• 제목/요약/키워드: Distance coefficient

검색결과 954건 처리시간 0.045초

On Assessing Inter-observer Agreement Independent of Variables' Measuring Units

  • Um, Yong-Hwan
    • Journal of the Korean Data and Information Science Society
    • /
    • 제17권2호
    • /
    • pp.529-536
    • /
    • 2006
  • Investigators use either Euclidean distance or volume of a simplex defined composed of data points as agreement index to measure chance-corrected agreement among observers for multivariate interval data. The agreement coefficient proposed by Um(2004) is based on a volume of a simplex and does not depend on the variables' measuring units. We consider a comparison of Um(2004)'s agreement coefficient with others based on two unit-free distance measures, Pearson distance and Mahalanobis distance. Comparison among them is made using hypothetical data set.

  • PDF

열전달 계수 최대화를 위한 마이크로 증발기의 최적 설계 (Optimal design of a micro evaporator to maximize heat transfer coefficient)

  • 성태종;오대식;서태원;김종원
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2097-2101
    • /
    • 2007
  • This paper presents an optimal design of a micro evaporator which maximizes the heat transfer coefficient. Number of gaps, spanwise distance and streamwise distance are selected as the geometric design parameters. Mass flow rate of the refrigerant is selected as the non-geometric design parameter. Temperature at the surface of the heater is measured to valuate the heat transfer coefficient. Nine experiments are conducted using $L_9(3^4)$ orthogonal array. Maximum heat transfer coefficient is 640 W/$m^2K$ at the parameters of 2 gaps, 0.2 mm spanwise distance, 1.0 mm streamwise distance and 0.72 g/s mass flow rate. Among the 3 geometric parameters, the spanwise distance is the most sensitive parameter influencing the heat transfer coefficient. We conduct a second stage of experiment to increase the heat transfer coefficient by reselecting the mass flow rate. We concluded that 0.87 g/s is the optimized flow rate for an active micro cooler resulting in a heat transfer coefficient of 651 W/$m^2K$.

  • PDF

Hydrodynamic movement of two rigid bodies in varied distance

  • 정유석;김현규
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제5회(2016년)
    • /
    • pp.643-646
    • /
    • 2016
  • Fishes usually form a group in water to minimize drag coefficient and this fish schooling is one of representative problems in computational fluid dynamics. In this research, we simulated two fishes as a rectangle. We arranged rectangle horizontal and vertical, then we changed distance between two rectangles and simulated pressure of fluid and drag coefficient. We could find the best distance and position of two fishes that makes minimum drag coefficient.

  • PDF

DETERMINATION OF TRANSIENT WEAR DISTANCE IN THE ADHESIVE WEAR OF A6061 ALUMINIUM ALLOY REINFORCED WITH ALUMINA PARTICLES

  • Yang, L.J.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.217-218
    • /
    • 2002
  • An integrated adhesive wear model was proposed to determine the transient wear and steady-state wear of aluminium alloy matrix composites. The transient wear volume was described by an exponential equation, while the steady-state wear was governed by a revised Archard equation, in which both the transient wear volume and transient sliding distance were excluded. A mathematical method was developed to determine both the transient distance and the net steady-state wear coefficient. Experimental wear tests were carried out on three types of commercial A6061 aluminum alloy matrix composites reinforced with 10%, 15% and 20% alumina particles. More accurate wear coefficient values were obtained with the proposed model. The average standard wear coefficient, as determined by the original Archard equation, was found to be about 51% higher.

  • PDF

베어링 입구에서 발생하는 선단압력에 관한 연구 (A Study on the Inlet Pressure Build-Up at Bearing Entrance)

  • 김종수;김경웅
    • 대한기계학회논문집
    • /
    • 제17권8호
    • /
    • pp.1921-1930
    • /
    • 1993
  • In order to evaluate the inlet pressure correctly, the full Navier-Stokes equations are solved numerically for the computational domain which covers the cavity region between pads as well as the bearing film. A nonuiform grid system is adopted to reduce the number of grid points, and the numerical solutions are obtained for a wide range of Reynolds number in laminar regime with various values of the distance between pads. The numerical results show that the inlet pressure is significantly affected by Reynolds number and the distance between pads. An expression for the loss coefficient in terms of Reynolds number and non-dimensional distance between pads is obtained on the basis of the numerical results. It is found that the inlet pressure over the whole range of numerical solutions can be fairly accurately estimated by applying the formula for the loss coefficient to the extended Bernoulli equation.

