• 한국멀티미디어학회논문지
• /
• 제8권4호
• /
• pp.439-449
• /
• 2005

분산 주기억장치 데이터베이스 관리 시스템 (DMM-DBMSs)은 데이터베이스를 참여 사이트의 주기억 장치에 저장한다. 지역 데이터베이스에 신속하게 접근할 수 있고 사이트들 사이에 고속 통신이 가능하므로 DMM-DBMS는 높은 성능을 보장한다. 최근 들어 DMM-DBMS에 대해 많은 연구 결과가 발표되었으나 아직까지 DMM-DBMS의 카탈로그 관리 기법에 대한 성능 분석 결과는 발표된 것이 없다. 본 연구에서는 높은 사이트 자치성을 보장하는 DMM-DBMS의 분할식 카탈로그 관리 기법의 성능을 실험적으로 평가하였다. 분할식 카탈로그 관리 기법을 캐시없는 분할식 카탈로그 방식(PCWC), 점진적 캐시를 이용한 분할식 카탈로그 방식(PCWIC), 완전 캐시를 이용한 분할식 카탈로그 방식(PCWFC)으로 분류하였고, 성능평가는 사이트 수, 사이트 당 터미널 수, 버퍼 크기, 쓰기 질의 비율, 지역 질의 비율 등을 중심으로 분석하였다. 분석 결과 PCWFC가 모든 경우에 가장 높은 성능을 보였다. 이는 또한 PCWIC가 시간이 흐름에 따라 더욱 높은 성능을 보인다는 것을 뜻한다. PCWFC 방식은 디스크 기반 분산 DMBS에서는 사이트 부하가 크거나 카탈로그 쓰기 비율이 높거나 원격 데이터 객체가 빈번히 액세스되는 상황에서 고성능을 보장하지 못하지만, DMM-DBMS에서는 원격 데이터 객체의 카탈로그가 자주 갱신된다고 해도 질의 컴파일과 원격 카탈로그 액세스가 고속으로 이루어질 수 있기 때문에 높은 성능을 보장하는 것이다.

• Asia pacific journal of information systems
• /
• 제29권4호
• /
• pp.856-874
• /
• 2019

The performance of recommender systems (RS) has been measured mainly in terms of accuracy. However, there are other aspects of performance that are difficult to understand in terms of accuracy, such as coverage, serendipity, and satisfaction with recommended results. Moreover, particularly with RSs that suggest multiple items at a time, such as YouTube, user satisfaction with recommended results may vary not only depending on their accuracy, but also on their configuration, content, and design displayed to the user. This is true when classifying an RS as a single RS with one recommended result and as a multiple RS with diverse results. No empirical analysis has been conducted on the influence of the content and distribution of recommendation items on user satisfaction. In this study, we propose a research model representing the content and distribution of recommended items and how they affect user satisfaction with the RS. We focus on RSs that recommend multiple items. We performed an empirical analysis involving 149 YouTube users. The results suggest that user satisfaction with recommended results is significantly affected according to the HHI (Herfindahl-Hirschman Index). In addition, satisfaction significantly increased when the recommended item on the top of the list was the same category in terms of content that users were currently watching. Particularly when the purpose of using RS is hedonic, not utilitarian, the results showed greater satisfaction when the number of views of the recommended items was evenly distributed. However, other characteristics of selected content, such as view count and playback time, had relatively less impact on satisfaction with recommended items. To the best of our knowledge, this study is the first to show that the category concentration of items impacts user satisfaction on websites recommending diverse items in different categories using a content-based filtering system, such as YouTube. In addition, our use of the HHI index, which has been extensively used in economics research, to show the distributional characteristics of recommended items, is also unique. The HHI for categories of recommended items was useful in explaining user satisfaction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권7호
• /
• pp.2530-2547
• /
• 2015

In the recent years, femtocell technology has received a considerable attention due to the ability to provide an efficient indoor wireless coverage as well as enhanced capacity. However, under the spectrum sharing between femtocell user equipment (FUEs) and the owner of spectrum macrocell user equipment (MUEs), both may experience higher uplink interference to each other. This paper proposes a novel distributed power control algorithm for the interference management in two-tier femtocell networks. Due to the assignment of licensed radio frequency to the outdoor macrocell users, the access priority of MUEs should be higher than FUEs. In addition, the quality of service (QoS) of MUEs that is expressed in the target signal-to-interference-plus-noise ratio (SINR) must always be achieved. On the other hand, we consider an efficient QoS provisioning cost function for the low-tier FUEs. The proposed algorithm requires only local information and converges even in cases where the frontiers of available power serve the target SINRs impossible. The advantage of the algorithm is the ability to implement in a distributed manner. Simulation results show that the proposed algorithm based on our cost function provides effective resource allocation and substantial power saving as compared to the traditional algorithms.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.792-799
• /
• 2003

As eTransformation and collaborative eCommerce have been on the rise, business processes between business partners are increasingly recognized as important assets that need to be integrated. These trends imply more complex and dynamic business processes should be considered in order to integrate related business organizations and business units. Moreover, these business processes are widely distributed across stakeholders. Therefore, there is a need for business process modeling that is usable, flexible and capable of integrating systems consistently across businesses and technology barriers. In this paper, a business process modeling methodology is introduced, which is based on top­do\W and model-driven approach utilizing OMG's MDA(Model-Driven Architecture) and UML profile for EDOC(Enterprise Distributed Object Computing). This provides the ability to model business process at all levels simultaneously, to combine business process models retaining their meaning, to use business process design patterns constraining the behavior of sub-processes, and to derive specific codes from a stable model as the underlying infrastructure shifts over time. In addition, we suggest some modifications of the meta-model for EDOC-Business Process Profile by adding new features in order to model business processes rigidly. This paper illustrates some examples of business process modeling and compares them with UML diagrams and IDEF models. The proposed methodology is implemented to develop a business process modeling tool.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권5호
• /
• pp.959-975
• /
• 2011

