• Journal of Chest Surgery
• /
• v.9 no.2
• /
• pp.245-250
• /
• 1976

A 33 year-old man was admitted with chief complaints of severe sharp pain on left upper interscapular region and motor weakness of left arm for 9 days. He had a history of blunt trauma over left shoulder about 3 years ago. Physical examination showed a ping pong ball sized mass which was located at the left supraclavicular area and was firm, fixed, and nonpulsatile. No bruit or murmur was obtained over the mass. Ipsilaterally, radial, ulnar, and brachial pulse were very weak and ptosis and anhidrosis were noticed. Neurologic examination revealed moderate or severe weakness of flexion and extension of left elbow, wrist and fingers, and anesthesia of the skin in left C8-T1 dermatome and hypalgesia in left C6-C7 dermatome. Retrograde aortography demonstrated complete obstruction of left subclavian artery. An exploratory operation was performed through the left 4th intercostal space. It was found that the mass was a left subclavian aneurysm of traumatic false type. Proximal and distal ligation of the aneurysm were applied and the sac was partially removed. The continuity of the subclavain artery was established by the use of a 6mm. Dacron graft from the root of the subclavian to the axillary artery. Postoperatively the patient was improved from the circulatory and neurologic disturbances.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.187-190
• /
• 2010

Purpose: Pediatric trigger thumb is a condition of flexion deformity of the interphalangeal (IP) joint. The known surgical treatment is the release of the flexor pollicis longus by transection of the A1 pulley. We report two cases of pediatric trigger thumb that were resolved by releasing of additional pulley as well as A1 pulley. Methods: From March 2006 to April 2008, a total of 10 children with trigger thumb were operated. In two cases, transection of only the A1 pulley was insufficient to relieve the triggering. When more distally dissection, we found an additional pulley. After release of the additional pulley, the full extension of IP joint is obtained. Results: There were no significant complications. In 8 cases, the trigger thumbs were resolved by transecting only the A1 pulley, does not extend beyond the base of the proximal phalanx. In one case, the additional pulley was found to be more distal to the A1 pulley. It was necessary to extend the release up to the half in the proximal phalangeal shaft. In other case, the additional pulley was immediately adjacent to the A1 pulley. Conclusion: In most cases of trigger thumb, division of just A1 pulley is sufficient to relieve the triggering. However, dividing the A1 pulley in two patients proved to be insufficient to relieve the flexed deformity. In these cases, we found that the additional pulley, different from previous known A1 pulley, had existed, which must be transected to allow full excursion of flexor pollicis longus.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.148-155
• /
• 2008

The aim of the study is to interpret the distribution of occlusal force by 3-dimensional finite element analysis of ISP(Implant Supported Prosthesis) supported by minimum number of implant to restore the edentulous patients. For this study, the Astra Tech implant system is used. Geometric modeling for 6 and 4 fixture ISP group is performed with respect to the bone, implant and one piece superstructure, respectively. Implants are arbitrarily placed according to the anatomical limit of lower jaw and for the favorable distribution of occlusal force, which is applied at the end of cantilever extension of ISP with 30mm. Element type is tetrahedral for finite element model and the typical mechanical properties, Young's modulus and Poisson's ratio of each material, cortical, cancellous bone and implant material are utilized for the finite element analysis. From this study, we can see the distribution of equivalent stress equal to real situation and speculate the difference in the stress distribution in the whole model and at each implant fixture, From the analysis, the area of maximum stress is distributed on distal contact area between bone and fixture in the crestal bone. The maximum stress is 53MPa at the 0.2mm area from the bone-implant interface in the maximum side for 300N load condition for 4 fixture case, which is slightly less than the stress calculated from allowable strain. This stress has not been deduced to directly cause the loss of crestal bone around implant fixture, but the stress can be much reduced as the old peoples may have lower chewing force. Thus, clinical trial may be performed with this treatment protocol to use 4 fixtured ISP for old patients.

