• Journal of dental hygiene science
• /
• v.10 no.6
• /
• pp.451-457
• /
• 2010

It is well known that most of the beverages on sale contain acid. Among these beverages, one of the most typically purchased products is Coca-Cola ($Coke^{(R)}$), which affects the demineralization of the tooth enamel surface. However other beverages also affect the erosion of the tooth enamel surface. Therefore, the aim of this study was to observe the influence that acid containing beverages have upon the tooth enamel surface. In this study, 30 enamel specimens were obtained from extracted maxillary third molars without cracks. The study measured the pH concentrations and the Ca and P concentration levels of the acidic beverages. The control without exposure was kept in distilled water, and each enamel specimen was stored for 30-min, 60-min, and 120-min. The erosion effect of the enamel surface was observed by SEM. The results obtained from this study can be summarized as follows: 1. The pH concentration of acidic beverages, without milk, was 3.105 on average. The beverages eroded the enamel surface and the erosion degree was determined by the pH concentration of beverages. 2. The erosion degree significantly increased by as the exposure time increased. The difference in the erosion degree between the 30-min group and the 60-min and the 120-min group was significant, but the erosion degree of the 120-min group was significantly less than that of the initial group. 3. When compared with the beverages containing similar pH concentrations, the demineralization degree of the beverages containing higher concentrations of Ca and P was lower.

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.122-127
• /
• 2009

This study was to separate wild yeast from the Houttuynia Cordata Thunb(HC) extracts fermented in traditional way and investigate the characteristics of fermentation from the HC extracts. As a result, the longer the cultivation time, the more the contents of alcohol in $15^{\circ}Brix$ sugar solutions increased. When it reached to 90 hours since it cultivated, it ranked HCE 12%, HCD 11.2%, and HCA 10.5% in order. As for HCF, HCG, HCB, and HCC), this study has shown that the contents of alcohol were from 7.5% through 8.5%. As a result of selecting germ strains like HCE and HCD with the highest alcohol-genicity in the sugar solutions as separated yeast from HC and of comparing and reviewing the existing Saccharomyces germ strains and fermentation power in the medium of HC(Juice extraction of HC : Distilled water(1:1), this study has found out that 'pH' decreased from $4.09{\sim}4.12$ before fermentation through $3.57{\sim}3.78$ after fermentation. And, the sugar concentration decreased from $15.00{\sim}15.19^{\circ}Brix$ through $7.75{\sim}9.57^{\circ}Brix$ before fermentation. Also, the acid value increased from $0.138{\sim}0.210%$ before fermentation through $0.282{\sim}0.45%$ after fermentation. In addition, as the contents of alcohol became $3.6{\sim}4.6%$ after fermentation, isolates HCD and HCE from HC had higher value rather than ones of DJ97, YJK, R12, and RCY separated from persimmons, apples, and grapes. The result value of color was minimum $4.75{\pm}1.44$ and maximum $6.85{\pm}1.63$, and HCE marked the highest record among the items of sensory evaluation. The overall acceptability was in normal level like minimum $3.95{\pm}1.17$ and maximum $5.00{\pm}1.41$. It is considered as it could lower sensory evaluation because the acceptability of flavor was not satisfied. After all, the significance(p<0.05) among the germ strains was not recognized in aspects of color, flagrance, flavor, and overall acceptability.

