• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권8호
• /
• pp.2298-2315
• /
• 2024

This paper introduces a method aimed at diagnosing the presence or absence of lesions by detecting anomalies in Chest X-ray images. The proposed approach is based on the PatchCore anomaly detection method, which extracts a feature vector containing location information of an image patch from normal image data and calculates the anomaly distance from the normal vector. However, applying PatchCore directly to medical image processing presents challenges due to the possibility of diseases occurring only in specific organs and the presence of image noise unrelated to lesions. In this study, we present an image alignment method that utilizes affine transformation parameter prediction to standardize already captured X-ray images into a specific composition. Additionally, we introduce a region-specific abnormality detection method that requires affine-transformed chest X-ray images. Furthermore, we propose a method to enhance application efficiency and performance through feature map hard masking. The experimental results demonstrate that our proposed approach achieved a maximum AUROC (Area Under the Receiver Operating Characteristic) of 0.774. Compared to a previous study conducted on the same dataset, our method shows a 6.9% higher performance and improved accuracy.

• 한국패류학회지
• /
• 제31권4호
• /
• pp.257-262
• /
• 2015

The seven selected primers BION-13, BION-29, BION-61, BION-64, BION-68, BION-72 and BION-80 generated the total number of loci, average number of loci per lane and specific loci in Meretrix lusoria (ML), Saxidomus purpuratus (SP) and Cyclina sinensis (CS) species. Here, the complexity of the banding patterns varied dramatically between the primers from the three venerid clam species. The higher fragment sizes (> 1,000 bp) are much more observed in the SP species. The primer BION-68 generated 21 unique loci to each species, which were ascertaining each species, approximately 150 bp, 300 bp and 450 bp, in the ML species. Remarkably, the primer BION-80 detected 7 shared loci by the three clam species, major and/or minor fragments of sizes 500 bp, which were matching in all samples. As regards average bandsharing value (BS) results, individuals from CS clam species (0.754) exhibited higher bandsharing values than did individuals from SP clam species (0.607) (P < 0.05). In this study, the dendrogram obtained by the seven oligonucleotides primers indicates three genetic clusters: cluster 1 (LUSORIA01-LUSORIA07), cluster 2 (PURPURATUS08-PURPURATUS14), cluster 3 (SINENSIS15-SINENSIS21). Among the twenty one venerid clams, the shortest genetic distance that displayed significant molecular differences was between individuals 18 and 20 from the CS species (genetic distance = 0.071), while the longest genetic distance among the twenty-one individuals that displayed significant molecular differences was between individuals LUSORIA no. 02 and PURPURATUS no. 09 (genetic distance = 0.778). Relatively, individuals of SP venerid species were appropriately closely related to that of CS species, as shown in the hierarchical dendrogram of genetic distances. Eventually, PCR fragments exposed in the present study may be worthwhile as a DNA marker the three venerid clam species to discriminate.

• 화약ㆍ발파
• /
• 제8권1호
• /
• pp.3-16
• /
• 1990

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill $\varphi{70mm}$ on the calcalious sand stone(sort-moderate-semi hard Rock). The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites (m) W : Maximum Charge per delay-period of eighit milliseconds or more(Kg) K : Ground transmission constant, empirically determind on th Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity $D/W^b$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m----under l00m----- $V=41(D/3\sqrt{W})^{-1.41}$ -----A Over l00m-----$V= 121(D/3\sqrt{W})^{-1.66}$-----B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 한국정보통신학회논문지
• /
• 제17권2호
• /
• pp.473-480
• /
• 2013

본 논문은 개선된 삼변측량법을 이용하여 위치인지에 대한 정확도를 향상시킨 위치인지 알고리즘을 개발하였다. 개발한 위치인지 알고리즘은 첫째, 측정된 신호세기를 기반으로 노드와의 거리를 계산한다. 특정한 위치에 노드를 배치한 후 노드와의 거리 측정시 오차가 발생했다는 가정 하에 설계하였다. 노드(수신기, 중계기)들로 부터 거리데이터가 전송되면 구역에 따라 위치 계산에 쓰일 인접한 노드를 선택한다. 위치계산은 두 원을 그룹으로 생성한 후 두 교점을 이용해서 사각형 영역 안의 네점의 위치를 구한다. 둘째, 구역 필터링 알고리즘 적용하였다. 노드들이 구성하는 4개의 구역이 있다고 가정하고, 한 구역은 6개의 위치인지 좌표를 담당하게 하였다. RF의 특성상 실제 거리가 멀수록 신호세기에 의한 거리 오차는 커지게 되어있다. 이를 구역 필터링을 통하여 1차 필터링을 하고 2차적으로 개선된 알고리즘을 적용하여 위치인지 오차를 최소화하였다.