파랑 차단 성능 향상을 위한 다열 잠제 사이의 최적 간격에 대한 연구 (Optimum Distance between Multiple Submerged Breakwaters for Wave Screening Performance Enhancement)

  • 조원철
    • 한국해양공학회지
    • /
    • 제20권6호
    • /
    • pp.82-87
    • /
    • 2006
  • Numerical analysis is performed on the wave transmission coefficient of various crown widths of the double-submerged breakwater and the triple-submerged breakwater, varying the distance between submerged breakwaters. The finite element method is used, and the fluid motion is considered as linearized two-dimensional potential flow. In case of the double- and triple-submerged breakwaters, as the width of submerged breakwater increases, the minimum wave transmission coefficient decreases and the wave period at which the minimum wave transmission coefficient occurs moves to a longer wave period the distance between submerged breakwaters at which the minimum wave transmission coefficient occurs becomes larger.

Cluster Analyses에서 Average Taxonomic Distance와 Correlation Coefficient 행렬식들을 이용한 결과의 비교 (Comparison of Reseults using Average Taxonomic Distance and Correlation Coefficient Matrices for Cluster Analyses)

  • Koh, Hung-Sun
    • 한국동물학회지
    • /
    • 제24권2호
    • /
    • pp.91-98
    • /
    • 1981
  • Deer mice, Peromyscus maniculatus, 의 성체 571마리의 30개 morphometric 형질들을 이용한 cluster analyses에서 두가지의 similarity 행렬식 (Average taxonomic distance와 Correlation coefficient 행렬식)을 이용한 dendrogram이 서로 다르다는 것이 확인되었다. 이들 두가지의 행렬식 중에서 taxarks의 형태적인 유연관계를 나타내는 하나의 dendrogram만을 선택하기 위한 한 객관적방법이 제안되었다. 즉 principal component analysis에 의한 결과를 비교할 표준결과로 이용하는 방법이다.

  • PDF

Inference of kinship coefficients from Korean SNP genotyping data

  • Park, Seong-Jin;Yang, Jin Ok;Kim, Sang Cheol;Kwon, Jekeun;Lee, Sanghyuk;Lee, Byungwook
    • BMB Reports
    • /
    • 제46권6호
    • /
    • pp.305-309
    • /
    • 2013
  • The determination of relatedness between individuals in a family is crucial in analysis of common complex diseases. We present a method to infer close inter-familial relationships based on SNP genotyping data and provide the relationship coefficient of kinship in Korean families. We obtained blood samples from 43 Korean individuals in two families. SNP data was obtained using the Affymetrix Genome-wide Human SNP array 6.0 and the Illumina Human 1M-Duo chip. To measure the kinship coefficient with the SNP genotyping data, we considered all possible pairs of individuals in each family. The genetic distance between two individuals in a pair was determined using the allele sharing distance method. The results show that genetic distance is proportional to the kinship coefficient and that a close degree of kinship can be confirmed with SNP genotyping data. This study represents the first attempt to identify the genetic distance between very closely related individuals.

상관계수과 거리계수의 조합형 척도를 이용한 영상인식 (Image Recognition by Using Hybrid Coefficient Measure of Correlation and Distance)

  • 홍성준;조용현
    • 한국지능시스템학회논문지
    • /
    • 제20권3호
    • /
    • pp.343-347
    • /
    • 2010
  • 본 논문에서는 상관계수와 거리계수의 조합형 유사성 척도에 기반을 둔 효과적인 영상인식 방법을 제안하였다. 여기서 상관계수는 Pearson coefficient에 의한 통계적 유사성을 측정하기 위함이고, 거리계수는 city-block에 의한 공간적인 유사성을 측정하기 위함이다. 또한 영상사이의 전체 유사성은 각 영상이 가지는 특징사이의 유사성으로 계산되며, 영상의 특징은 PCA와 ICA로 각각 추출하였다. 제안된 방법을 40*50 픽셀의 960(30명*4표정*2조명*4포즈)개 다른 표정영상을 대상으로 실험한 결과, ICA 기반 조합형 척도를 이용하는 것이 PCA 기반 조합형 척도보다 우수한 인식률을 가지며, 또한 조명과 같은 주변 환경에도 강건한 인식성능이 있음을 확인하였다.

오리피스 전단에 인접한 $90^{\circ}$엘보와 오리피스간의 거리가 유출계수에 미치는 영향 (The Effect of Distance between $90^{\circ}$Elbow close to Upstream Face of Orifice Plate and Orifice Plate on Discharge Coefficient)

  • 윤준용;성낙원
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.357-360
    • /
    • 2002
  • The effect of distance between ninety degree elbow close to upstream face of orifice plate and orifice plate on discharge coefficient was investigated. The distributions of discharge coefficient and differential pressure caused by elbow and short upstream straight length were examined and modified discharge coefficient was introduced. The results presented in this study could be useful when orifice plate is installed under the condition of simple flow disturbance element and short upstream straight length.

  • PDF