• Food Science and Preservation
• /
• v.21 no.4
• /
• pp.544-548
• /
• 2014

This study was conducted to investigate the effects of various heat treatments on the microbial reduction and germination of red radish seeds for the development of effective and economical sterilization methods of improving microbial safety without reducting the germination rate. Hydrothermal treatment was conducted at 60, 65, 70, 75, 80, and $90^{\circ}C$ for 30 and 60 seconds, and dry heat treatment was performed at 70, 80, 90, and $100^{\circ}C$ for 5 minutes. In the seeds that underwent the hydrothermal treatment, time had little effect on the microbial reduction. There was no significant microbial reduction over time. However, there was significant microbial reduction as temperatures increased (p<0.001). The total plate count (TPC) was reduced by more than 3 logs, and Listeria monocytogenes was not detected at temperatures above $70^{\circ}C$. In the seeds that were subjected to the dry heat treatment, the TPC and the population of the L. monocytogenes were significantly reduced as the temperatures increased (p<0.001). After treatment at $100^{\circ}C$ for 5 minutes, the TPC and the L. monocytogenes were reduced by 3 logs. As with the microbial reduction, time had little effect on the germination. There were no significant changes in the germination after the hydrothermal treatment over time; but at the temperatures above $75^{\circ}C$, the germination rate significantly decreased as the temperature increased (p<0.001). When the seeds were soaked after the hydrothermal treatment, their germination was stimulated. The dry heat treatment at temperatures of $80^{\circ}C$ and higher significantly decreased the germination rate as the temperature increased (p<0.001). Dry heat treatment before the germination of the seeds soaked in distilled water for three hours significantly decreased the germination at temperatures greater than $90^{\circ}C$ (p<0.05). This study showed that appropriate heat treatments can increase the microbiological safety and germination of red radish seeds.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.352-363
• /
• 2017

To investigate skin-whitening effect of Adenophora triphylla var. japonica sprout extract, antioxidant activity, inhibitory effect on tyrosinase and melanin synthesis in B16/F10 melanoma cell were examined. Total phenolic content (246.25 mg GAE/g) and total flavonoid content (303.94 mg RE/g) of ethyl acetate fraction from Adenophora triphylla sprout (EFAT) showed the highest contents than other fractions (n-hexane, chloroform and distilled water). Antioxidant activities of EFAT has been evaluated using ABTS, DPPH radical scavenging activities, FRAP and inhibitory effect of lipid peroxidation. EFAT showed excellent radical scavenging activity and inhibitory effect on MDA production. Inhibitory effect of tyrosinase as a major enzyme of melanin synthesis was also measured. In these results, EFAT showed higher inhibitory effect against L-DOPA (51.27%) than L-tyrosine. $IC_{50}$ value on ${\alpha}-glucosidase$ was $41.93{\mu}g/ml$. In B16/F10 melanoma cells, EFAT inhibited melanin synthesis at $200{\mu}g/ml$ concentration (about 42% decrease). Finally, main physiological compounds of EFAT were identified as a rutin and a chlorogenic acid using high performance liquid chromatography.

• Journal of dental hygiene science
• /
• v.12 no.5
• /
• pp.477-485
• /
• 2012

This study evaluate the influence of food staining food and bleaching on the color (CIELAB) and reflectivity of two-way (anterior & posterior) composite resin and flowable composite resin. There were 6 immersion media: kimchi, red pepper paste, blueberry, tea, curry and distilled water. A total of 36 specimens ($11{\times}11{\times}2$ mm) were prepared and immersed in each immersion media for 8 days at $37^{\circ}C$. Their color and reflectivity measured with the spectrophotometer at baseline and every 24 hours. Data from the color change and reflectivity were collected and subjected to statistical analysis by ANOVA, ANCOVA and RM-ANOVA. Curry showed the highest influence on color change and blueberry on brightness (p<0.001) on both resins. Bleaching after polishing made color change more than polishing or bleaching independently on two-way (anterior & posterior) composite resin, but not on flowable composite resin. It was suggested cleaning the mouth after taking curry and blueberry be needed to maintain the original color of composite resin.

