• Korean Journal of Organic Agriculture
• /
• v.29 no.1
• /
• pp.75-84
• /
• 2021

Shrub growth and fruit characteristics and working time of 'Duke' blueberry by shrub distance were investigated. Overapping rate of blueberry crown was 109% in 0.6 m shrub distance, 37% in 1.2 m shrub distance, and -88% in 2.4 m shrub distance, respectively. The number of main stem tended to increase as the shrub spacing widened. The other fruit characteristics, except for the fruit weight, did not show any significantly different according to the shrub distance. The yield per 10 a was 2,097 kg for 0.6 m shrub distance, 1,303 kg for 1.2 m shrub distance, and 710.7 kg for 2.4 m shrub distance in 2019, respectively. Total working time was 154 hr for 0.6 m shrub distance, 114 hr for 1.2 m shrub distance, and 74 hr for 2.4 m shrub distance. Therefore, the blueberry shrub distance was judged to be appropriate about 1.2 m in the long-termly. However, in order to increase yield early and income, the shrub can maintain 0.6 m distance during young shrub, it can managed flexibly to 1.2 m distance when it becomes a mature shrub.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.605-611
• /
• 2019

The purpose of this study is to manufacture a multi-function device (MFD) which can be applied to various types of weight-bearing view of the lower leg, and to compare the results with the images from the existing weight-bearing platforms (WBPs), thereby suggesting a clinical utilization. The MFD was manufactured, by considering the minimum adjustable heights of the platform for weight-bearing foot/ankle, platform for hindfoot alignment view, and X-ray tube of the X-ray device. A foot/ankle phantom was used to take the images of weight-bearing lateral foot in MFD and WBPs to compare the resolutions of the X-ray images using a quick modulation transfer function (MTF) program. Between both the images taken from the MFD and WBPs, there was no statistically significant difference found in the mean cycles per pixel (C/P) and the lines per image height (LPH) of the 50%-Contrast Spatial Frequency (MTF50), and 10-90% of Maximum Energy Rise Distance (10-90%), where p>0.05. The MFD is suggested for its clinical trial as a useful positioning device that can secure the patient's safety and manifoldly perform various inspections. Also, the recommendation of the positioning device as a policy can activate dedicated manufacturers, while also improving the quality of medical services.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.5
• /
• pp.628-634
• /
• 2014

Data on age and body weight at breeding, parity, previous litter size, days open and some descriptive body linear traits from 389 meat-type, prolific Black Bengal goats in Tripura State of India, were collected for 3 and 1/2 years (2007 to 2010) and analyzed using logistic regression model. The objectives of the study were i) to evaluate the effect of age and body weight at breeding, parity, previous litter size and days open on litter size of does; and ii) to investigate if body linear type traits influenced litter size in meat-type, prolific goats. The incidence of 68.39% multiple births with a prolificacy rate of 175.07% was recorded. Higher age (>2.69 year), higher parity order (>2.31), more body weight at breeding (>20.5 kg) and larger previous litter size (>1.65) showed an increase likelihood of multiple litter size when compared to single litter size. There was a strong, positive relationship between litter size and various body linear type traits like neck length (>22.78 cm), body length (>54.86 cm), withers height (>48.85 cm), croup height (>50.67 cm), distance between tuber coxae bones (>11.38 cm) and distance between tuber ischii bones (>4.56 cm) for discriminating the goats bearing multiple fetuses from those bearing a single fetus.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2002.02a
• /
• pp.166-176
• /
• 2002

A homonym could be disambiguated by another words in the context as nouns, predicates used with the homonym. This paper using semantic information (co-occurrence data) obtained from definitions of part of speech (POS) tagged UMRD-S$^1$), In this research, we have analyzed the result of an experiment on a homonym disambiguation system based on statistical model, to which Bayes'theorem is applied, and suggested a model established of the weight of sense rate and the weight of distance to the adjacent words to improve the accuracy. The result of applying the homonym disambiguation system using semantic information to disambiguating homonyms appearing on the dictionary definition sentences showed average accuracy of 98.32% with regard to the most frequent 200 homonyms. We selected 49 (31 substantives and 18 predicates) out of the 200 homonyms that were used in the experiment, and performed an experiment on 50,703 sentences extracted from Sejong Project tagged corpus (i.e. a corpus of morphologically analyzed words) of 3.5 million words that includes one of the 49 homonyms. The result of experimenting by assigning the weight of sense rate(prior probability) and the weight of distance concerning the 5 words at the front/behind the homonym to be disambiguated showed better accuracy than disambiguation systems based on existing statistical models by 2.93%,

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.291-298
• /
• 2012

In automatic target recognition(ATR) systems, target extraction techniques are very important because ATR performance depends on segmentation result. So, this paper proposes a multi-sensor image fusion method based on adaptive weights. To incorporate the FLIR image and CCD image, we used information such as the bi-modality, distance and texture. A weight of the FLIR image is derived from the bi-modality and distance measure. For the weight of CCD image, the information that the target's texture is more uniform than the background region is used. The proposed algorithm is applied to many images and its performance is compared with the segmentation result using the single image. Experimental results show that the proposed method has the accurate extraction performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.545-551
• /
• 2016

