• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1244-1255
• /
• 2017

The space vector pulse width modulation (SVPWM) technique is a popular PWM method for medium voltage drive applications. Conventional SVPWM (CSVPWM) and bus clamped SVPWM (BCSVPWM) are the most common SVPWM techniques. This paper evaluates the performance of various advanced BCSVPWM strategies in terms of their harmonic distortion and switching loss based on a uniform frame work. A uniform frame work, pulse number captures the performance parameter variations of different SVPWM strategies for various number of samples with heterogeneous pulse numbers. This work compares different advanced BCSVPWM techniques based on the modulation index and location of the clamping position (zero vector changing angle ) of a phase in a line cycle. The frame work provides a fixed fundamental frequency of 50Hz. The different BCSVPWM switching strategies are implemented and compared experimentally on a 415V, 2.2kW, 50Hz, 3-phase induction motor drive which is fed from an IGBT based 2 KVA voltage source inverter (VSI) with a DC bus voltage of 400 V. A low cost PIC microcontroller (PIC18F452) is used as the controller platform.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.892-901
• /
• 2018

SiC MOSFETs have been used to improve system efficiency in high frequency converters due to their extremely high switching speed. However, this can result in undesirable parasitic oscillations in practical systems. In this paper, models of the key components are introduced first. Then, theoretical formulas are derived to calculate the switching oscillation frequencies after full turn-on and turn-off in clamped inductive circuits. Analysis indicates that the turn-on oscillation frequency depends on the power loop parasitic inductance and parasitic capacitances of the freewheeling diode and load inductor. On the other hand, the turn-off oscillation frequency is found to be determined by the output parasitic capacitance of the SiC MOSFET and power loop parasitic inductance. Moreover, the shifting regularity of the turn-off maximum peak voltage with a varying switching speed is investigated on the basis of time domain simulation. The distortion of the turn-on current is theoretically analyzed. Finally, experimental results verifying the above calculations and analyses are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.35-45
• /
• 1991

Multi layer neural network using backpropagation learning algorithm is used to achieve identification and orientation estimation of different classes of aircraft in the variety of 3-D orientations. In-plane distortion invarient$(L,\;{\Phi})$ feature was extracted from each aircraft image to be used for training neural network aircraft classifier. For aircraft identification the optimum structure of the neural network classifier is studied to obtain high classification performance. Effective reductioin of learning time was achieved by using modified backpropagation learning algorithm and varying, learning parameters.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.325-332
• /
• 2008

The prediction method of TS parameters, frequency response, and electrical input impedance is proposed with physical properties of parts and results of electromagnetic FEA(Finite Element Analysis) in a loudspeaker driver design. In design for weight reduction and improvement of flux density asymmetry, the prediction results are well coincided with measurement ones. As the applications, it can be applied in design for improvement of the $2^{nd}$ harmonic distortion with flux density distribution analysis. The proposed method is expected to be utilized for reducing trial-and-error process in electromagnetic parts design. It can also be used for providing guidelines for parts selection in the early stages.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.868-872
• /
• 2005

Individual management of the animal is the first step towards reaching the goal of precision livestock farming that aids animal welfare. Accurate recognition of each individual animal is important for precise management. Electronic identification of cattle, usually referred to as RFID (Radio Frequency Identification), has many advantages for farm management. In practice, however, RFID implementations can cause several problems. Reading speed and distance must be optimized for specific applications. Image processing is more effective than RFID for the development of precision farming system in livestock. Therefore, the aim of this paper is to attempt the identification of cattle by using image processing. The majority of the research on the identification of cattle by using image processing has been for the black-and-white patterns of the Holstein. But, native Japanese and Korean cattle do not have a consistent pattern on the body, so that identification by pattern is impossible. This research aims to identify to Japanese black cattle, which does not have a black-white pattern on the body, by using image processing and a neural network algorithm. 12 Japanese black cattle were tested. Values of input parameter were calculated by using the face image values of 12 cows. The face was identified by the associate neural memory algorithm, and the algorithm was verified by the transformed face image, for example, of brightness, distortion, noise and angle. As a result, there was difference due to a transformation ratio of the brightness, distortion, noise, and angle. The algorithm could identify 100% in the range from -30 to +30 degrees of brightness, -20 to +40 degrees of distortion, 0 to 60% of noise and -20 to +30 degree of angle transformed images.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.538-545
• /
• 2002

