• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.225-232
• /
• 2008

When a single source of multimedia contents is distributed to multiple reproduction devices, the audio and video contents require synchronous play for multi-channel stereo sound and lip-synchronization. The multimedia system in vehicle, especially, has researched to move to wireless environments from legacy wired environments. This paper proposes the advanced algorithm for providing synchronized services of real-time multimedia traffic in IEEE 802.11 WLANs [1]. For these, we implement the advanced IEEE 1588 Precision Time Protocol [2] and the environments for simulation. Also, we estimate and analysis performance of the algorithm, then we experiment and analysis after the porting of algorithm in wireless LAN devices (Linksys wrt-350n AP network device) to characterize timing synchronization accuracy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1355-1363
• /
• 2017

Recently, distributed compressed video sensing (DCVS) has been actively studied in order to achieve a low complexity video encoder by integrating both compressed sensing and distributed video coding characteristics. Conventionally, a motion compensated block compressed sensing with smoothed projected Landweber (MC-BCS-SPL) has been considered as an effective scheme of DCVS with all compressed sensing frames pursuing the simplest sampling. In this scheme, video frames are separately classified into key frames and WZ frames. However, when reconstructing WZ frame with conventional MC-BCS-SPL scheme at the decoder side, the visual qualities are poor for temporally active video sequences. In this paper, to overcome the drawbacks of the conventional scheme, an enhanced MC-BCS-SPL algorithm is proposed, which corrects the initial image with reference to the key frame using a high correlation between adjacent key frames. The proposed scheme is analyzed with respect to GOP (Group of Pictures) structuring method. Experimental results show that the proposed method performs better than conventional MC-BCS-SPL in rate-distortion.

• Journal of Korea Multimedia Society
• /
• v.13 no.7
• /
• pp.1016-1022
• /
• 2010

Far-talking recognition and distributed speech recognition networking techniques are essential to control various and complex home services conveniently with voices. It is possible to control devices everywhere at home by using only voices. In this paper, we have developed the server-client DSP module for distributed speech recognition network system and proposed a new decision rule to decide intelligently whether to accept the recognition results or not by the transferred confidence rate. Simulation results show that the proposed decision rule delivers better performances than the conventional decision by majority rule or decision by first-arrival. Also, we have proposed the new interrupt-polling technique to remedy the defect of existing delay technique which always has to wait several clients' results for a few seconds. The proposed technique queries all client's status after first-arrival and decides whether to wait or not. It can remove unnecessary delay-time without any performance degradation.

• Journal of Internet Computing and Services
• /
• v.21 no.5
• /
• pp.39-48
• /
• 2020

Recently, the study and development of environment-friendly energy technique have increased in worldwide due to environmental pollution and energy resources problems. In vehicle industry, the development of electric vehicle(EV) is now on progress, and also, many other governments support the study and development and make an effort for EV to become widely available. In addition, though they strive to construct the EV infra such as a charge station for EV, the techniques related to managing charge demand and peak power are not enough. The standard of EV communication has been already established as ISO/IEC 15118, however, most of implemented EVs and EV charge stations do not support any communication between each of them. In this paper, an improved slow charge scheme for non-communication EVs is proposed and designed by using predicting charge demand. The proposed scheme consists of distributed charge model and charge demand prediction. The distributed charge model is designed to manage to distribute charge power depending on available charge power and charge demand. The charge demand prediction is designed to be used in the distributed charge model. The proposed scheme is based on the collected data which were from EV slow charge station in business building during the past 1 year. The system-level simulation results show that the waiting time of EV and the charge fee of the proposed scheme are better than those of the conventional scheme.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1474-1479
• /
• 2015

With mobile devices showing marked improvement in performance in the age of the Internet of Things (IoT), there is demand for rapid processing of the extensive amount of multimedia big data. However, because research on image searching is focused mainly on increasing accuracy despite environmental changes, the development of fast processing of high-resolution multimedia data queries is slow and inefficient. Hence, we suggest a new distributed image search algorithm that ensures both high accuracy and rapid response by using feature extraction of distributed images based on MapReduce, and solves the problem of memory scalability based on BIRCH indexing. In addition, we conducted an experiment on the accuracy, processing time, and scalability of this algorithm to confirm its excellent performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.145-158
• /
• 1997

