• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.121-128
• /
• 2019

Various artificial reefs provide the fish habitat and nursery, and contribute the improvement of fisheries productivity. The evaluation methods of fishery resources in the artificial reefs have been done by fishing, scuba diving, underwater camera, and scientific echo sounder/sonar. There are a number of studies using echosounders on the quantitative and qualitative evaluations of artificial reefs in various seas around the world. This study focused on the spatial distribution of fishes around artificial reefs and the influential area of reefs off Bukchon, Jeju Island. Not only acoustic data but also various properties of artificial reefs were used in the geographic information system to extract relevant results. As a result, the major material of reefs on this study site was concrete and the number of reefs with that material was the most. The volume of reefs consisted of steel only and steel with riprap was considerably large compared to other reefs. The average NASC in the vertical distribution of fishes in artificial reefs was $31.6m^2/nm^2$ in April, and that was $61.3m^2/nm^2$ in June. The distance between the fish school and their nearest reef in June morning had a wide range from 750 to 3250 m. On the basis of the influence ray of artificial reefs, it had a tendancy of NASC to decrease with distance from the reef in the June morning. It is a preliminary study to present the geospatial analysis example to understand a better way of comprehensive artificial reef environments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.297-306
• /
• 2019

Since the centrifugal force acts on the flow in the curved channel, a transverse water surface gradient occurs and the thalweg is biased toward the outer bank. The submerged vanes may be used to solve various engineering problems of the curved channels. In order to analyze the influence of an attack angle and the distance between the vane arrays on the river bed variation and the superelevation in a bend, movable bed hydraulic experiments were conducted in a $90^{\circ}$ curved rectangular channel of a small-size gravel bed. Installing the submerged vanes in the bend increases the maximum scour depth. But if vanes are installed in a uniform obtuse angle, the scour depth may be reduced. If the flow rate in the channel bend with vanes equals to the channel forming discharge, the location of the maximum scour depth moved to the downstream and the superelevation increased. However if the flow rate is smaller than that, the location of the maximum scour depth moved upstream and the superelevation decreased. The channel bed change and the superelevation due to the installation of the submerged vanes have been dependent on the interaction of the attack angle, the flow rate, and the distance between the arrays.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.39-55
• /
• 2022

This study carried out the laboratory tests for AE signal attenuation to determine the attenuation coefficient (α) of silo concrete in Gyeongju low and intermediate-level disposal environments. The concrete samples were prepared by satisfying the concrete mixing ratio used in the Gyeongju disposal silo, and these samples were additionally exposed depending on the temperature conditions and saturation and, dry condition. As a result of attenuation tests according to the transmission distance on three concrete specimens for each disposal condition, the AE amplitude and absolute energy measured on the saturated concrete were higher than that of the dry concrete in the initial range of the signal transmission distance, but the α of the saturated concrete was higher than that of the dry concrete. Regardless of the saturation and dry conditions, the α tended to decrease as the temperature increases. The α had a more major influence on the saturation and dry condition than the temperature condition, which means that the saturation and dry condition is the main consideration in measuring the signal attenuation of a concrete disposal structure. The α of concrete in the disposal environment expect to be used to predict the integrity of silos concrete in Gyeongju low and intermediate-level disposal environments by estimating the actual AE parameter values at the location of cracks and to determine the optimum location of sensors.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.54-63
• /
• 2022

Recently, electric propulsion aircraft with various propeller mounting positions have been under construction. The position of the propeller relative to the wing can significantly affect the aerodynamic performance of the aircraft. Placing the propeller in front of the wing produces a complex swirl flow behind or around the propeller. The up/downwash induced by the swirl flow can alter the wing's local effective angle of attack, causing a change in the aerodynamic load distribution across the wing's spanwise direction. This study investigated the influence of the distance between a propeller and a wing on the aerodynamic loads on the wing. The swirl flow generated by the propeller was modelled using an actuator disk theory, and the wing's aerodynamics were analysed with the VSPAERO tool. Results of the study were compared to wind tunnel test data and established that both axial and spanwise distance between the propeller and the wing positively affect the wing's lift-to-drag ratio. Specifically, it was observed that the lift-to-drag ratio increases when the propeller is positioned higher than the wing.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.101-120
• /
• 2023

