• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1324-1327
• /
• 1996

This paper presents an open architecture controller (OAC) for machining systems and describes the OAC testbed at Seoul National University. Because our OAC is designed for fully open systems, it does not depend on any specific hardware or software components. This openness includes software reusability which enables integration of a wide range of monitoring and control features. In addition to openness, our OAC system provides guaranteed real-time performance, an important requirement for advanced manufacturing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.121.6-121
• /
• 2002

Web-based virtual machine/manufacturing system (VMS) utilizes Virtual Device Network (VDN.) VDN inevitably involves the implementation of Distributed Monitoring and Control Networks (DMCN). In general, one needs to integrate device (control) network and IP network to realize DMCN over IP network or internet, which can be viewed as a VDN. In this study, LonWorks networking technology is used for device network and the transmission characteristics of LonWorks/IP-based VDN is investigated. A method to minimize the transmission delay in the LonWorks/IP networks is also suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.463-467
• /
• 1992

This paper describes the automatic generation of sequence control programs for DCS(Distributed Control System), PLC(Programable Logic Controller) and so on. Since there is no same manufacturing process, it is difficult to standardize sequence programs. We propose the automatic sequence control program generator which is CAD software using knowledge engineering technique.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.183-189
• /
• 1999

Nowadays advanced manufacturing companies are trying to find a way to check the performance of their production equipments and plants from remote sites. However, it is hard to monitor the status of machine or to check the performance of the processes because the regional limitation of distributed environment. This paper presents research results in the real time monitoring of machining processes and internet_based operation of machining centers via internet, which is implemented using VRML and JAVA.

• 한국정보처리학회논문지
• /
• 제7권12호
• /
• pp.3910-3922
• /
• 2000

현재의 전력시스템은 컴퓨터와 통신기술의 발전으로 분산시스템인 EMS(Energy Menagement System)/SCADA(Super-vision Control and Data Acquisition) 형태로 운영되어 전력의 생산, 전송 그리고 분배가 효과적으로 이루어지고 있다. 그러나 각 시스템은 언어, 운영체제 그리고, 통신프로토콜이 서로 다른 제품으로 구성되어 시스템간에 데이터를 교환하는데 많은 어려움이 따르고 있다. 이러한 문제를 해결하기 위해서는 미국 전력연구소는 전력제어센터간의 통신을 담당하는 ICCP(Inter-Control Center Protocol)라는 새로운 형태의 통신규약을 발표하였다. ICCP는 자동화용 표준 통신규약인 MMS(Manufacturing Message Specification)를 응용계층의 하부 규약으로 지정함으로써 서로 다른 기종의 제어센터간의 원활한 통신을 지원한다. 본 논문은 ICCP의 특징과 MMS와 ICCP가 어떻게 상호 연관되는가를 밝힌다. ICCP에서 이용하는 MMS 라이브러리(library)의 86개의 서비스 중 일부 서비스를 구현한 후 이것을 이용하여 TCP/IP 환경 하에서 ICCP의 기본이면서 핵심적인 기능을 구현한다. 그 다음, ICCP 프로토콜을 이용하여 EMS간의 통신을 모델링하고, 전력센터간의 실제 데이터 교환을 윈도우 환경 하에서 구현하여 ICCP 프로토콜의 동작과 기능을 보여준다.

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.65-72
• /
• 2019

In long freight trains, there is a brake time delay in neighboring freight cars, which causes damage and fractures in the couplers, especially at their knuckle. A problem in the couplers of the cars can cause derailment and damages of human life and property. In this study, maximum forces on the couplers are studied when a long freight car brakes with the brake delay time and coupler gap. We make a dynamic model of 50 freight cars and couplers, applying contact between the couplers and a characteristic curve to express the force and displacement of the buffers using SIMPACK, which is a multi-body dynamics program. We use EN 14531-2, which is a standard of freight car brakes, to verify the dynamic model. Then, we compare the analyzed impact force with the coupler knuckle standard after applying the two carriages of a locomotive in the model based on the dispersed double head control system. The result shows that all coupler gap conditions satisfy the infinite lifetime of the material when the brake delay time is 0.1 second.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.226-231
• /
• 2011