In this study, we evaluate the braking performance of an urban railway vehicle to verify its basic safety condition. The braking performance evaluation methods, deceleration measurement and braked weight percentage, were compared for trains with different numbers of cars, in order to assess the advantages of each method and their compatibility. With a probabilistic braking model, the effect of the adhesion coefficient distribution was analyzed in accordance with the train composition. A train with many cars has a narrower deceleration distribution width than one with few cars. The braked weight percentage method is expected to be useful in the design of train signal systems, because it allows the braking distance to be calculated for various initial brake velocities. The deceleration distribution model and its results are expected to be useful as a basis for precise train signal design.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.153-159
• /
• 2005

The purpose of this study was to assess the ergonomic risks of lifting tasks in a marine diesel engine manufacturing industry using the National Institute for Occupational Safety and Health(NIOSH) Revised Lifting Equation(NLE). Average Lifting Index(LI=Weight of Load/Recommended Weight Limit) of a total number of 45 lifting tasks was $1.6{\pm}0.7$. The LIs were above 1 at 34 tasks(75.6%), and above 2 at 11 tasks(24.4%). Parts management showed the highest average LI value (LI=2.3) in all departments, which resulted from high frequency and heave load of lifting. The common and significant ergonomic risk factors in the processes were the heavy weight of diesel engine parts and the long horizontal distance. In addition, some lifting tasks had such potential risk factors as the long vertical distance, the high frequency of lifts or the long work duration.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.4
• /
• pp.17-24
• /
• 2023

In computer graphics and computer vision research and its applications, various representations of 3D objects, such as point clouds, voxels, or triangular meshes, are used depending on the purpose. The need for animating characters using these representations is also growing. In a typical animation pipeline called skeletal animation, "skinning weight painting" is required to determine how joints influence a vertex on the character's skin. In this paper, we introduce a neural network for automatically performing skinning weight painting for characters represented in various formats. We utilize signed distance fields (SDF) to handle different representations and employ graph neural networks and multi-layer perceptrons to predict the skinning weights for a given point.

• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.378-383
• /
• 2018

This study was carried out to investigate the optimum cultivation distance for high yielding cultivation of the new variety of Gomchwi in highland and lowland. The test material was used 'Sammany' variety and the area was cultivated with a highland of 750 m above sea level and a lowland of 20 m above sea level. The planting distance was 5 treatments of $20{\times}20cm$, $20{\times}30cm$, $30{\times}30cm$, $35{\times}40cm$ and $40{\times}40cm$, and the plant was cultivated at 35% shading net in the open field. The annual growth of 'Sammany' variety was higher in the highland than in the lowland, but the number of leaves was higher in the lowland than that in the highland. The leaf number per plant was the highest in the $40{\times}40cm$ plot and the more the planting distance was, the more tendency was. However, the leaf weight per plant was higher in the highland than in the lowland. The number of leaves per 10a were higher in the lowland than that of highland and the tendency was more as the planting distance was narrower. Yields were slightly higher in the highland than that of lowland and the highest treatment plot was 2,983 kg/10a in $20{\times}20cm$. In the second year, the growth was high in the highland, and the highland was high in the leaf number and leaf weight and the same tendency in the yields. Among the planting distances, Yields in both areas were the highest in the $20{\times}20cm$ treatment, with 3,369 kg/10a in lowland and 7,257 kg/10a in highland. The growth of the third year was slightly better in the highland than that of the lowland but the difference was not significant. However, the number of leaves and leaf weight per plant were higher in the lowland than that of highland. And, in terms of leaf number and yield per 10a, it was also higher in the lowland than that in the highland. The narrower the planting distance was increased yields, and the highest yield was 6,051 kg/10a in $20{\times}20cm$. The lowland was high in yield until the third year, but the highland was the highest in the second year and decreased slightly in the third year. The narrower the planting distance in the both areas, the higher the yield, and the leaf size tended to be small.

• Journal of the Korean Society of Tobacco Science
• /
• v.3 no.1
• /
• pp.58-65
• /
• 1981

This study was carried out to investigate the influence of distance of planting holes (51, 45, and 40 cm) and number of plants per a hole(4, 5, 6 plants) on agronomic characteristics, yield, and quality of an aromatic tobacco, Sohyang. The results are as follows: 1. Relative light intensity increased by widening the distance of holes. 2. Leaf area per a plant or per a leaf, and leaf length and width increased by widening the distance of holes and decreased by increasing the number of plants per a hole. But L. A. 1. increased by increasing the number of plants per a hole. Leaf shape index (Leaf length/Leaf width) showed little differences among treatments. 3. Dry weight of leaf, root, and stem per a plant decreased by increasing the number of plants per a hole. 4. Total nitrogen decreased by increasing number of plants per a hole and in the case of narrow distance of holes, but nicotine, reducing sugar, ether-extract and ash showed little differences. 5. Yield per 10a decreased by widening the distance of holes. 6. Quality(price per kg) was improved by increasing the number of plants per a hole at the Plot of 51m distance of holes. But there was no variation at the Plot of 45cm. And quality was decreased at the plot of 40cm distance of holes by increasing the number of Plants per a hole. 7. Price per 10a was highest in the plot of which plant spacing was $90\times$40cm and the number of plants per a hole was 4 (11112 plant/10a).