Electrical resistivity survey have been widely conducted at diverse scales, from a few centimeters for laboratory tests to kilometers for field tests. It measures electrical resistance through relationship of electric potential difference and current between two electrodes penetrated on the surface of medium, and eventually quantifies electrical resistivity known as inherent properties of the medium. In field or full-scale test, it assumes the electrodes as equivalent half-sphere electrodes that have a same surface area with different electrodes for ease of calculation because the contact area between electrode and medium is small and sufficient distance between two electrodes. However, small-scale laboratory test is significantly affected by the electrode geometries (penetrated depth, height, radius of electrode and distance between electrodes), which change the equipotential surface and electric current flow. Indeed, the electrode geometries may eventually cause a difference of electrical resistivity value. This study reviews the theoretical electrical resistance derived with various electrode geometries (half-sphere, cylinder, cylindrical with half-spherical tip, cylindrical with conical tip) and verifies the developed numerical module by comparing results with the theoretical electrical resistance. The distributions of electrical resistance around electrodes and among electrodes are analyzed. In addition, it is discussed how the electrical characteristic of cylindrical electrode with conical tip widely used in field test has effect on the electric current flow.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.2
• /
• pp.123-136
• /
• 2023

Upon examining land prices in the eastern district of Gyeongseong, it was observed that there were variations in land prices between the northern and southern areas, with the central part being densely populated with modern facilities such as hospitals, schools, and research institutions. As a result, the eastern district of Gyeongseong was further divided into specific sub-areas, namely the northeastern and southeastern, for a more detailed analysis of the land market in each area. In the northeastern area, factors such as distance from the central area and proximity to planned roads were found to have an impact on land prices. On the other hand, in the southeastern area, the distance between the main road, whice were IHyun Road and Jongro, was identified as a significant influencer of land prices. Therefore, the northeastern area exhibited characteristics of a hinterland, influenced by the concentration of major facilities in the central area, while the southeastern area had a strong commercial orientation, largely shaped by the influence of Jongro as a bustling commercial district. This study is significant in that it sheds light on certain aspects of the modern land market by demonstrating that factors such as accessibility to roads and anchor facilities, as well as the segmentation of the land market, were also influential in the land market a century ago.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.121-133
• /
• 2023

The demand for cement and limestone crushed materials has increased many folds due to the tremendous increase in construction activities in Pakistan during the past few decades. The number of cement production industries has increased correspondingly, and so the rock-blasting operations at the limestone quarry sites. However, the safety procedures warranted at these sites for the blast-induced ground vibrations (BIGV) have not been adequately developed and/or implemented. Proper prediction and monitoring of BIGV are necessary to ensure the safety of structures in the vicinity of these quarry sites. In this paper, an attempt has been made to predict BIGV using artificial neural network (ANN) at three selected limestone quarries of Pakistan. The ANN has been developed in Python using Keras with sequential model and dense layers. The hyper parameters and neurons in each of the activation layers has been optimized using randomized and grid search method. The input parameters for the model include distance, a maximum charge per delay (MCPD), depth of hole, burden, spacing, and number of blast holes, whereas, peak particle velocity (PPV) is taken as the only output parameter. A total of 110 blast vibrations datasets were recorded from three different limestone quarries. The dataset has been divided into 85% for neural network training, and 15% for testing of the network. A five-layer ANN is trained with Rectified Linear Unit (ReLU) activation function, Adam optimization algorithm with a learning rate of 0.001, and batch size of 32 with the topology of 6-32-32-256-1. The blast datasets were utilized to compare the performance of ANN, multivariate regression analysis (MVRA), and empirical predictors. The performance was evaluated using the coefficient of determination (R²), mean absolute error (MAE), mean squared error (MSE), mean absolute percentage error (MAPE), and root mean squared error (RMSE)for predicted and measured PPV. To determine the relative influence of each parameter on the PPV, sensitivity analyses were performed for all input parameters. The analyses reveal that ANN performs superior than MVRA and other empirical predictors, andthat83% PPV is affected by distance and MCPD while hole depth, number of blast holes, burden and spacing contribute for the remaining 17%. This research provides valuable insights into improving safety measures and ensuring the structural integrity of buildings near limestone quarry sites.