Graphene was coated on STS 316L by electro spray coating method to improve its properties of corrosion resistance and contact resistance. Exfoliated graphite (graphene) was made of the graphite by chemical treatment. Graphene is distributed using dispersing agent, and STS 316L was coated with diffuse graphene solution by electro spray coating method. The structure of the exfoliated graphite was analyzed using XRD and the coating layer of surface was analyzed by using SEM. Analysis showed that multi-layered graphite structure was destroyed and it was transformed into fine layers graphene structure. And the result of SEM analysis on the surface and the cross section, graphene layer was uniformly formed with 3~5 ${\mu}m$ thickness on the surface of substrate. Corrosion resistance test was applied in the corrosive solution which is similar to the PEM fuel cell stack inside. And interfacial contact resistance test was measured to simulate the internal operating conditions of PEM fuel cell stack. The results of measurements show that stainless steel coated with graphene was improved in corrosion resistance and surface contact resistance than stainless steel without graphene coating layer.

• 패션비즈니스
• /
• 제16권2호
• /
• pp.12-26
• /
• 2012

Fashion industry characteristically goes through many steps to manufacture and to retail apparel products. Complex inter-industry channels with many intermediaries in fashion industry provoked many problems regarding recognizing customer's need, delivering time, flexibility, and inventory control. Therefore, the purposes of this study were to investigate the differences between apparel manufacturing and distribution process in SCM success factors and performances, and to investigate how SCM success factors affect on performances. Questionnaire was developed and distributed to apparel industry. The returned 116 questionnaires were analyzed by Cronbach's alpha for internal validity, factor analysis, t-test, and regression analysis with SPSS14.0. The results of this study were as follows: There was significant difference of SCM success factors between apparel manufacturing and distribution regarding process standardization and integration. There were significant differences of SCM performances such as reaction for customer, flexible management, cost minimization, and maximized asset utilization which distribution was higher than apparel manufacturing process. In apparel manufacturing, SC strategic relation, and integrative management influenced upon reaction for customer of SCM performances. SC integrative management influenced upon cost minimization. SC integrative management influenced upon maximized asset utilization. In distribution, SC strategic relation, and activated support for SCM influenced upon reaction for customer of SCM performances. SCM specialization, credible relationship among supply chains, activated support for SCM, and SC integrative management influenced upon cost minimization. SCM specialization, credible relationship among supply chains, and SC integrative management influenced upon maximized asset utilization.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1252-1257
• /
• 2013

본 연구는 Homomixer의 회전속도에 따른 염화마그네슘 유화물의 제조특성을 비교하여 두부응고제로서 염화마그네슘유화물의 제조상 최적조건을 확립하기로 하였다. 염화마그네슘유화물의 입자는 Homomixer의 회전속도가 증가할수록 미세화 되었다. 입자크기는 $1{\sim}5{\mu}m$로 분포하고 있었다. 분산상의 입자크기가 미세화 할수록 점도의 증가와 보관 중 유상분리의 지연으로 상관관계가 있음을 나타내었다. 따라서 염화마그네슘유화물을 제조하는데 있어서 Homomixer의 회전속도는 10,000rpm 이상에서 제조하는 것이 두부응고제로서 두부의 조직 상태와 이수율 등이 가장 좋은 결과를 나타내었다.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.276-287
• /
• 2021

Project Management Information System (PMIS) is a special purpose information system that is created to provide useful information for project managers and participants to make effective and efficient decision making during projects. The use of PMIS is increasing in project based industries such as construction, defense, manufacturing, software development, telecommunication, etc. It is generally known that PMIS helps to improve the quality of decision making in project management, and consequently improves the project management performance. However, it is unclear what are the difference of PMIS impacts between industries, and still need to be studied further. The purpose of this study is to compare the impact of PMIS on project management performance between industries. We assume that the effects of PMIS will be different depending on the industry types. Five hypotheses are established and tested by using statistical methods. Data were collected by using a survey questionnaire from those people who had experience of using PMIS in various project related industries such as construction, defense, manufacturing, software development and telecommunication. The survey questionnaire consists of 5 point scale items and were distributed through e-mails and google drive network. A total of 181 responses were collected, and 137 were used for analysis after excluding those responses with missing items. Statistical techniques such as factor analysis and multiple regression are used to analyze the data. Summarizing the results, it is found that the impacts of PMIS quality on the PM performance are different depending on the industry types where PMIS is used. System quality seems to be more important for improving the PM performance in construction industry while information quality seems more important for manufacturing industry. As for the ICT and R&D industries, PMIS seems to have relatively lesser impact compared to construction and manufacturing industries.