• 대한물리의학회지
• /
• 제3권3호
• /
• pp.169-176
• /
• 2008

Purpose : Tandem stance is a clinical measure of standing balance considered to assess postural steadiness in a heel-to-toe position by a temporal measurement. The aim of this study is to investigate postural steadiness and to explore the weight distribution between legs during 25s of quiet stance and tandem stance(right foot was leading) in healthy young adults. Methods : 107 healthy young adults(mean age 21.1 years) are participated. Weight distribution beneath both feet and sway distance were recorded while the subjects performed 25s of quiet stance and tandem stance. Results : Subjects placed more weight on the rear leg in tandem stance and on the left foot in quiet stance. So, quiet stance and tandem stance is not a task for equal weight bearing. Subjects show larger sway distance in anteroposterior direction of tandem stance than quiet stance. Conclusion : The results of this study will be useful to researchers and clinicians using tandem stance measures to evaluate postural steadiness and to predict fall. The results suggest that tandem stance is useful to treat of weight distribution and to improve of balace in elderly adults and stroke patients.

• 한국작물학회지
• /
• 제53권1호
• /
• pp.64-69
• /
• 2008

콩의 용도는 메주나 장류 또는 두부로 이용하는 장류콩, 나물로 이용하는 나물콩, 혼반용으로 이용할 수 있는 밥밑용으로 이용되어 왔으나, 최근에는 콩을 채소처럼 먹을 수 있는 풋콩에 대한 관심이 증대되고 있는 실정이다. 따라서 본 시험은 풋콩재배에 기초 자료를 제공하기 위하여 검정용 및 갈색콩 품종들의 풋콩재배시 가지풋콩의 상품성을 향상시키면서 풋콩수량을 증대시킬 수 있는 적정재식거리 구명을 위한 실험으로 그 결과를 요약하면 다음과 같다. 1. 재식거리는 파종으로부터 개화까지의 소요일수, 수확까지의 소요일수 및 도복에 영향을 주지 않았다. 2. 경장은 밀식할수록 증가한 반면 협수, 분지수, 개체당 협수, 분지당 협수, 경협중 및 2+3립협의 비율은 밀식할수록 감소하였다. 3. 풋콩의 크기는 재식밀도간 유의적인 차이는 없었으나, 풋콩의 수확지수는 밀식할수록 낮았다. 4. 밀식을 하면 풋콩의 수량은 증대하지만 경협중, 분지 당 협수 및 2+3립협의 풋콩수량을 고려한 가지풋콩으로의 상품성을 고려할 때 적정재식밀도는 선흑콩과 일품검정콩은 $60{\times}25\;cm$, 갈미콩은 $60{\times}35\;cm$이었다.

• Nuclear Engineering and Technology
• /
• 제37권4호
• /
• pp.375-384
• /
• 2005

To investigate the flow-accelerated corrosion (FAC) dependency of carbon steel (A106 Gr. B) and low-alloy steels (1Cr-1/2Mo, 21/4Cr-1Mo) on pH, orifice distance, and material, experiments were carried out. These experiments were performed using a flow velocity of 4 m/sec (partly 9 m/sec) at pH $8.0\~10.0$ in an oxygen-free aqueous solution re-circulated in an Erosion-Corrosion Test Loop at $130^{\circ}\;{\ldots}$ for 500 hours. The weight loss of the carbon steel specimens appeared to be positively dependent on the flow velocity. That of the carbon and low-alloy steel specimens also showed to be distinguishably dependent on the pH. At pH levels of $8.0\~9.5$ it decreased, but increased from 9.5 to 10.0. Utility water chemistry personnel should carefully consider this kind of pH dependency to control the water system pH to mitigate FAC of the piping system material. The weight loss of the specimens located further from the orifice in the distance range of $6.8\~27.2$ mm was shown to be greater, except for 21/4Cr-1Mo, which showed no orifice distance dependency. Low alloy steel specimens exhibited a factor of two times better resistance to FAC than that of the carbon steel. Based on this kind of FAC dependency of the carbon and low-alloy steels on the orifice distance and material, we conclude that it is necessary to alternate the composition of the secondary piping system material of NPPs, using low-alloy steels, such as 21/4Cr-1Mo, particularly when the system piping has to be replaced.

• 화약ㆍ발파
• /
• 제24권2호
• /
• pp.33-39
• /
• 2006

국내에서는 주로 환산거리방식에 의한 발파진동 예측 방법이 주로 사용되고 있다. 환산거리 방식에서 중요한 변수인 지발당 장약량은 인접 단차간에 진동의 영향이 없는 단차로서 통상적으로 8ms을 기준으로 한다. 본 연구에서는 8ms 기준의 기원과 문제점을 문헌고찰을 통해 제시하고 인접단차 간에 진동의 영향이 없는 단차로 각 학자 별로 제시된 8ms, 17ms, 25ms 단차를 Langefors의 2.5T 기준으로 고찰하였다.