• Journal of dental hygiene science
• /
• v.14 no.3
• /
• pp.319-324
• /
• 2014

The aim of this study was to evaluate influences of titanium dioxide ($TiO_2$) concentrations and irradiation times on growth of Streptococcus mutans when irradiated by visible light (405 nm wavelength) and by ultraviolet light (254 nm wavelength). To find the optimal antibacterial concentration of $TiO_2$, 0.01, 0.1, 1.0, and 10.0 mg/ml $TiO_2$ suspension was prepared with sterilized distilled water. S. mutans cultured media was added to $TiO_2$ solution to set the final cell count to $10^4CFU/ml$. The photocatalytic reaction was induced by irradiating 254 nm and 405 nm lights for 10 minutes. To compare the bactericidal activities according to irradiation times, all photocatalytic reaction was carried out with 0.1 mg/ml $TiO_2$ for 0, 10, 20, 30, and 40 minutes with both lights. After the photocatalytic reaction, $100{\mu}m$ of the reaction mixture was immediately plated on brain heart infusion agar. These plates were placed at 5% $CO_2$, $37^{\circ}C$, for 24 hours and the bacterial colonies were counted. All experiments were performed in quintuplicate. One-way ANOVA was used to determine whether there were any significant differences between the $TiO_2$ concentrations or the irradiation times. The most effective concentration of $TiO_2$ for its photocatalytic bactericidal effect on S. mutans was 0.1 mg/ml when irradiated with 254 nm and 405 nm lights. The longer the irradiation time, the bigger the bactericidal effect for both wavelengths. Over 99% of bacteria in the inoculum were killed after irradiation with 254 nm for 20 minutes and with 405 nm for 40 minutes. In conclusion, a photocatalytic reaction of $TiO_2$ induced by visible light of 405 nm constitutes the bactericidal effect on S. mutans.

• Journal of the Korean Academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.636-644
• /
• 2004

Recently, self-etching adhesive system have been developed and bonding procedures simplified into one or two steps, which are simultaneously applied to both enamel and dentin. These systems are easy to use and have the potential for good clinical success. The purpose of this study is to evaluate in vitro the microleakage on the cementum/dentin and enamel walls in composite resin restoration of Class V cavities, regarding the use of different adhesive systems. 30 human premolars were divided into 3 groups. A standardized Class V preparation was prepared on the buccal and lingual surface of each premolar. The preparation were made parallel to the cementoenamel junctions, with the gingival half of the preparation extending 1mm apical to the cementoenamel junction. After adhesive system was applied to teeth as manufacture's recommendation, hybrid resin composite was filled in bulk into the preparation and light polymerized according to manufacturer's recommendations. Specimen were stored in distilled water at $37^{\circ}C$ for 5 days and thermocycled 1000 times ($5^{\circ}C{\pm}2^{\circ}C\;and\;55^{\circ}C{\pm}2^{\circ}C)$, then immersed in a 2% methylene blue solution for 12 hours. After sectioning mesio distally through the restorations, the degree of dye penetration was scored under a stereomicroscope at ${\times}\;25$ magnification. The data were analyzed statistically using t-test and one-way ANOVA. The results were as follows: ${\cdot}$ There is no adhesive system which can prevent microleakage perfectly. ${\cdot}$ There is significant difference in microleakage between enamel margin and dentin margin (p<0.0001). ${\cdot}$ In enamel margin, self-etching primer systems did not show any significant difference comparing total-etching system. In denin margin, self-etching primer systems did not show any significant difference comparing one-bottle adhesive system used in combination with total-etching.

• Journal of the Korean Academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.1-12
• /
• 2010

The aim of this study was to evaluate the preventive effect of commercially available anticariogenic products, specifically, the tooth cream containing Casein phosphopeptide-amorphous calcium phosphate(CPP-ACP), fluoride varnish and low-level fluoride mouthrinse on enamel erosion induced by carbonated beverage in a short period of time. Enamel specimens were treated as follows and were then kept in artificial saliva for 24 hours followed by further processing by alternately soaking them in Cola beverage and in distilled water for 1 minute each five times. Group 1: control group (no treatment) Group 2: tooth cream with CPP-ACP Group 3: fluoride varnish (1,000 ppm F) Group 4: low-level fluoride mouthrinse (227 ppm F) Group 5: fluoride varnish + tooth cream with CPP-ACP Group 6: low-level fluoride mouthrinse + tooth cream with CPP-ACP Microhardness and erosion depth were measured and the mineral loss of each specimen was evaluated by measuring the volumetric fluorescence change(${\Delta}Q$) against the stable fluorescent grid using quantitative light-induced fluorescence(QLF). The experiment lasted for 6 days repeated each day. The results were as follows: 1. The microhardness was increased as follows: Group $1{\leq}2{\leq}4$<6<$3{\fallingdotseq}5$. 2. The mean erosion depth was increased as follows: Group $5{\fallingdotseq}3$<6<$4{\fallingdotseq}2{\fallingdotseq}1$. 3. The ${\Delta}Q$ was increased as follows: Group $1{\fallingdotseq}2{\leq}4{\leq}6{\leq}3{\fallingdotseq}5$. The decrement of ${\Delta}Q$ was similar between group 1 and 2, group 4 and 6 and group 3 and 5. 4. The ${\Delta}Q$ showed positive correlation with microhardness (r=0.96, p<0.05), while it was negatively correlated to erosion depth (r=-0.96, p<0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.197-207
• /
• 2011

