• Animal Systematics, Evolution and Diversity
• /
• v.35 no.3
• /
• pp.114-122
• /
• 2019

A new species belonging to the genus Cyclopinopsis Smirnov, 1935 (Cyclopinidae) is described from Korea, as the third species of the genus. Specimens were collected by washing the subtidal sediments off Dokdo Island in the East Sea and the intertidal sands at Baegripo beach, Taean Peninsula on the Yellow Sea coast. Cyclopinopsis deformata n. sp. is characteristic and distinguished from its two congeneric species currently recognized, C. curticauda Smirnov, 1935 and C. brasiliensis Herbst, 1955 in having a deformed seta at the outer distal corner of the third exopodal segment of leg 4. The seta is supposed to be deformed from an outer spine on the third exopodal segment of leg 4, which has been known as completely lost in the genus until now. A character comparison table of the three species and a key to species of the genus Cyclopinopsis are provided herein.

• Journal of Species Research
• /
• v.12 no.3
• /
• pp.244-257
• /
• 2023

The family Ameiridae Boeck, 1865 (Copepoda; Harpacticoida) consists of about 380 species in 47 genera, but only 10 species have been reported in Korea. A benthic ameirid species was collected from the East Sea of Korea. Specimens were identified as members of the genus Ameiropsis Sars G.O., 1907, and this is the first record of the genus Ameiropsis in the Pacific Ocean. Ameiropsis gyeongjuensis sp. nov. is morphologically similar to A. mixta Sars G.O., 1907 and A. longicornis Sars G.O., 1907 from Norway. However, the new species is clearly distinguishable from the others based on the following morphological characteristics: the proximal segment of antennary exopod with a bulge in the middle, and with one pinnate seta; the distal segment of antennary exopod with a thickened, blade-shaped outer seta; and female P5 baseoendopod with five setae and exopod with six setae. An identification key to species is provided for the 11 valid species of the genus Ameiropsis.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.131-142
• /
• 2005

This study was investigated the stability of the AK amputee gait through analysing the variability on kinematic variables between the sound leg and the prosthetic limb. The one male, AK amputee who could walk for himself with his prosthetic limb was participated in this study. Six cameras of the MCU 240 and the QTM(Qualisys Track Manager) software were used for data collecting in this study. The relative angle of both segments was the difference between the absolute angle of the distal segment and the absolute angle of the proximal segment. The coupling angles between the prosthetic limb and the sound leg were caculated on the thigh Flexion/Extension in relative to the shank Flexion/Extension and the shank Flexion/Extension n relative to the foot Flexion/Extension. In order to evaluate the variability of segment and joint angle, C.V. was used, and to evaluate the variability for coupling angles, the Relative motion calculated by vector coding method of the continuous methods was used. As stated, the gait pattern of the prosthetic limb was almost similar gait pattern of the sound leg, but the prosthetic limb showed that the gait pattern of the sound leg and the prosthetic limb were not stable against the sound leg.

• Animal cells and systems
• /
• v.14 no.1
• /
• pp.53-58
• /
• 2010

From an examination of caprellid specimens collected from Korea, we found a new species belonging to the genus Perotripus. This new species is clearly distinguished from two previously recorded species, P. brevis and P. keablei, in having an acute projection and blunt apex of distal segment of pereopod 5. This genus Perotripus is reported from Korea for the first time. We described it with figures in detail. As a result, Korean caprellid fauna consists of 35 species in seven genera.

• Journal of Chest Surgery
• /
• v.26 no.8
• /
• pp.664-666
• /
• 1993

A technique for insertion of a long silicone T-tube in patient with critical stenosis and high-risk resection and primary anastomosis of long segment of the distal trachea is presented. It was not easy to insert a long T-tube by existing methods because of flexibility of a T-tube and tightness of stenosis. So we used a silastic endotracheal tube and guiding wire as stylet of a T-tube. During insertion, ventilation was normally maintained through the lumen of endotracheal tube. This provided rapid relief from airway obstruction and asphyxation and is a easy, safe and effective method to restore patency of the major airways.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.457-466
• /
• 1999

It has been reported that skeletal relapse and dental change after mandibular setback do occur not only after intermaxillary fixation(IMF) removal but also during IMF The side effects of skeletal relapse during IMF have clinical importance because they can cause many Postoperative orthodontic Problems. Generally, the Prevention of solid union between segments, compensatory tooth movement, anterior openbite, etc. have been cited as the side effects of jaw displacement. The purpose of this study was to evaluate the skeletal relapse and dental change during IMF. The material consisted of 28 patients who were treated by BSSRO(bilateral sagittal split ramus osteotomy), wire osteosynthesis, IMF for correction of mandibular prognathism. Through cephalometric analysis, the amount and direction of surgical movement, skeletal relapse and dental change during IMF were measured. The correlation between surgical movement and skeletal relapse, between skeletal relapse and dental changes were evaluated. The following conclusions were obtained; 1. Distal segment was repositioned backward and upward, proximal segment showed clockwise rotation during surgery. 2. During ]m, anterior portion of distal segment was displaced backward and posterior portion was displaced upward. Proximal segment was displaced upward with forward movement of p-Go(gonion of proximal segment). Backward surgical movement of p-GO was significantly correlated with forward displacement of p-Go. 3. Overjet and overbite were not changed during IMF. The compensatory tooth movements during IMF were characterized by retroclination of upper incisors md retroclination, extrusion of lower incisors. These compensatory tooth movements had statistically significant correlation with upward displacement of d-Go (gonion of distal segment).

