• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.107-111
• /
• 2013

The welding distortion is caused by welding heat in the structures which are widely used in shipbuilding and automotive industries, thus many researchers have proposed such methods to control the welding distortion through trials and numerical studies. The welding distortion has been the main cause of low productivity due to the structural strength degradation, apparent flaw, additional deformation caused by the process followed the current assembly step, and the increase of correction workload. The deformation of fillet welding is investigated in this study, and the influence of the rib height on the welding distortion is verified through the actual experiment. And the numerical analysis model using the FE software MSC.marc for analysis of welding distortion is proposed.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.87-93
• /
• 2009

Variation of the observer's viewing position is one of the major causes of image space distortion in the stereoscopic display. Especially, a large image distortion, which is caused by different depth direction positions of the observer's two eyes, is made by the observer's rotation movement in relation to the center of the screen. This is different from distortion of horizontal and depth directional movement of the observer. In this paper, we analyzed distortion of the image space due to the observer's rotation movement and showed the corrected result of distortion through simulation in the stereoscopic display. Finally, we showed that the distortion shape of the observer's rotation movement is different from horizontal and depth directional movement of the observer.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1833-1842
• /
• 2016

In grid-connected converter control, grid voltage feedforward is usually introduced to suppress the influence of grid voltage distortion on the converter's grid-side AC current. However, owing to the time-delay in control systems, the suppression effect of the grid voltage distortion is seriously affected. In this paper, the positive effects of the grid voltage feedforward control are analyzed in detail, and the time-delay caused by the low-pass filter (LPF) in the voltage filtering circuits and digital control are summarized. In order to reduce the time-delay effect on the performance of the feedforward control, a voltage feedforward control strategy with time-delay compensation is proposed, in which, a leading correction of the feedforward voltage is used. The optimal leading step used in this strategy is derived from analyzing the phase-frequency characteristics of a LPF and the implementation of digital control. By using the optimal leading step, the delay in the feedforward path can be further counteracted so that the performance of the feedforward control in terms of suppressing the influence of grid voltage distortion on the converter output current can be improved. The validity of the proposed method is verified through simulation and experiment results.

• Journal of Internet Computing and Services
• /
• v.13 no.3
• /
• pp.49-59
• /
• 2012

Throughout developing digital technology, reproduction of image is growing better day by day. And at the same time, diverse image editing softwares are developed to manage images easily. In the process of editing images, those programs could delete or modify EXIF files which have the original image information; therefore images without the origin source are widely spread on the web site after editing. This matter could affect analysis of images due to the distortion of originality. Especially in the court of law, the source of evidence should be expressed clearly; therefore digital image EXIF file without deletion or distortion could not be the objective evidence. In this research, we try to trace the identification of a digital camera in order to solve digital images originality, and also we focus on lens distortion correction algorism which is used in digital image processing. Lens distortion correction uses mapping algorism, and at this moment it also uses interpolation algorism to prevent aliasing artifact and reconstruction artifact. At this point interpolation shows the similar mapping pattern; therefore we want to find out the interpolation evidence. We propose a minimum filter algorism in order to detect interpolation pattern and adjust the same minimum filter coefficient in two areas; one has interpolation and the second has no interpolation. Throughout DFT, we confirm frequency character between each area. Based on this result, we make the final detection map by using differences between two areas. In other words, thereby the area which has the interpolation caused by mapping is adjusted using minimum filter for detection algorism; the second area which has no interpolation tends to different frequency character.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.680-686
• /
• 2006

Document images captured by scanners have only skewing distortion. But camera captured document images have not only skew but also vignetting effect and geometric distortion. Vignetting effect, which makes the border areas to be darker than the center of the image, make it difficult to separate characters from the document images. But this effect has being decreased, as the lens manufacturing skill is developed. Geometric distortion, occurred by the mismatch of angle and center position between the document image and the camera, make the shape of characters to be distorted, so that the character recognition is more difficult than the case of using scanner. In this paper, we propose a method that can increase the performance of character recognition by correcting the geometric distortion of document images using a linear approximation which changes the quadrilateral region to the rectangle one. The proposed method also determine the quadrilateral transform region automatically, using the alignment of character lines and the skewed angles of characters located in the edges of each character line. Proposed method, therefore, can correct the geometric distortion without getting positional information from camera.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.323-330
• /
• 2009

The demand that we are monitoring security and crime of the urban facilities is increasing recently, but the using CCTV devices are expensive. In this research, we enlarge the angle of view using the Fish-eye Lens and the Photogrammetry, the efficiency of monitoring enhance. First, we carry out the calibration of the Fish-eye Lens indoors, we calculate the correction parameters, and then covert the original image-point to new image-point correcting distortion. Second, the correction program with the correction parameters can obtain the real-time correcting image. Lastly, for authorization the developed program we compare correcting-image with scanning-imge, it is showed the RMSE is 3.2pixel.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.103-110
• /
• 2008

General lens, widely using in Photogrammetry, has narrow view, and have to adjust "Image-Registration Method" after obtain images and it need cost; economic, period of time. Recent days, there is various study that use wide-angle lens, usually for robotics field, put to practical use in photogrammetry instead of general lens. In this studies, distortion tendency of wide-angle lens and utilize the correction techniques suitable to wide-angle lens by the existing photographic survey methods. After carrying out the calibration of the wide-angle lens, we calculated the correction parameters, and then developed the method that convert the original image-point to new image-point correcting distortion. For authorization the developed algorithm, we had inspection about shape and position; there are approximately 2D RMSE of 3 pixel, cx = 2, and cy = 3 different.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.100-106
• /
• 2017

Outline map is used for the description and reconstruction of the traffic accident. One way to produce the outline map is by adopting detailed measurements from the accident site such as final position of the vehicle and pedestrian, width of the road, and locations of the oil and tire marks. This method consumes large amount of time not to mention that of the production of detailed version as fine as the picture of the site. Aerial recording equipment so called HeliCam can produce an outline map that can substitute that of manual method with even faster production time and higher resolution. However, the produced picture have errors which are resulted by distortion due to the characteristics of camera and direction of the photographing. This paper provides correction of the distortion of oultline map produced by HeliCam using Adobe Photoshop and PC-Rect. The result showed resonable error range less than 6 cm(0.1%) for $60m{\times}30m$ area taken by HeliCam. The presented method develops outline map with small error, which is useful to traffic accident analysis, and traffic accident cases analyzed in this study were also.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.114-123
• /
• 2014

Vehicle Black Box (Event Data Recorder EDR) only recognizes the general surrounding environments of load. In addition, general EDR is difficult to recognize the images of a sudden illumination change. It appears that the lens is being a severe distortion. Therefore, general EDR does not provide the clues of the circumstances of the accident. To solve this problem, we estimate the value of Normalized Luminance Descriptor(NLD) and Normalized Contrast Descriptor(NCD). Illumination change is corrected using Normalized Image Quality(NIQ). Second, we are corrected lens distortion using model of Field Of View(FOV) based on designed method of fisheye lens. As a result, we propose integration algorithm of two methods that correct distortions of images using each Gamma Correction and Lens Correction in parallel.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2072-2074
• /
• 1997

A new low-cost high power factor correction circuit for electronic ballasts is proposed. The proposed circuit provides good power factor correction, low current harmonic distortion and cost-effectiveness. The prototype meets the IEC555-2 requirements satisfactorily with nearly unity power factor.