• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.409-413
• /
• 1996

Paracalanus parvus and P. indicus collected in Korean coastal waters were redescribed to clarify taxonomical confusion. They showed the significant morphological difference in the $2nd\~4th$ swimming legs. In P. parvus the outer distal edge of 3rd segment of exopod of $2nd\~4th$ swimming legs is not serrated. The 1st basipodite has no spinules on the surface. In P. indicus the outer distal edge of 3rd segment of exopod of End and 3rd swimming legs is serrated, while that of the 4th swimming leg is not. This species has the 1st basipodite with a lot of spinules on the surface.

• Animal Systematics, Evolution and Diversity
• /
• v.38 no.4
• /
• pp.167-198
• /
• 2022

Ten species of copepods, including nine new species, associated with compound ascidians are recorded from Korean waters. Nine new species can be characterized by their major diagnostic features, as follows: Botryllophilus pentamerus n. sp. by having a five-annulated abdomen; B. paucisetatus n. sp. by the presence of four and three setae on the exopods of right and left leg 1, respectively; Haplostoma quadridens n. sp. by the presence of four lobes on the labrum and one seta plus four spines on the exopods of legs 1-4; H. paucidens n. sp. by the presence of only two spines on the distal segment of the antenna; Enterocola horridus n. sp. by having five setae on the antenna, no seta on the caudal ramus, and two setae on leg 5; E. longicaudatus n. sp. by having long caudal rami which are more than three times as long as wide; Thoracodelphys bisetata n. sp. by the presence of only two setae on the basis of the maxillule; T. cerasta n. sp. by the presence of a large, horn-like process on the distal margin of the basis of leg 2; and Unimeria hirsuta n. sp. by having three setae on the terminal segment of the maxilla. Zygomolgus didemni (Gotto, 1956) previously known only from European waters is reported from Korean waters, with a redescription and illustrations.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.1
• /
• pp.51-62
• /
• 1994

The sagittal split osteotomy of the mandibular ramus is a common procedure which has been used in the correction of mandibular deformities for a few decades. Although the technical improvements have increased the reliability and stability of SSRO procedure, the postoperative relapse is imperative and clinically more significant than any other complication. One of the major causes of the relapse is due to the displacement of the proximal segment during SSRO procedure, which is well documented in the literature. Therefore it is important to preserve the original position of the proximal segment during SSRO proced and maxillofacial fixation period. In the case of mandibular asymmetry, if one side of mandible is advanced and the other side of mandible is setback during SSRO procedure, the proximal segment in the advancement site will rotate laterally and the proximal segment in the setback site will rotate medially. For the prevention of the lateral rotation or flaring of the proximal segment in the advancment site. we deliberately fracture the posterior protion of the distal segment in green-stick fashion during SSRO procedure, and there is no need to fix the fractured lingual segment. We fix the two osteotomized bony segments in the buccal cortex area rigidly with adjustable monocortical plates and screws. During SSRO procedure the lingual fracture technique was applied to nine patients with severe mandibular asymmetry who underwent orthognathic surgery in our hospital since march, 1992. These clinical experiencies enable us to find the lingual fracture technique has the following advantages. 1. The proximal segment is displaced minimally. 2. The osteotomized bony segments are contacted intimately. 3. The postoperative relapse and the healing period are decreased.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.1
• /
• pp.55-61
• /
• 2011

Conventional slinding genioplsty has the risk of mental nerve injury after operation and difficult to correct vertical asymmetry of chin. So, authors propose a new genioplasty to correct asymmetry of chin. Switching genioplasty is a modification method of conventional genioplasty. Between mandibular right and left canine, osteotomy line of triangular shape make until mandibular lower border. In large side, osteotome line of wedge shape is added to reduction. After osteotomy, segment of wedge shape was separated from chin. Distal segment was rotated to reduction side. Because of rotation of distal segment, space is made in opposite side. Seperated segement of wedge shape from large side is switched this space to fill. So, stability of distal segment is achieved. Authors applied to swiching genioplasty the patients who was remained the chin asymmetry after both sagittal split ramus osteotome was done because mandible asymmetry. After operation, patient and operator were satisfied with excellent esthetic results without any other complication. The switching genioplasty is effective surgical technique for chin asymmetry because it has more advantages than conventional sliding genioplasty. First, other donor side does not need for bone graft. Second, the switching genioplasty can reduce infection, bone resroption, dehiscence, capsular contraction after allograft. Third, have little mental nerve damage. Forth, anteroposterior correction is possible. Fifth, operation time is less than other genioplasty for chin asymmetry.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.173-191
• /
• 2002

The purpose of this study was defined efficient throw motion pattern to obtain the quantitative data and to achieve successful bowling through kinetic - kinematic variables on the throw motion. Subject of group composed of three groups : Higher bowlers who are two representative bowlers with 200 average points and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 frame per secondary. One-way ANOVA has been used to define variable relations. Analyzed result and conclusion are the following : The displacement of back of the hand must have wider difference of each right-left displacement to increase the spin of the ball. In high bowlers group, difference between the front-rear position of back of the hand in case of success and that in case of failure in follow throw is 0.17m. That is to say, momentum in case of success come to increase greatly, compared with that in case of failure. To increase the spin of the ball, the potential difference should be narrower in follow through. In case of the high bowlers, the velocity of the front-rear direction of the back of the hand has been the fastest both in release and follow through, compared with those in other groups, which has contributed to increasing the spin force of the ball. The orders in the resultant velocity of the back of the hand has shown the this : the finger tip$\rightarrow$the back of the hand$\rightarrow$wrist.These orders made the proximal segment support the distal segment. The distal segment has provided the condition to accelerate the velocity. In case of failure, the suddenly increased velocity has caused the failure in the follow through. Acutely flexing the angle of the back of the hand has contributed to lifting to increase the spin of the ball.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.3
• /
• pp.270-278
• /
• 2000

