• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.116-120
• /
• 2011

In this paper, we have designed and implemented the integrated protocol gateway for the integration of CAN and Profibus networks. To do that, we used the Switched Ethernet as Backbone network, and each fieldbus network is connected by CAN/Ethernet or Profibus/Ethernet gateway, and each gateway perform the translation between fieldbus and Ethernet frames. Futhermore, we realized the real-time features in the environment of the Switched Ethernet by applying the distributed hard real-time scheduling algorithm among each gateways. To implement tht CAN/Ethernet and Profibus/Ethernet gateways, we used the Linux of kernel 2.6.31.12 real-time patched version(PREEMTED_RT), and we could verify successful message translation and real-time features through real implementation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.231-234
• /
• 2011

Recently, the smart RFID tag technology which can measure external changing environment is globally interesting. In this paper, development of the Smart RFID tag using temperature sensor was represented. Smart RFID tag is basically comprised of antenna which has its bandwidth of 13.56Mhz, temperature sensors and data processing controller. Antenna design and smaller PCB production can be used to agri-food wrap. Since the smart RFID tag is distributed as an attachment to agri-food wrap, consumer can check temperature changes in the distribution process. Because temperature change check in real time, food confirm the status of transportation and the freshness. Also, smart RFID tag can be applied to proposed smart refrigerator.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.43-46
• /
• 2005

The detectability of radar depends on RCS(radar cross section). The RCS for complex radar targets may be only approximately calculated by using low-frequency or high-frequency scattering methods, while the RCS for simple rob targets can be exactly obtained by applying an eigen-function method. However, the conventional methods for calculation of RCS are computationally complex. We propose an approximation method for RCS calculation by MUSIC algorithm In this research, it is assumed toot the radar target is considered as a ring of scatterers. The amplitudes of scatterers may be statistically distributed. As the result, the radar signal model is proposed to use MUSIC, and the RCS is calculated by a simple linear algebraic method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.267-270
• /
• 2006

The International GNSS Service (IGS) has managed the global GNSS network and provided the highest quality GNSS data and products, which are GPS ephemerides, clock information and Earth orientation parameter, as the standard for GNSS. An important part of its works is to provide the precise orbits of GPS satellites. GPS satellites send their orbit information (broadcast ephemerides) to users and their accuracies are approximately 1.6 meters level, but those accuracies are not sufficient for the high precise applications which require millimeters precision. The current accuracies of the IGS final orbits are within 5 centimeters level and they are used for Earth science, meteorology, space science, and they are made by the IGS analysis centers and combined by the IGS analysis center coordinator. The techniques making the products are very difficult and require the high technology. The Korea Astronomy and Space Science Institute (KASI) studies to make the IGS products. In this study, we developed our own processing strategy and made GPS ephemerides using Bernese GPS software Ver. 5.0. We used the broadcast ephemerides as the initial orbits and processed the globally distributed 150 IGS stations. The result shows about 6 to 8 centimeters in root-mean-squares related to IGS final orbits in each day during a week. We expect that this study can contribute to secure our own high technology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.1001-1004
• /
• 2006

Many researches have been processed to reconstruct corrupted an image by noise in fields of signal processing such as image recognition and compute. vision, and AWGN(additive white gaussian noise) and impulse noise are representative. Impulse noise consists of fired-valued(salt & pepper) impulse noise and random-valued impulse noise, and non-linear filters such as SM(standard median) filters are used to remove this noise. But basic SM filters still generate many errors in edge regions of an image, and in order to overcome this problem a variety of methods have been researched. In this paper, we proposed an impulse noise removal algorithm which is superior to the edge preserving capacity. At this tine, after detecting a noise by using the noise detector, we applied a noise removal algorithm based on the min-max operation and compared the capacity with existing methods through simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.426-429
• /
• 2006

A distributed healthcare monitoring system prototype for clinical and trauma patients, was developed, using wireless sensor network node. The proposed system aimed to measure various vital physiological health parameters like ECG and body temperature of patients and elderly persons and transfer his/ her health status wirelessly in Ad-hoc network, to remote base station which was connected to doctor's PDA/PC or to a hospital's main Server using wireless sensor node. The system also aims to save the cost of healthcare facility for patients and the operating power of the system because sensor network is deployed widely and the distance from sensor to base station was shorter than in general centralized system. The wireless data communication will follow IEEE 802.15.4 frequency communication with ad-hoc routing thus enabling every motes attached to patients, to form a wireless data network to send data to base-station, providing mobility and convenience to the users in home environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.411-413
• /
• 2010

The wireless AP positioning system is under active progress regarding research and commercialization due to its merit of being able to overcome the representing demerits of existing GPS positioning, which are signal distortion and poor signal reception. This system's feature is to collect AP information distributed throughout the real world, store it on database, and execute positioning by comparing with searched AP information. The positioning process uses collected data, whereas comparison of database data uses the fingerprinting method. The fingerprinting method is a probabilistic modeling method that acquires as much of the data collected from one location upon database composition, to store the value's average value and use it in positioning. Yet, using the average value may contain the probability of errors. Such errors are fatal weaknesses for services based on the background of accurate positioning. This paper deals with the characteristics and problems of the previously used wireless AP positioning system, and proposes measures of using AP information for outdoor positioning in order to solve the aforementioned problems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.356-359
• /
• 2017

