• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.203-213
• /
• 2023

In medical ultrasound imaging systems, Side lobes may appear if signals outside the imaging point are not completely removed during receive focusing. If the time signal of the side lobe overlaps with the time signal (main lobe) from the image point, it is difficult to completely remove it using filter processing in the time domain. However, In the receive focusing process, when time-channel signals are Fourier-transformed, the main lobe and side lobe signals are spatially separated in the spectral domain. Therefore, the side lobes can be suppressed by multiplying the image with magnitude weights, which are determined by the magnitudes of the main and side lobes calculated in the spectral domain. In addition, when the main lobe and the side lobe spectrum are adjacent, the distance weight was applied based on the distance between them. In a 5 MHz ultrasound imaging system using a 64-channel linear transducer, point reflector and speckle images with cysts of various brightness were synthesized and weights were applied to the ultrasound image. Using computer simulations, we confirmed that the side lobes were greatly reduced without affecting the spatial resolution in the point reflector image, and the contrast was significantly improved in the cyst image with computer simulations.

• Tuberculosis and Respiratory Diseases
• /
• v.76 no.6
• /
• pp.269-275
• /
• 2014

Background: The six-minute walk test has been widely used in people with chronic cardiopulmonary disorders as an outcome assessment with regards to therapeutic or prognostic determinants. This study was undertaken to determine the six-minute walk distance (6MWD) in a sample of healthy Koreans and to create a reference equation. We also compared the 6MWD of our cohort with previously published equations. Methods: Two hundred fifty-nine healthy subjects (95 males) aged 22-59 years performed two walking tests using a standardized protocol. 6MWD was defined as the greatest distance achieved from the two tests. The effect of anthropometrics on the 6MWD was also investigated. Results: The average 6MWD was $598.5{\pm}57.92m$, with significantly longer distances by males ($628.9{\pm}59.51m$) than females ($580.9{\pm}47.80m$) (p<0.001). Age, height, weight, and body mass index were significantly correlated with 6MWD in univariate analysis. Stepwise multiple regression showed height to be single independent predictor of 6MWD ($r^2$=0.205, p<0.001). The reference equations derived in Caucasian and North African populations tend to overestimate the distance walked by Korean subjects, while Asian equations underestimate it. Conclusion: The average 6MWD in these Korean populations was 600 m. The regression equation revealed that individual's height was the most significant predictor of distance, explaining 20.5% of the distance variance.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.1
• /
• pp.35-42
• /
• 2010

Purpose : This study investigated to find the therapeutical effects of functional weight bearing exercise on the balance and gait in stroke. Methods : The subjects of this study were 13 hemiplegia was exercised using functional weight support exercise for 5 weeks, all of whom agreed to participate in the study. All subjects were measured to see their balance and gait with a Pro-3 balance system and Gait analysis. In order to assure the statistical significance of the results, we used for SPSS 12.0 for windows. Results : The results of this study were as follows : 1) There were statistically significant difference in medial-lateral stability and overall stability index. 2) There were statistically significant in distance and gait velocity index. Conclusion : According the results of this study, functional weight bearing exercise is effect on the balance and gait for hemiplegia.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.716-723
• /
• 2019

Fingerprint matching accuracy is essential in deploying a music search service. This paper deals with a method to improve fingerprint matching accuracy by utilizing an auxiliary information which is called power weight. Power weight is an expected robustness of each hash bit. While the previous power mask binarizes the expected robustness into strong and weak bits, the proposed method utilizes a real-valued function of the expected robustness as weights for fingerprint matching. As a countermeasure to the increased storage cost, we propose a compression method for the power weight which has strong temporal correlation. Experiments on the publicly-available music datasets confirmed that the proposed power weight is effective in improving fingerprint matching performance.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.427-434
• /
• 2017

This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting distance and sowing date. The object of this experiment is to get basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another object was to evaluate optimum planting distance and sowing date in central district area. Total number of tillers was more in 80 cm ridge than 60 cm ridge and it was increased as the planting distance was wider from 15 cm to 30 cm on the each ridge. Ratio of effective tillers was higher in 60 cm ridge than 80 cm ridge and it was decreased as planting distance was wider from 15 cm to 30 cm. The lower the planting distance, the more increased total number of tillers, whereas effective tillers was decreased as planting distance was high. Average of total number of tillers of three varieties was higher in sowing date of May 2 (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of May 23 (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting distance and days to heading and ripening date from seeding. Culm length increased as planting distance was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting distance among 6 planting distances.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.165-179
• /
• 1991

