• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9C
• /
• pp.564-572
• /
• 2011

Distributed video coding (DVC) system has been proposed to reduce encoder complexity by using the correlation of frames in decoders. Since the block based motion estimation operation is not performed in the encoder of DVC system, lapped transforms, in which adjacent two blocks are transformed into one block, can be efficiently used in the DVC system. In this paper, an efficient DVC system using lapped transforms is proposed. The overlapped block motion compensated interpolation is used to produce side information, and the corresponding correlation noise between original Wyner-Ziv frame and side information is modeled. Extensive computer simulations show that the proposed DVC system outperforms conventional DVC systems.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.422-423
• /
• 2010

최근 Encoding과정에 비용이 많이 들어가는 MPEG계열의 압축 기술과 다르게 Encoding과 Decoding에 적절히 비용을 분산시키는 Distributed Video Coding(DVC)에 대한 연구가 활발히 진행되고 있다. 이는 휴대용 멀티미디어 기기들의 발전으로 영상 압축에 대한 비용을 분산시킬 필요가 발생했기 때문이다. 이때 Decoding과정에서 생성되는 side information의 정확성은 Winer-Ziv 프레임 복원에 대한 parity비트에 영향을 줘 압축 성능에 큰 영향을 준다. 이에 본 논문은 DVC에 사용할 수 있는 보다 정확한 Frame Interpolation방법을 제안한다. 단일 방향 예측을 통해 움직임 벡터를 생성하고 비어있는 공간에 대해 분산을 이용, Dominant MV와 픽셀평균값을 이용하여 프레임을 생성한다. 이는 기존 frame interpolation방법에 비해 비용이 적게 들고, 화질은 그대로 유지할수 있는 장점이 있다. 이를 확인하기 위해 DVC기법에 사용되는 frame interpolation에 제안하는 알고리즘을 적용하여 실험을 진행하였으며 다른 알고리즘들과 비교해 화질은 유지하고 계산량은 줄일수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1043-1053
• /
• 2012

In distributed video coding (DVC) systems, the complexity of encoders is greatly reduced by removing the motion estimation operations in encoders, since the correlation between frames is utilized in decoders. The transmission of parity bits is requested through the feedback channel, until the related errors are corrected to decode the Wyner-Ziv frames. The requirement to use the feedback channel limits the application of DVC systems. In this paper, we propose an efficient method to remove the feedback channel in DVC systems. First, a simple side information generation method is proposed to calculate the amount of parity bits in the encoder, and it is shown that the proposed method yields good performance with low complexity. Then, by calibrating the theoretical entropy with three parameters, we can calculate the amount of parity bits in the encoder and remove the feedback channel. Moreover, an adaptive method to determine quantization parameters for key frames is proposed. Extensive computer simulations show that the proposed method yields better performance than conventional methods.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.585-595
• /
• 2007

Distributed video coding is a new video coding paradigm based on Slepian-Wolf and Wyner-Ziv's information theory Distributed video coding whose decoder exploits side information transfers its computational burden from encoder to decoder, so that encoding with light computational power can be realized. RD performance is superior than that of standard video coding without motion compensation process but still has a gap with that of coding with motion compensation process. This parer introduces basic theory of distributed video coding and its structure and then shows RD performances of DVCs whose coding style is different from each other and of a DVC as a spatial scalable video coder.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.122-128
• /
• 2012

Because of the system delay caused by the number of feedback retransmission in Distributed Video Coding (DVC) scheme, it is difficult to realize practical DVC in many cases. In this paper low feedback retransmission Distributed Source Coding (DSC) scheme is proposed for practical DVC scheme based on Low-Density Parity-Check (LDPC) codes because DVC system is an specific application of DSC system. This DSC scheme is achieved by using different LDPC codes optimized in each different compression rate and using source revealing scheme. Optimized LDPC codes provide us much better decoding performance which causes the 57% reduced number of iteration. Consequently, the number of feedback retransmission is decreased by 50%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.34-42
• /
• 2012

Low density parity check (LDPC) code is widely used, since it shows superior performance close to Shannon limit and its decoding complexity is lower than turbo code. Recently, it is used as a channel code to decode Wyner-Ziv frames in distributed video coding (DVC) system. In this paper, we propose an efficient method to design the parity check matrix H of LDPC codes. In order to apply LDPC code to DVC system, the LDPC code should have rate compatibility. Thus, we also propose a method to merge check nodes of LDPC code to attain the rate compatibility. LDPC code is designed using ACE algorithm and check nodes are merged for a given code rate to maximize the error correction capability. The performance of the designed LDPC code is analyzed extensively by computer simulations.

• Journal of Broadcast Engineering
• /
• v.15 no.5
• /
• pp.642-652
• /
• 2010

Recently, DVC (Distributed Video Coding) techniques are drawing a lot of interests as one of the future research works to achieve low complexity encoding in various applications. But, due to the limited computational complexity, the performances of DVC algorithms are inferior to those of conventional international standard video coders, which use zig-zag scan, run length code, entropy code and skipped macroblock. In this paper, in order to overcome the performance limit of the DVC system, the distortion for every block is estimated when side information is found at the decoder and then we propose a new selective block encoding scheme which provides the encoder side with the motion information for the highly distorted blocks and then allows the sender to encode the motion compensated frame difference signal. Through computer simulations, it is shown that the coding efficiency of the proposed scheme reaches almost that of the conventional inter-frame coding scheme.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.123-132
• /
• 2011

Recently, DVC (Distributed Video Coding) is receiving a lot of attention as one of the low complexity video encoding techniques suitable for various applications with computation-limited and/or power-limited environment, and is being actively studied for improving the coding efficiency. This paper proposes a rate-distortion based selective block encoding scheme. First, the motion information is obtained in the process of generating side information at decoder and received through the feedback channel, and then, based on this information, the proposed method performs a selective block encoding based on rate-distortion optimization. Experimental results show that the performance of the proposed scheme reaches up to 2.2 dB PSNR gain over the existing scheme. Moreover, it is shown that the complexity can be reduced by encoding parts of region considering rate-distortion cost.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.35-42
• /
• 2010

Side information generation techniques play a great role in determining the overall performance of the DVC (Distributed Video Coding) coding system. Most conventional techniques for side information generation are mainly based on the block matching algorithm with symmetric motion estimation between the previously reconstructed key frames. But, these techniques tend to show mismatches between the motion vectors and the real placements of moving objects. So these techniques need to be modified so as to search well the real placements of moving objects. To overcome this problem, this paper proposes a block-centered symmetric motion estimation technique which uses the same coordinates with the given block. Through computer simulations, it is shown that the proposed algorithm outperforms the conventional schemes in the objective quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.11
• /
• pp.952-960
• /
• 2012

In the distributed video coding (DVC) system, the difference between the side information and the original Wyner-Ziv frame is corrected using channel codes and the additional parity bits are requested through feedback channel if the error is not corrected. The efficient bit rate control is important to use the DVC system in the band-limited channel, such as mobile communication environments. In this paper, the constant bit rate control method in the encoder of the DVC system is proposed. The coding performance as well as the bit rate is efficiently controlled by the proposed method.