The study aimed at examining how different reline resins affect flexural strength and flexural modulus of denture base. A total of 80 specimens ($64{\times}10{\times}3.3$ mm, according to ISO 1567:1999) of heat-polymerized resin, 40 specimens for (Lucitone199(Dentsply Int., NewYork, USA), SR Ivocap(Ivoclar AG, Schaan, Liechtenstein)) respectively, were polymerized according to the manufacturer's instructions and divided into eight groups(n = 10). Control group specimens remained intact. Specimens in the other groups were abraded on both sides to 2 mm thickness, and were relined in 1.3 mm thickness with 3 types of resins (Lucitone199(Dentsply), SR Ivocap(Ivoclar), and Rebase II(Tokuyama Co., Ltd, Tokyo, Japan)). All specimens were preserved in distilled water at $37^{\circ}C$ for 50 hours, and then were subjected to flexural strength testing in a universal testing machine using 3-point loading. A crosshead speed of 5 mm/min was used, and the distance between the supports was 50 mm. Data analyses included one-way analysis of variance(ANOVA) and the Tukey Honestly Significant Difference test (p=.05). Both heat-polymerized resin groups and auto-polymerized resin groups showed statistically low flexural strength and flexural modulus than control groups. Specimens relined with Lucitone 199 showed significantly higher flexural strength and flexural modulus than those relined with SR-Ivocap. Specimens relined with auto-polymerized resin showed significantly lower flexural strength and flexural modulus than those relined with heat-polymerized resin. Relining with heat-polymerized resins showed superior mechanical properties to relining with an auto-polymerized resin. Relining with the same heat-polymerized resin as the denture base does not affect mechanical properties of a denture. Lucitone199 using a compression-mould technique resulted in the highest flexural strength.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.995-1003
• /
• 2016

Ulmus pumila L. bark underwent distilled water extraction under three temperature condition ($4^{\circ}C$, room temperature, or $80^{\circ}C$) and two extraction times (1, or 5 min) in order to develop a functional beverage products. Changes in yield, pH, color, total phenolic (TP) content, tannin content and antioxidant activity of the aqueous extracts were evaluated for each extraction temperature and duration. Extraction conditions did not affect yield or pH value of the extracts; however CIE $b^*$ values were high in extracts prepared under high extraction temperature ($80^{\circ}C$) and long extraction duration (5 min) conditions. Both extraction temperature and duration affected the TP and tannin contents of the extracts; however, all extraction conditions resulted in ${\geq}450\;mg\;GAE/g$ TP content and ${\geq}80\;mg\;CE/g$ tannin content. All extracts exhibited ABTS and DPPH radical scavenging ability similar to that of vitamin C. Nitric oxide inhibition activity was lower in the 5 min duration sample than in the 1 min sample. The $4^{\circ}C$ extraction temperature produced an extract with the highest reducing power and hydrogen peroxide values. Extraction temperature also affected sensory evaluation results with the $80^{\circ}C$ extraction temperature producing significantly higher flavor, bitterness, and color score, than those obtained under $4^{\circ}C$ and room temperature extraction conditions.