was conducted to investigate seismic integrity in the design stage. For the seismic analysis, the required response spectra of a safe shutdown earthquake with 2% damping (RRS/SSE-2%) specified in GR-63-CORE Zone 4 was used as the ground spectral acceleration input. A finite element method modal analysis of the EDB was also performed to examine the occurrence of resonance within the frequency range of the earthquake response spectrum. Furthermore, static stress caused by deadweight was analyzed. The resultant total maximum stress of the EDB structure was calculated by adding the maximum stresses from both seismic and static loads using the square root of the sum of the squares (SRSS) method. Finally, the structural safety of the EDB was investigated by comparing the resultant total maximum stress with the allowable stress.

이슬 결로점 기반 수배전반 결로 방지 장치 제작 (System Implementation for Dew Condensation Prevention of Distributing Boards based on the Dew Point)

  • 김태명;지석근;김영완
    • 전기전자학회논문지
    • /
    • 제22권3호
    • /
    • pp.645-650
    • /
    • 2018
  • 본 논문에서는 옥내 외에 설치 운영되는 수배전반의 결로 현상을 방지하는 IT 기반 자동 온습도 제어기를 설계하고 제작하였다. 이슬 결로점 온도가 실내공간의 습도와 온도로부터 산출되고, 이슬 결로점 온도와 결로 부위의 온도를 비교하여 수배전반의 결로 현상을 방지할 수 있는 시설이 순차적으로 제어 동작되도록 구현하였다. 아울러 원격지의 수배전반의 결로 기반 제어기 동작 상태를 모니터링 할 수 있는 원격 모니터링 장치를 LoRa 무선통신 방식을 사용하여 구현하였다. 제어기와 원격 모니터링 장치를 설치 운영하여 전송되는 데이터의 정확성과 결로 기반 제어기 동작상태의 안정성을 확인하였다. 본 제어 장치는 수배전반 이외에 결로가 발생되는 장비에 설치되어 결로를 방지할 수 있는 장치로 용이하게 활용될 수 있다.

신경회로망을 이용한 큐비클 수배전반의 경보 처리 시스템 개발 연구 - 공동주택 전력설비 중심 - (A study on he Alarm Processing System for Cubicle-type Receiving and Distributing Board using Neural network)

  • 문학룡;류승기;최도혁;홍규장;정찬수
    • 조명전기설비학회논문지
    • /
    • 제12권3호
    • /
    • pp.124-131
    • /
    • 1998
  • 본 논문에서는 건축물의 수배전설비에서 발생하는 경보를 신경 회로망과 고장 진단 지식베이스를 적용하여 감시의 효율을 향상시킬 수 있는 방안을 제시하였다. 제안된 경보 처리시스템은 역전파 알고리즘의 누가 역전파 알고리즘을 이용하여 다중 경보 발생에서 최소 경보요소를 추출하는데 사용하고 추출된 경보는 사전에 정의된 고장진단 지식베이스를 이용하여 셜비 유지보수 정보를 화면에 전개하도록 구성하였다. 제안된 감시기법의 유용 성을 확인하기 위하여 5가지의 가상 시나리오를 통해서 신경 회로망의 적용 가능성을 확인할 수 있었으며, 비전문가라도 설비의 유지관리 업무가 가능하도록 개발되었다.

  • PDF

변압기용 절연유의 특성에 관한 실험적 연구 (A study on an experimental basis a special character of insulating oil the use of a transformers)

  • 김성대;박일수
    • 한국산학기술학회논문지
    • /
    • 제12권11호
    • /
    • pp.5188-5193
    • /
    • 2011
  • 본 연구는 변압기 내부에 있는 절연유의 온도제어를 목적으로 열전소자인 펠티어 소자와 무전력 냉각장치인 Heat pipe를 이용한 다양한 시스템을 설계 제작하여, 절연유의 용량별 온도제어에 적용함으로써 최적의 시스템을 구현할 수 있었다. 실험을 통하여 $60^{\circ}C$ 이내의 상태에서는 Heat pipe 100 W + 펠티어 100 W의 조합형이 순수 Heat pipe 300 W보다 탁월한 성능을 확인할 수 있었다. 이를 통하여 조합형의 적정설계 방식이 우수하다는 것을 증명하고, 조합형을 사용함으로써 전기절약 효과와 수배전반의 보다 더 효율적인 관리에 기여하고자 한다.

이미지 보오드를 이용한 PIV시스템의 개발 (Development of PIV System by Image Board)

  • 조대환;최장운;도덕희;이영호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제20권5호
    • /
    • pp.30-38
    • /
    • 1996
  • A PIV system consisting of an image board slit into personal computer and 2-D sheet light projector is developed and related techniques to improve its performance are discussed. A grey-level cross correlation method capable of overcoming particle seeding limitation is suggested. And a sub-pixed interpolation method in determining the vector terminal is preposed by considering 8-neighbours correlation distributing patterns. Furthermore, pressure estimation from the acquired velocity vectors by applying the Poisson equation is persented with reasonable feasibility. As a practical application of the present system, evaporator flows are analysed and attained instantaneous velocity vectors reveal that the flow phenomena maintain turbulent fluctuation.

  • PDF

수.배전반용 자동소화 SYSTEM (Auto Fire Extinguishing System for Distributing Board)

  • 이창우
    • 한국화재조사학회지
    • /
    • 제6권1호
    • /
    • pp.67-71
    • /
    • 2005
  • 화재 발생에 따른 화재조사 시 배전반이나 분전반의 완전 소락에 따른 전기화재 원인규명의 기본적이고도 중요한 증거 소멸로 원인불명 율이 점차 높아가고 있는 실정이다. 공장이나 창고에서 전기화재를 가장한 수 배전반 화재를 시도할 경우 그 증거를 찾기 어렵다. 또한, 수 배전반이 위치한 곳에 사람이 상주하지 않는 곳이 많으며 초기 소화가 원활히 이루어지지 않을 경우 막대한 재산 피해와 통신의 대혼란을 가져올 소지가 다분히 존재하고 있다. 따라서, 수 배전반 및 분전반의 화재로부터 보호하기 위해서는 신뢰성과 안전성이 확보된 자동소화 시스템의 도입이 필요하다.

  • PDF