In the orthogonal frequency division multiplexing (OFDM) system, the nonlinear distortion in the high power amplifier(HPA) degrades the system performance because of the high peak-to-average power ratio (PAPR). In this paper, a semi-analytical method is newly proposed for the performance evaluation of the nonlinearly distorted OFDM communication system. In the proposed method, at first, the probability density function (pdf) of the PAPR is generated by computer simulation. Then, mean and variance of the non-linear distortion noise process are computed. Next, the overall BER is found by the analytical method. When the equivalent SSPA model is applied in case of the QPSK/16-QAM and AWGN channel, the BER is calculated for the variation of the IBO(input back-off) and PAPR parameter. It is shown that the results by proposed method are very similar to those of the conventional Monte-Carlo method. The computation time can be considerably reduced than the conventional method that depends on the magnitudes of BER and IBO.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.576-585
• /
• 2001

In this paper, we investigated the method of compensation for optical pulse shape distortion due to both chromatic dispersion and SPM(self phase modulation) in a single mode fiber We selected MSSI(mid-span spectral inversion) as compensation method using OPC(optical phase conjugator). We used EOP(eye-opening penalty) parameter in order to evaluate the efficiency of waveform distortion compensation. In this paper, we induced optimum pump power level in optical phase conjugator through analytic method of computer simulation. And we investigated input signal power range being able to maintain stable reception performance under the condition of optimum pump power. We verified the possibility of high performance optical transmission system realization through the inducement and application of optimum pump power, input signal power and in-line amplifier spacing, because power control is important in the compensation for optical pulse distortion.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.3
• /
• pp.235-243
• /
• 2010

This paper describes a design method of LCL filter for grid-connected three-phase PWM inverter. First, by analyzing the ripple component of phase voltages and currents according to the PWM pattern of grid-connected three-phase inverter, the RMS value of the current ripple can be calculated. Then based on the analysis, the current THD in the inverter-side can be defined. After that by analyzing the dependency between the current THD of the system and the current ripple attenuation, the parameter of LCL filter can be designed. Finally, the described LCL filter design method is verified by showing a good agreement between the target current $THD_g$ and the actual one through the simulation and experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.107-113
• /
• 1997

To achive a robust Korean word recognition system for both channel distortion and additive noise, maximum a posteriori estimation(MAP) adaptation is proposed and the effectiveness of environmental adaptation for improving recognition performance is investigated in this paper. To do this, recognition experiments using MAP adaptation are carried out for the three different speech ; 1) channel distortion is introduced, 2) environmental noise is added, 3) both channel distortion and additive noise are presented. Theeffectiveness of additive feature parameters, such as regressive coefficients and durations, for environmental adaptation are also investigated. From the speaker independent 100 words recognition tests, we had 9.0% of recognition improvement for the case 1), more than 75% for the case 2), and 11%~61.4% for the case 3) respectively, resulting that a MAP environmental adaptation is effective for both channel distorted and noise added speech recognition. But it turned out that duration information used as additive feature parameter did not played an important role in the tests.

• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.91-100
• /
• 1980

A formula for calculation of the magnetic moments for octahedral $[Ti(III)A_3B_3]$ type complexes with axial symmetry has been developed and the magnetic moments for these complexes are calculated, using the experimental values of the distortion parameters$({\delta})$, spin-orbit coupling constants and orbital reduction factors. The calculated magnetic moments for axially distorted octahedral $[Ti(III)A_3B_3]$ type complexes are in resonable agreement with the experimental valuest It is found that the calculated magnetic moments decrease as the extent of axial distortion increases and the orbital reduction factor decreases. A calculation method of the magnetic moments for octahedral $[Ti(III)A_3B_3]$ type complexes which are in a ligand field of lower than axial symmetry has also been developed and the structure of distorted octahedral $[Ti(III)A_3B_3]$ type complexes are discussed on the basis of the of the calculated magnetic moments.