This study was performed to understand the irradiation effects on the mandibular condyle and mandibular growth in developing white rats. Forty eight white male rats of the Sprague-Dawley strain aged 4 weeks, were devided into two groups; control group and experimental group. A single target dose of l0Gy of radiation was given to the mandibular condylar area and the observations of the photo analysis, radiologic, histopathologic and immunohistochemical study revealed as follows; 1. Animals killed one week after irradiation showed lesser increase in body weights, no difference in photo analysis and decreased thickness of cartilagenous layers of the condyle than the control group. 2. Two weeks after irradiation the weight increases were almost same in both irradiated and control groups and in photo analysis, the distance from Mental Foramen to Incisal tip (Mf-It) was longer than the controls. Repair processes were taken place in irradiated group, but the cartilagenous layers were thinner than the controls. 3. By the third week after exposure further repair was seen in the trabeculae and the distance from Condylion to Mandibular plane (Cd-Cd') was longer than the controls and the weight increases were almost same as the controls. 4. At 4 weeks after irradiation the cells of proliferating zone repaired to almost normal findings, but the cartilagenous cell layers were still thinner than the control animals. In photo analysis, the distances from Menton to Anterior Notch (Me-An), from First Molar to Mandibular plane (Fm-Fm') were shorter and the weight increases were lesser than the controls. 5. In the S-100 antibody, the positive cells were increased in number, but decreased reactivities were seen at the proliferating zone of the irradiated groups. In the Monoclonal Anti-Proteoglycan antibody and Type Ⅰ collagen antibody, the irradiated groups showed little decreased number of positive cells and in the Type Ⅱ collagen antibody, the differences between irradiated and control groups were undetectable in immunohistochemical study.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.203-209
• /
• 1999

In this study, the structural deflection analysis of robot manipulator for removing nuclear fuel rod from nuclear reactor vessel is performed by using general purpose finite element code (ANSYS). The structural deflection analysis results reported in this study is very required for the accurate design of robot system. The structural deflection analysis for the manipulator's structural status at which the gripper grasps and draws up the nuclear fuel rod is done, For this beginning structural status of robot manipulator's removing motion, the reaction forces at each joint have static maximum values as reported in the reference(6), and so these forces may cause the maximum deflection of robot structure. The structural deflection analysis is performed for selected four working cases of the proposed structural model and results on deformation, stress for the manipulator's solid body and the deflection at the end of robot manipulator's gripper are calculated. And further, the same analysis is performed for the slenderer manipulator with cross section reduced by one-fifth of each side length of proposed model. The analysis is performed not only for the nuclear fuel rod with weight load of 300kg but also for nuclear fuel rods with weight loads of 100kg, 200kg, 400kg and 500kg. The static structural deflection analysis results show that the deflection value increases as the load increases and the largest value (corresponding to the weight load of 500kg in case 1) is much smaller than the gap distance between nuclear fuel rods. but the largest value for the slenderer manipulator is almost as large as the gap distance, Hence, conclusively, the proposed manipulator's structural model is acceptably safe for mechanical design of robot system.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.155-161
• /
• 2014

The objective of this study is to weight analysis portable backpack system of infantry weapon systems for ergonomic design in manual materials handling tasks. For the product design, we analyzed the ergonomic guidelines and status of similar weapon systems by comparing the efficient operation performance provide for the basic data. Result of this study, the relationship between portability and mobility presented for schematic. In the short distance of the short biomechanical criterion, 1-2 hours in the middle of moving psychophysical criterion, 4 hour or more long-distance criterion applied for the physiological criterion for easy of trade-offs that need to be considered. This study suggests for 4 research items for infantry backpack system in manual materials handling tasks. Throughout the result of anthropometric populations, the 5%tile body weight for -0.91kg but 95%tile in 34.17kg considered to be margin for free, easy and efficient operation for the weight margin between portability and mobility in manual materials handling tasks.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.251-262
• /
• 2014

It has been considered that factors affecting accuracy of the estimated weight of moving vehicle by BWIM system are vehicle and bridge characteristics, and measurement conditions which is related to the strain curve. In this study, theoretical review and field test were performed to evaluate effect of these factors in BWIM system. From these evaluations, we proposed a way to improve accuracy of the estimated vehicle information in BWIM system. As the results, it was known that girder type and continuity of spans in bridge are not governing factor, but its plane shape gives large influence on accuracy of the estimated vehicle information. In addition, running speed of vehicle has also large effect on the estimated accuracy of axle distance if the distance between second and third axles is short. However, weight sum of the two axles can be estimated reasonably by assuming them as one axle.

• Explosives and Blasting
• /
• v.20 no.2
• /
• pp.21-31
• /
• 2002

We did bench blasting upon the natural rock which it's uniaxial compressive strength was about $1,420~1,476kgf/\textrm{cm}^2$. This is the results we inferred after measuring, analyzing the ground vibration velocity of the front and back direction from the free face of the bench blasting. We have to induce the square and cube root scaled equation and the general equation to guarantee confidence upon the data when analyzing the measurement data of the test blasting. The variable distance is in reverse proportion to the permitted ground vibration velocity. The shorter is the exploding point to a protection structure, the bigger is the reflection that the direction of the free face experts the ground vibration velocity, The ground vibration velocity front of the free face tends become reduced about 38~46% compare with back of the free face in the range that the permitted ground vibration velocity is 2.0~5.0mm/sec. In case of 2.0mm/sec, when a protection structure is within about 95m, the max. allowable charge weight per delay on positing front of the free face can be more used about 2.61 times than that on positing back of the free face, in case of 3.0mm/sec within about 78m more about 2.38 times, in case of 5.0mm/sec within 60m more about 2.10 times. In case of 2.0~5.0mm/sec when a protection structure is within about 200m front from the free face, the max. allowable charge weight per delay can become about 1.52 times than the case on back to the free face.