Method for synchronizing multimedia data is needed to support continuous transmission of multimedia data through a network in a bounded time and it also required for supporting continuous presentation of multimedia data with the required norminal playout rate in distributed network environments. This paper describes a new synchronization method for supporting delay-sensitive multimedia Presentation without degration of Quality of services of multimedia application. It mainly aims to support both intermedia and intermedia synchronization by absorbing network variations which may cause skew or jitter. In order to remove asynchonization problems, we make use of logical time system, dynamic buffer control method, and adjusting synchronization intervals based on the quality of services of a multimedia. It might be more suitable for working on distribute[1 multimedia systems where the network delay variation is changed from time to time and no global clock is supported. And it also can effectively reduce the amount of buffer requirements needed for transfering multimedia data between source and destination system by adjusting synchronization intervals with acceptable packet delay limits and packet loss rates.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.60-68
• /
• 2012

In recent years, the requirements on the high quality environment monitoring by using the sensor nodes which can handle the multimedia data in WSN have been increased. However, because the volume of multimedia data is tremendous, the limited bandwidth of a wireless channel may incur the bottleneck of a system. To solve such a problem, most of the existing distributed multi-path routing protocols based on multimedia data just focused on overcoming the limited bandwidth in order to enhance the energy efficiency and the transmission rate. However, because the existing methods can not apply a key-based technique to encrypt the multimedia data, they are very weak for the security. In this paper, we propose a secure disjointed multipath routing scheme for multimedia data transmission. Since our proposed scheme divides multimedia data(eg. image) into pixels and sends them through disjointed multipath routing, it can provide security to the whole network without using the key-based method. Our experimental results show that our proposed scheme reduces about 10% the amount of the energy consumption and about 65% the amount of the missed data packets caused by malicious nodes over the existing methods on average.

• Journal of Korea Multimedia Society
• /
• v.14 no.12
• /
• pp.1583-1590
• /
• 2011

A Certificate Revocation List(CRL) should be distributed quickly to all the vehicles for vehicular communications to protect them from malicious users and malfunctioning equipment as well as to increase the overall security and safety of vehicular networks. Thus, a major challenge in vehicular networks is how to efficiently distribute CRLs. This paper proposes a Multimedia Object Transfer(MOT) protocol based on CRL distribution scheme over T-DMB infrastructure. To complete the proposed scheme, a handoff method, CRL encoding rules based on the MOT protocol, and relative comparison are presented. The scheme can broaden breadth of network coverage and can get real-time delivery with enhanced transmission reliability. Even if road side units are sparsely deployed or, even not deployed, vehicles can obtain recent CRLs from T-DMB infrastructure effectively.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.281-287
• /
• 2000

A mobile ad-hoc network is composed of only mobile nodes, which are distributed dynamically, without any wired backbone or centralized entities. Since the existing works on ad-hoc routing protocol are mostly biased toward a military application, we need a new routing scheme for a support of multimedia services in mobile ad-hoc networks. Therefore, we propose a novel scheme that can support a variety of traffic attributes and can be applicable to high-speed and multimedia data services in mobile ad-hoc networks by using adaptive transmission power level. As a result of simulation, the proposed scheme has better performance than conventional method, which is performed with uniform transmission power level, in view of route query delay time.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.2
• /
• pp.113-122
• /
• 2007

Recently, there are many research interests in providing efficient, temporal and spatial distribution multimedia streaming service. This paper proposed a temporal and spatial object grouping method for distribution multimedia streaming service. The proposed method performs the grouping structure by filtering and mapping with the collected frame object in application domains and it's peformed by JM relationship with the mapped frame objects. The results show that the performance provides the better than the other methods.