• 산업융합연구
• /
• 제1권2호
• /
• pp.17-31
• /
• 2003

Many risk factors with the onset of Low Back Pain(LBP) have been identified, however, lifting out of Manual Material Handling(MMH) was the most important factor to the LBP. Injuries due to lifting took account for 34.0%(227,291) out of the total overexertion in MMH(668,084). The weight, vertical location, twist angle, lifting frequency, and lifting posture were reviewed in this study. Technical information for using the revised lifting equation to evaluate a variety of two - handled manual material handling tasks was suggested. To measure worker's fatigue in lifting task, Lifting Index Simulator(LIS) was create under the revised NIOSH(National Institute for Occupational Safety and Health) lifting equation. For the implementation of the LIS, data was collected in A company manufactures various paints in Si-Wha industrial complex, Kyunggi-Do. The results of the Lifting Index(LI) were analyzed by MANOVA to find the relation with lifting variables collected. It was found that horizontal distance, vertical distance, travelling distance and frequency were significant at the 0.01 level and weight was significant at the 0.05 level. The purpose of this paper is to reduce the chronical low back pain for the manual material handlers.

• 호남수학학술지
• /
• 제30권1호
• /
• pp.33-45
• /
• 2008

Lee weight is more appropriate for some practical situations than Hamming weight as it takes into account magnitude of each digit of the word. In this paper, we obtain a sufficient condition over the number of parity check digits for codes correcting random errors and simultaneously detecting burst errors with Lee weight consideration.

• 대한통합의학회지
• /
• 제1권1호
• /
• pp.33-43
• /
• 2013

Purpose : The study was designed to identify the change of body alignment according to surface during walking with backpack. Methods : Healthy twenty people(10 men & 10 women) participated in this study. The exclusion criteria were orthopedic and neurologic disease. Initial alignment measurements were performed. Results were evaluated by angle and range from earlobe to acromion, acromion to malleolus and earlobe to malleolus in the GPS system. Results : On the hard surface, the distance and angle from malleolus to earlobe increased after walking with backpack which is 20 % of weight(p<.05). In addition the distance from malleolus to acromion and the angle from earlobe to acromion increased(p<.05). On the soft surface, on the other hand, the distance and angle from malleolus to earlobe decreased after walking with backpack which is 20 % of weight(p<.05). There was no relationship between the change of the surface and the body's alignment(p>.05). Conclusion : Consequently, the body alignment was changed by backpack which is 20 % of weight, but body alignment wasn't changed by the surface. So more study need to be surveyed regard of this.

• 드라이브 ㆍ 컨트롤
• /
• 제21권1호
• /
• pp.46-52
• /
• 2024

The advancement of autonomous driving technology has heightened the importance of Autonomous Mobile Robotics (AMR) within smart factories. Notably, in tasks involving the transportation of heavy objects, the consideration of weight in route optimization and path planning has become crucial. There is ongoing research on local path planning, such as Dijkstra, A^*, and RRT^*, focusing on minimizing travel time and distance within smart factory warehouses. Additionally, there are ongoing simultaneous studies on route optimization, including TSP algorithms for various path explorations and on minimizing energy consumption in mobile robotics operations. However, previous studies have often overlooked the weight of the objects being transported, emphasizing only minimal travel time or distance. Therefore, this research proposes route planning that accounts for the maximum payload capacity of mobile robotics and offers load-optimized path planning for multi-destination transportation. Considering the load, a genetic algorithm with the objectives of minimizing both travel time and distance, as well as energy consumption is employed. This approach is expected to enhance the efficiency of mobility within smart factories.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1987년도 학술발표회 논문집
• /
• pp.89-92
• /
• 1987

In a template-matchig-based speech recognition syste, excessive weight given to perceptually unimportant spectral variations is undesirable for discriminating among acoustically similar words. By introducing a simple threshold-type nonlinearity applied to the distance metric, the word recognition performance can be improved for a vocabulary with similar sounding words, without modifying the system structure.

• Physical Therapy Rehabilitation Science
• /
• 제6권4호
• /
• pp.189-195
• /
• 2017

Objective: The purpose of this study was to examine the effects of real-time visual feedback weight shift training during golf swinging on golf performance. Design: Repeated-measures crossover design. Methods: Twenty-sixth amateur golfers were enrolled and randomly divided into two groups: The golf swing training with real-time feedback on weight shift (experimental group) swing training on the Wii balance board (WBB) by viewing the center of pressure (COP) trajectory on the WBB. All participants were assigned to the experimental group and the control group. The general golf swing training group (control group) performed on the ground. The golf performance was measured using a high-speed 3-dimensional camera sensor which analyses the shot distance, ball velocity, vertical launch angle, horizontal launch angle, back spin velocity and side spin velocity. The COP trajectory was assessed during 10 practice sessions and the mean was used. The golf performance measurement was repeated three times and its mean value was used. The assessment and training were performed at 24-hour intervals. Results: After training sessions, the change in shot distance, ball velocity, and horizontal launch angle pre- and post-training were significantly different when using the driver and iron clubs in the experimental group (p<0.05). The interaction time${\times}$group and time${\times}$club were not significant for all variables. Conclusions: In this study, real-time feedback training using real-time feedback on weight shifting improves golf shot distance and accuracy, which will be effective in increasing golf performance. In addition, it can be used as an index for golf player ability.