Wireless mesh networks enlarge the wireless coverage area by interconnecting relatively stationary wireless routers (mesh routers). As wireless mesh networks are envisioned to provide high-bandwidth broadband Internet service to a large community of users, the Internet gateway, which acts as a central point of Internet attachment for the mesh networks, is likely to suffer heavily from the scramble for shared wireless resources because of aggregated traffic toward the Internet. It causes performance decrement on end-to-end transmissions. We propose a scheme to balance the load in a mesh network based on link quality variation to different Internet gateways. Moreover, under the mesh coverage, mobile nodes can move around and connect to nearby mesh routers while still keeping the connections to the Internet through the best gateway in terms of link quality. In this structure, gateways perform the balancing procedure through wired links. Information about gateways and mobile node's location is distributed appropriately so that every mesh router can quickly recognize the best gateway as well as the positions of mobile nodes. This distributed information assists mobile nodes to perform fast handoff. Significant benefits are shown by the performance analysis.

• Advances in Energy Research
• /
• 제7권2호
• /
• pp.85-100
• /
• 2020

Distributed energy resources (DERs) are essential for coping with growing multiple energy demands. A microgrid (MG) is a small-scale version of the power system which makes possible the integration of DERs as well as achieving maximum demand-side management utilization. Hence, this study focuses on the analysis of optimal power dispatch considering economic aspects in a multi-carrier microgrid (MCMG) with price-responsive loads. This paper proposes a novel time-based demand-side management in order to reshape the load curve, as well as preventing the excessive use of energy in peak hours. In conventional studies, energy consumption is optimized from the perspective of each infrastructure user without considering the interactions. Here, the interaction of energy system infrastructures is considered in the presence of energy storage systems (ESSs), small-scale energy resources (SSERs), and responsive loads. Simulations are performed using GAMS (General Algebraic modeling system) to model MCMG, which are connected to the electricity, natural gas, and district heat networks for supplying multiple energy demands. Results show that the simultaneous operation of various energy carriers, as well as utilization of price-responsive loads, lead to better MCMG performance and decrease operating costs for smart distribution grids. This model is examined on a typical MCMG, and the effectiveness of the proposed model is proven.

• Journal of Information Technology Applications and Management
• /
• 제10권3호
• /
• pp.55-74
• /
• 2003

Due to the evolution of computer systems and the proliferation of Internet, numerous information resources have been constructed. The deluge of information makes the need to integrate information, which are distributed on the internet and are handled in heterogeneous systems. Recently, most of the XML -based information integration systems use XML DTD(Document Type Definition) for describing integrated global schema. However, DTD has some limitations in modeling local information resources such as datatypes. Although W3C's XML Schema is more flexible and powerful than XML DTD in specifying integrated global schema, it has more complex problems in resolving conflicts than using DTD. In this paper, we provide a taxonomy of conflict problems in integration information resources using XML Schema, and propose conflict resolution mechanism using XQuery.

• 한국전자거래학회지
• /
• 제1권1호
• /
• pp.173-194
• /
• 1996

In order to adapt today's short product life cycle and rapid technology changes., integrated systems should be extended to support PDM (Product Data Management) or CE(Concurrent Engineering). A PDM/CE environment has been developed and a prototype is Presented in this paper. Features of the PDM/CE environment are 1) integrated product information model (IPIM) includes both data model and integrity constraints, 2) database systems are organized hierarchically so that working data C8Mot be referenced by other application systems until they are released into the global database, and 3) integrity constraints written in EXPRESS are validated both in the local databases and the global database. By keeping the integrity of the product data, undesirable propagation of illegal data to other application system can be prevented. For efficient validation, the constraints are distributed into the local and the global schemata. Separate triggering mechanisms are devised using the dependency of constraints to three different data operations, i.e., insertion, deletion, and update.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.178.2-178
• /
• 2001

Today, many electronic devices and ECUs (Electronic Control Units) are used in the automotive body control systems. It becomes more common that these devices exchange data with others through an in-vehicle network. Automobile manufacturers concentrate their efforts on development of body control systems based on networks in order to save cost and to increase flexibility and safety. OSEK/VDX has been founded as a joint project in German and French automotive industry aiming at an industry standard for an open-ended architecture for distributed control units in vehicles OSEK/VDX consists of Communication (specification of data exchange within and between control units), Network Management specification of Configuration determination and monitoring and Operating System (specification of realtime executive for ECU software ...

• Asia pacific journal of information systems
• /
• 제3권1호
• /
• pp.31-53
• /
• 1993

Computer Aided Software Engineering(CASE) tools are suggested as an automated method for the efficient development of softwares. This study are intended to measure the use level of CASE tools and to provide the meaningful information on the whole software development environment supported by CASE tools. Therefore, the results of a survey on CASE environment in Korea are empirically reported and analyzed. The use of CASE tools is measured; purposes purchasing CASE tools and achievement levels are investigated. Implications from the comparative analysis of the utilization of software engineering methodologies between the CASE user group and the non-user group are described. A proposition is suggested to check the request frequency for program change. Further studies on the reverse engineering, program reuse and the use of CASE tools under distributed processing systems such as client-server environments are suggested.