According to the plan of operation of the Ministry of Education, IWB (Interactive White Board) was distributed to one or two classrooms per school. Therefore, instead of the overhead projector (OHP) and the screen, the visual presenter and the IWB replaced the role. However, the development speed of the imaging device and the display device could not keep up, and the utilization was often lowered. In this study, we study to obtain a high resolution image using the camera of smartphone. It uses WiGig(Wireless Gigabit) technology to transmit the acquired high-resolution images to IWB or large-screen TV without delay in wireless communication. In addition, while the smartphone camera is equipped with a lens of a wide field of view(FOV), the microscope lens can be used to magnify and magnify a specific portion of a smartphone 400 times. As s result of this study it will be used as active material for real-time 400 times magnification in education and research field.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.20-25
• /
• 2012

New Zealand suffers from regular floods, these being the most common source of insurance claims for damage from natural hazard events in the country. This paper describes the origin and distribution of the largest floods in New Zealand, and describes the systems used to monitor and predict floods. In New Zealand, broad-scale heavy rainfall (and flooding), is the result of warm moist air flowing out from the tropics into the mid-latitudes. There is no monsoon in New Zealand. The terrain has a substantial influence on the distribution of rainfall, with the largest annual totals occurring near the South Island's Southern Alps, the highest mountains in the country. The orographic effect here is extreme, with 3km of elevation gained over a 20km distance from the coast. Across New Zealand, short duration high intensity rainfall from thunderstorms also causes flooding in urban areas and small catchments. Forecasts of severe weather are provided by the New Zealand MetService, a Government owned company. MetService uses global weather models and a number of limited-area weather models to provide warnings and data streams of predicted rainfall to local Councils. Flood monitoring, prediction and warning are carried out by 16 local Councils. All Councils collect their own rainfall and river flow data, and a variety of prediction methods are utilized. These range from experienced staff making intuitive decisions based on previous effects of heavy rain, to hydrological models linked to outputs from MetService weather prediction models. No operational hydrological models are linked to weather radar in New Zealand. Councils provide warnings to Civil Defence Emergency Management, and also directly to farmers and other occupiers of flood prone areas. Warnings are distributed by email, text message and automated voice systems. A nation-wide hydrological model is also operated by NIWA, a Government-owned research institute. It is linked to a single high resolution weather model which runs on a super computer. The NIWA model does not provide public forecasts. The rivers with the greatest flood flows are shown, and these are ranked in terms of peak specific discharge. It can be seen that of the largest floods occur on the West Coast of the South Island, and the greatest flows per unit area are also found in this location.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.879-879
• /
• 2012

강우현상의 공간적 변동성에 대한 해석은 수자원 계획 및 관리를 위해 중요한 관심사가 되고 있다. 일반적으로 우리가 얻을 수 있는 강우자료는 한 지점에 설치되어 있는 우량계에 의한 관측된 지점강우량자료이다. 기존의 집중형 수문모형이 유출과정의 공간적인 분포 및 변화를 유역단위로 평균화해서 취급하는 개념기반의 모형임에 반해서 분포형 수문모형은 유역을 수문학적으로 균일한 매개변수를 갖는 소유역 또는 격자망으로 구분하여 적용하는 것으로, 도시화 등 토지이용의 변화나 기타 유역내의 물리적인 특성의 변화가 수문과정에 미치는 영향을 잘 모의할 수 있다. 따라서 본 연구에서는 Vflo$^{TM}$ 분포형 강우-유출 모형과 IDW, Ordinary Kriging, Thiessen 등의 강우 분포 기법을 이용하여 낙동강 제 1지류인 금호강의 동촌 수위관측소 유역($1,544km^2$)을 출구로 하여 강우-유출모의를 하였다. 이를 위하여 강우-유출에 영향을 주는 매개변수를 선정하고 동촌 수위관측소의 실측 유량자료를 바탕으로 하여 IDW, Kriging, Thiessen 등의 면적강우량 산정방법별로 모형의 보정(2007, 2009) 및 검증(2010)을 실시하였다. 모의 된 유출량과 실측유량의 상관성은 결정계수 $R^2$에서 IDW 과 Kriging의 경우 0.95 ~ 0.99의 상관성을 나타냈으며 Thiessen 의 경우 0.94 ~ 0.99의 값을 나타냈다. Nash-Sutcliffe 모형효율은 IDW의 경우 0.95 ~ 0.98, Kriging의 경우 0.94 ~ 0.99를 나타냈으며 Thiessen의 경우는 0.90 ~ 0.98의 모형효율을 나타내었다. 이때 포화투수계수와 조도계수가 전체 유량과 첨두시간에 영향을 주었다. 호우사상을 선정하여 검보정을 실시 한 결과, 유역의 유출 모의를 수행하였을 때 선행강우량에 따라서 토양의 침투능에 영향을 많이 주고 있기 때문에, 선행 토양함수조건(Antecedent Moisture Condition: AMC)으로 분류한 뒤에 AMC 조건에 따라서 유출-모의를 수행하는 것이 타당하다고 판단된다.