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.145-156
• /
• 2007

The purposes of this study were to investigate kinematic parameters of racket head and upper extremities during squash back hand stroke and to provide quantitative data to the players. Five Korean elite male players were used as subjects in this study. To find out the swing motion of the players, the land-markers were attached to the segments of upper limb and 3-D motion analysis was performed. Orientation angles were also computed for angular movement of each segment. The results were as follows. 1) the average time of the back hand swing (downswing + follow-through) was 0.39s (0.24 s + 0.15 s). 2) for each event, the average racket velocity at impact was 11.17m/s and the velocity at the end of swing was 8.03m/s, which was the fastest swing speed after impact. Also, for each phase, 5.10m/s was found in down swing but 7.68m/s was found in follow-through. Racket swing speed was fastest after the impact but the swing speed was reduced in the follow-through phase. 3) in records of average of joints angle, shoulder angle was defined as the relative angle to the body. 1.04rad was found at end of back swing, 1.75rad at impact and it changes to 2.35 rad at the end of swing. Elbow angle was defined as the relative angle of forearm to upper arm. 1.73rad was found at top of backswing, 2.79rad at impact, and the angle was changed to 2.55rad at end of swing. Wrist angle was defined as the relative angle of hand to forearm. 2.48rad was found at top of backswing, 2.86rad at impact, and the angle changes to 1.96rad at end of swing. As a result, if the ball is to fly in the fastest speed, the body has to move in the order of trunk, shoulder, elbow and wrist (from proximal segment to distal segment). Thus, the flexibility of the wrist can be very important factor to increase ball speed as the last action of strong impact. In conclusion, the movement in order of the shoulder, elbow and the wrist decided the racket head speed and the standard deviations were increased as the motion was transferred from proximal to the distal segment due to the personal difference of swing arc. In particular, the use of wrist (snap) may change the output dramatically. Therefore, it was concluded that the flexible wrist movement in squash was very important factor to determine the direction and spin of the ball.

• The korean journal of orthodontics
• /
• v.41 no.6
• /
• pp.384-398
• /
• 2011

Objective: The purpose of this study was to analyze the stress distribution and the displacement pattern of mandibular anterior teeth under various intrusive force vectors according to the position of orthodontic miniscrews and hooks, using three-dimensional finite element analysis. Methods: A three-dimensional finite element model was constructed to simulate mandibular teeth, periodontal ligament, and alveolar bone. The displacement of individual tooth on three-dimensional planes and the von Mises stress distribution were compared when various intrusion force vectors were applied. Results: Intrusive forces applied to 4 mandibular anterior teeth largely resulted in remarkable labial tipping of the segment according to the miniscrew position. All 6 mandibular anterior teeth were labially tipped and the stress concentrated on the labiogingival area by intrusive force from miniscrews placed mesial to the canine. The distointrusive force vector led to pure intrusion and the stress was evenly distributed in the whole periodontal ligament when the hook was placed between the central and lateral incisors and the miniscrew was placed distal to the canine. Conclusions: Within the limits of this study, it can be concluded that predictable pure intrusion of the 6 anterior teeth segment may be accomplished using miniscrews placed distal to the canine and hooks located between the central and lateral incisors.

• Journal of Trauma and Injury
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2008

Iatrogenic ureteral injury is a complication that can occur during a variety of pelvic or abdominal surgeries. The most frequent causes are gynecological ones, followed by colon and vascular surgeries. Management of ureteric injury depends on the time of diagnosis and the severity of organ damage. Injuries diagnosed intraoperatively should be treated immediately. Occasionally, intraoperative ureteral injury is overlooked, and symptoms of the late diagnosis of ureteral injury are usually nonspecific; therefore, the diagnosis is delayed for days or weeks postoperatively. Management of injuries diagnosed postoperatively is more complex. There are differing opinions on whether an initial conservative or immediate operative intervention is the best line of action. Delayed repair is suggested on the grounds that it will reduce inflammation and tissue edema. However, many authors are in favor of early repair, perhaps because tissue planes are easier to find before fibrosis becomes too dense. Ureteral injuries occurring at the level of the pelvic brim should be best managed with an end-to-end anastomosis, preferably around a ureteric stent. More distal injuries also should be ideally managed with an end-to-end anastomosis, after excision of the crushed or compromised segments. However, if the remaining distal segment is short, ureteral reimplantation is the procedure of choice. The Boari flap technique for ureteral reimplantation is invaluable in cases with a short proximal segment. Delayed recognition of iatrogenic ureteral injury may be associated with serious complications, so prompt recognition of ureteral injuries is important. Recognition of the injury before closure is the key to easy, successful, and complications-free repair. Increased awareness of the risk for ureteral damage during certain operative maneuvers is vital to prevent injury, and to decrease the incidence of iatrogenic injury. A sound knowledge of abdominal and pelvic anatomy is the best prevention.

• Journal of Korean Dental Science
• /
• v.14 no.2
• /
• pp.110-117
• /
• 2021

Purpose: The purpose of this article is to study the relationship of unintentionally extended split in the distal segment during the bilateral sagittal split ramus osteotomy (BSSRO) and skeletal relapse. Materials and Methods: Twenty patients with mandibular prognathism were divided into two groups according to whether or not unintentionally extended split had occurred. Cone-beam computed tomography images were taken before surgery (T0), immediately after surgery (T1), and postoperatively at 6 months (T2). The stability was evaluated by measuring the change of Nasion perpendicular-Pogonion (N-Pog) distance. Result: Both groups showed mild advancement of Pog during follow-up. In both groups, the condyle head rotated inward and moved posterioinferiorly after surgery, but tended to return to their original position during follow-up. Conclusion: There was no statistically significant difference between the two groups in mandible position. Moreover, the condylar position was stable. If it is difficult to proceed reduction of the unintentionally extended split, careful inspection should be performed to prevent subsequent complications during follow-up.