• 기술사
• /
• 제24권6호
• /
• pp.97-105
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ø70mm on the calcalious sand stone (soft-moderate-semi hard Rock). The total numbers of fire blast were 88 round. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagation Law in Blasting Vibration (Equation omitted) where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum Charge per delay-period of eighit milliseconds o. more(kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D / W$^n$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over 100m distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30 ‥‥‥under 100m ‥‥‥V=41(D/$^3$√W)$\^$-1.41/ ‥‥‥A Over 100 ‥‥‥‥under 100m ‥‥‥V=121(D/$^3$√W)$\^$-1.56/ ‥‥‥B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 컴퓨터교육학회논문지
• /
• 제7권5호
• /
• pp.33-43
• /
• 2004

원격교육에서는 교수(敎授, teaching)와 학습(學習, learning)이 컴퓨터와 인터넷을 통해서 이루어지기 때문에 교수자(敎授者)와 학습자(學習者)가 만족할 수 있는 교수-학습방법이 제공되어야 한다. 그러나 기존의 WBI 시스템은 저비용으로 개발이 용이한 텍스트위주의 원격교육용 교재 개발에 치중하고 있다. 의상디자인 교과는 이론교육 뿐만 아니라 직접 실습해보며 익히는 실기교육이 필수적으로 요구된다. 이러한 실기교육을 위해서는 일반적인 텍스트 위주의 교수-학습이론이나 방법은 물론 디자인 전 과정에서 교수자와의 상호작용을 통한 피드백이 이루어지는 교수-학습 방법이 필요하다. 본 연구는 실기교과의 교수-학습방법이 효과적으로 내재된 웹기반 의상디자인 원격 교육시스템을 설계, 제안하고, 패션일러스트레이션 교과목을 중심으로 구현된 사례 시스템을 제시하였다. 또한 선별된 실험집단의 평가를 통하여 학습 효과를 규명하고 의상디자인 교육의 원격교육 가능성과 유용성을 확인하였다.

• 화약ㆍ발파
• /
• 제9권4호
• /
• pp.3-12
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M /S delay caps. Drill depth was from 3m to 6m with Crawler Drill 70mm on the calcalious sand stone (soft-moderate-semi hard Rock) . The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to Propagation Law in blasting vibration as follows .Propagtion Law in Blasting Vibration V=k(D/W/sup b/)/sup n/ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W ; Maximum Charge per delay -period of eight milliseconds or more(Kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D/W/sup b/ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three groups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is varified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m--under 100m----V=41(D/ W)/sup -1.41/-----A Over l00m---------V=121(D/ W)/sup -1.56/-----B K value on the above equation has to be more specified for furthur understand about the effect of explosives. Rock strength, And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2000-2006
• /
• 2011

Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. Where calculation method of protection settings and Logic for Protection of Generator Asynchronization will be recommended, A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection this paper describes an improved backup protection coordination scheme using a new Logic that will be suggested.

• Asia Marketing Journal
• /
• 제17권1호
• /
• pp.97-121
• /
• 2015

In this research, we examine whether and why temporal distance influences evaluations of two different types of brand extensions: concept-based extensions, defined as extensions primarily based on the importance or relevance of brand concepts to extension products; and similarity-based extensions, defined as extensions primarily based on the amount of feature similarity at the product-category level. In Study 1, we test the hypothesis that concept-based extensions are evaluated more favorably when they are framed to launch in the distant rather than in the near future, whereas similaritybased extensions are evaluated more favorably when they are framed to launch in the near rather than in the distant future. In Study 2, we confirm that this time-dependent differential evaluation is driven by the difference in construal level between the bases of the two types of extensions - i.e., brand-concept consistency and product-category feature similarity. As such, we find that conceptbased extensions are evaluated more favorably under the abstract than concrete mindset, whereas similarity-based extensions are evaluated more favorably under the concrete than abstract mindset. In Study 3, we extend to the case for a broad brand (i.e., brands that market products across multiple categories), finding that making accessible a specific product category of a broad parent brand influences evaluations of near-future, but not distant-future, brand extensions. Combined together, our findings suggest that temporal distance influences brand extension evaluation through its effect on the importance placed on brand concepts and feature similarity. That is, consumers rely on different bases to evaluate brand extensions, depending on their perception of when the extensions take place and on under what mindset they are placed. This research makes theoretical contributions to the brand extension research by identifying one important determinant to brand extension evaluation and also uncovering its underlying dynamics. It also contributes to expanding the scope of the construal level theory by putting forth a novel interpretation of two bases of perceived fit in terms of construal level. Marketers who are about to launch and advertise brand extensions may benefit by considering temporal-distance information in determining what content to deliver about extensions in their communication efforts. Conceptual relation of a parent brand to extensions needs to be emphasized in the distant future, whereas feature similarity should be highlighted in the near future.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.680-685
• /
• 2005

Multi-walled carbon nanotubes were purified by using the nitric acid after the mechanical cutting, which carboxylic group might be introduced into the surface of nanotubes. To enhance the dispersion of CNTs, carboxylic groups were substituted in the reaction with octadecyl amine containing a long alkyl group. Nanofibers were manufactured by electrospinning, the solution that mixed with PMMA and ODA-fuctionalized CNTs in dimethyl formamide and dispersed with ultrasonication. Diameter and alignment of nanofibers with various electrospinning parameters, such as the CNT and PMMA concentration in solution, the applied voltage, and the distance to the collector were investigated. As a result, the nanofiber diameter was increased with the increment of PMMA concentration, whereas it was reduced as the applied voltage and the spinning distance was increased. The spinning area became smaller with the distance. The nanofibers were formed without the defect on surface and well aligned in a specific concentration of PMMA and nanotubes.