• Journal of dental hygiene science
• /
• v.10 no.1
• /
• pp.45-54
• /
• 2010

The purpose of this study was to offer the importance on factors of selecting dental institution according to general characteristics targeting general dental patients, and the information of having important influence upon choosing dental clinic and dental hospital. The survey was carried out from August 2009 to September. As a result of analyzing SAS(ver 9.1), the following conclusions were obtained. In the importance on factors of selecting dental institution according to general characteristics, it was thought to be important in convenience of movement or mobility such as distance, transportation, and parking convenience according to age level. According to final academic background, the importance in a factor of rumor in dental clinic was high(p < 0.05). According to job, the significant difference was shown in rumor of dentistry and parking convenience(p < 0.05). According to income, the factor in the appearance of training a medical specialist was indicated to be statistically higher in the group with over 5 million won than the group with under 2 million won(p < 0.05). Given seeing the distribution of opinion about dental hospitals (comparison with dental clinics), the excellence in the medical staff's ability was indicated to be the highest in all of the factor of influencing the use satisfaction(${\beta}=0.18$), the factor of influencing the recommendation level(${\beta}=0.21$), and the factor of influencing the re-use intention(OR=2.09).

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.135-141
• /
• 2013

One factor for successful prognosis of finished dental prosthesis is good marginal fit. The purpose of this study in vitro investigation was to compare the marginal fit of all-ceramic crown before and after porcelain veneering, to evaluate the influence of high temperature of the porcelain firing on the fit. For this experiment, model of abutment tooth of maxillary right central incisor was prepared. Ten working models were produced. Ten zirconia cores were made by dental computer aided design/computer aided manufacturing system. The marginal fit of specimens were examined using silicone replica technique. Silicone replicas were sectioned four times and were measured through a digital microscope (${\times}160$). Marginal fit is a distance connected between edge end part of specimen and abutment margin. Each specimens was measured twice, the first measurement was done prior to veneering porcelain firing, while the second measurement was done after the porcelain firing to evaluate this process. Statistical analyses were performed with paired t-test. $Mean{\pm}SD$ marginal fit was $60.8{\pm}14.2{\mu}m$ for zirconia core and $86.1{\pm}13.3{\mu}m$ for all-ceramic crown. They were statistically significant differences (p<0.001). But all specimens showed a marginal fit where the gap widths ranged within the clinical recommendation ($120{\mu}m$), all-ceramic crown production using the zirconia core was adequate.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.236-243
• /
• 2010

We examine the change in healthcare utilization pattern of cancer patients since the launch of KTX in 2004. It is found that during the year of 2004 and 2005 the rapid increase in the ratio of cancer patients' healthcare utilizations for the tertiary hospitals in Seoul to the total healthcare utilizations has accompanied the rapid decrease in the corresponding ratio for the tertiary hospitals in the local metropolitan areas under the influence of KTX while the corresponding ratio for the tertiary hospitals in the local cities with little influence of KTX on them has exhibited mild change. Since healthcare consumers' choice of hospitals can be characterized by "foot voting" action in the healthcare service market in Korea, such a phenomenon may have strong implication that the introduction of KTX may have affected substantially the inter-area healthcare utilization pattern by cancer patients by reducing various sorts of long-distance travel costs. Therefore, considering the potential contribution of KTX to the increase of cancer patients' accessibility to hospitals with higher qualities, support policies such as fare discount for low-income cancer patients in local areas may need to be taken into consideration where the well-designed fare discount program for low-income cancer patients may increase utilizations of KTX by lowincome cancer patients without incurring additional costs to running of KTX.