This study was conducted to compare the vein graft with the nerve graft, and evaluated the availability of the vein graft on the reconstruction of the inferior alveolar nerve defect. The experimental animals were 12 rabbits weighing $1.5{\sim}2.0kg$, divided into 3 groups : sham operation group, vein conduit group and nerve graft group. All nerves were excised and histomorphometric analysis was performed at 2, 4, 6, 12, 16 weeks after operation. The obtained results were as follows. 1. Histologic examination revealed the regenerated nerve fibers within the lumen of the vein graft and nerve graft at 6 weeks after repair. 2. Axon diameter was significantly larger in nerve graft group(p<0.05) than in vein graft group at 6weeks, and larger in nerve graft group than in vein graft group at 16weeks. 3. Axon density was higher in the vein graft group at 16 weeks. 4. The myelin of the regenerated nerve fibers in distal segment of the vein graft group was thick, approaching the proximal segment at 16weeks. This means remyelination in distal segment in the vein graft group. These results suggested that autogenous vein graft may be used as an alternative to autogenous nerve graft.

• Journal of Veterinary Clinics
• /
• v.28 no.3
• /
• pp.328-331
• /
• 2011

Two dogs presented to the Dueckso Animal Hospital with a history of intermittent lameness of the left forelimb. On physical examination, a visible antebrachial deformity that resulted in gross external rotation of approximately $90^{\circ}$ was observed in two dogs. Medial-lateral radiographic views revealed distal ulnar subluxation, cranial bowing of the radius, radial and ulnar shortening, and external rotation of the paw. A distal ulnar ostectomy and distal radial closing wedge osteotomy were performed in two dogs. A proximal ulnar osteotomy was performed, adjacent to the elbow joint in case 1. Then, the osteotomized site was supported with an intramedullary pin. A T-plate and cortical screws were applied to the proximal and distal radial segments after derotating the distal segment internally. Postoperative radiographic view verified the correction of the angular deformity in two dogs. The follow-up was completed by physical examination 6 and 10 months after surgery respectively. There was no evidence of lameness of the left forelimb in two dogs. Gross observation of the limb revealed an apparent appropriate correction of the rotational and angular deformity in two dogs.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.788-794
• /
• 2010

Purpose: The fingertip is the most commonly injured part of the hand and its injury frequently results in avulsion or crushing of a segment of the nail bed and fracture of the distal phalangeal bone. Restoration of a flat and smooth nail bed is essential for regrowth of a normal nail, which is important not only for cosmetic reasons but also for tactile capability of the fingertip. It is also anatomical reduction of the distal phalanx to promote patient's cosmetics and prevent nail bed deformity. Absence or no replacement of the nail plate results in obliterated proximal skin fold. When the avulsed nail plate cannot be returned to its anatomic position or when it is absent, we use a synthetic material for splinting the nail bed and alternative reductional method for distal phalangeal bone fracture, especially, instead of hardwares. Methods: From January of 2006 to June of 2009, a total of ten patients and fourteen fingers with crushing or avulsion injuries of the fingertip underwent using the artificial nails for finger splint. We shaped artificial nails into the appropriate sizes for use as fingernail plates. We placed them under the proximal skin fold and sutured to the fold proximally and to the lateral and medial edges of the nail bed or to the distal fingertip. Our splints were as hard as K-wire and other fixation methods and more similar to anatomic nail plates. Artificial nails were kept in place for at least 3 weeks. Results: No artificial nail related complication was noted in any of the ten cases. No other nail fold or nail bed complications were observed, except for minor distal nail deformity because of trauma. Conclusion: In conclusion, in order to secure the nail bed after injury and reduce the distal phalangeal bone fracture, preparing a nail bed splint from a artificial commercial nail is a cheap and effective method, especially, for crushed or avulsion injuries of the fingertip.

• Korean Journal of Environmental Biology
• /
• v.33 no.2
• /
• pp.132-139
• /
• 2015

The genus Halectinosoma Vervoort, 1962 is first reported from Korean waters by the discovery of H. perforatum $It{\hat{o}}$, 1981. This species, previously recorded only from Japan, is collected from the sandy beach on the south coast of Korea, and is well distinguished from other congeners by the combination of following morphological characteristics: the elongate caudal ramus; the remarkably bilobated exopod of female P5; the small innermost seta on the distal margin of female P5 exopod; the presence of three setae on the distal exopodal segment in P4; and the presence of scale-like spinules on the ventral surfaces of urosomite. We herein provide detailed description and illustrations of this species.

• Ocean and Polar Research
• /
• v.40 no.1
• /
• pp.23-35
• /
• 2018

A small cyclopoid copepod M. subtilis (Giesbrecht, 1893 ["1892"]) belonging to the genus Monothula $B{\ddot{o}}ttger-Schnack$ and Huys, 2001 was collected by using $60{\mu}m$ mesh net and firstly recorded in the epipelagic layer of the equatorial Pacific Ocean. We redescribed its morphological characteristics for both female and male, comparing with those of previous studies. Specimens of M. subtilis from the equatorial Pacific Ocean differ from those previously reported by others in terms of the length of the seta G on antenna, being much shorter than setae E and F; in the distal spine on the swimming leg 4, being longer than the length of the third segment on P4. The outer spine of the P3 enp-3 in male is slightly over the tip of conical process. The spine lengths of the distal endopods of P2-P4 for both sexes showed variations among individuals, and the proportions of spine lengths in female are higher than those in male.