• Journal of Yeungnam Medical Science
• /
• v.28 no.2
• /
• pp.180-186
• /
• 2011

Obstruction of the bile duct owing to the direct extension of a tumor is occasionally found in patients with a hepatic neoplasm, but bile duct tumor thrombus caused by the intrabiliary transplantation of a free-floating tumor is a rare complication of hepatocellular carcinoma A 50-year-old woman was diagnosed with HCC with bile duct tumor thrombi. She received transarterial chemoembolization (TACE) because her liver function was not suitable for surgery at the time of diagnosis. After TACE, infected biloma occurred recurrently. Thus, resection of the HCC, including the bile duct tumor thrombi, was performed. Six months after the surgery, recurred HCC in the distal common bile duct as drop metastasis was noted. The patient was treated with tomotherapy and has been alive for three years as of this writing, without recurrence. The prognosis of HCC with bile duct tumor thrombi is considered dismal, but if appropriate procedures are selected and are actively carried out, long-term survival can occasionally be achieved.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.27-36
• /
• 2009

The purpose of this study was to identify effects of restricted trunk motion on the performances of the maximum vertical jump. Ten healthy males performed normal countermovement jump(NJ) and control type of countermovement jump(CJ), in which subjects were required to restrict trunk motion as much as possible. The results showed 10% decreases of jumping height in CJ compared with NJ, which is primarily due to vertical velocity at take off. NJ with trunk motion produced significantly higher GRF than RJ, especially at the early part of propulsive phase, which resulted from increased moments on hip joint. And these were considered the main factors of performance enhancement in NJ. There were no significant differences in the mechanical outputs on knee and ankle joint between NJ and RJ. With trunk motion restricted, knee joint alternatively played a main role for propulsion, which is contrary on the normal jump that hip joint was highest contributor. And restricted trunk motion resulted in the changes of coordination pattern, knee-hip extension timing compared with normal proximal-distal sequence. In conclusion these results suggest that trunk motion is effective strategy for increasing performance of vertical jumping.

• Journal of Korean Dental Science
• /
• v.10 no.2
• /
• pp.87-95
• /
• 2017

This case study was to report the possible increase in the denture retention and psychological relief using the implant-supported fixed prostheses in a completely edentulous patient. The implants were placed in the anterior portion of the mandible in a patient who had completely edentulous state following the extraction of residual abutment teeth, and consequently a distal extension removable partial denture was fabricated. The patient's adaptation and satisfaction to the new prosthesis was monitored and confirmed in terms of masticatory function and esthetics, by restoring the oral condition similar to initial status before the residual teeth extraction. After 6 months, radiographic examination confirmed that both the abutment teeth and the implants were stable and well maintained. Considering the relatively short clinical follow-up period, however, continuous long-term monitoring was required.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.442-452
• /
• 2022

Implant-assisted removable partial denture (IAPRD) can be considered as a simple and cost-effective treatment approach for an edentulous patient with anatomical or financial limitations. Recently, it was reported that the application of IARPD with implant supported fixed prostheses covered by the National Health Insurance Service (NHIS) were increasing. This case report describes the treatment of maxillary fully edentulous patient with anterior four-implant-supported fixed prosthesis and distal extension IARPD. This treatment approach may be advantageous over maxillary implant overdentures in some circumstances. The patient was satisfied with improved function and esthetics in the anterior area and financial benefit from the NHIS. Further long-term clinical studies are needed to establish clinical validity of the treatment approach described in this case report.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.2
• /
• pp.79-88
• /
• 2021

Purpose. To assess peri-implant stress distribution using finite element analysis in implant supported fixed partial denture with occlusal schemes of cuspally loaded occlusion and implant protected occlusion. Materials and methods. A 3-D finite element model of mandible with D2 bone with partially edentulism with unilateral distal extension was made. Two Ti alloy identical implants with 4.2 mm diameter and 10 mm length were placed in the mandibular second premolar and the mandibular second molar region and prosthesis was given with the mandibular first molar pontic. Vertical load of 100 N and and oblique load of 70 N was applied on occlusal surface of prosthesis. Group 1 was cuspally loaded occlusion with total 8 contact points and Group 2 was implant protected occlusion with 3 contact points. Results. In Group 1 for vertical load, maximum stress was generated over implant having 14.3552 Mpa. While for oblique load, overall stress generated was 28.0732 Mpa. In Group 2 for vertical load, maximum stress was generated over crown and overall stress was 16.7682 Mpa. But for oblique load, crown stress and overall stress was maximum 22.7561 Mpa. When Group 1 is compared to Group 2, harmful oblique load caused maximum overall stress 28.0732 Mpa in Group 1. Conclusion. In Group 1, vertical load generated high implant stress, and oblique load generated high overall stresses, cortical stresses and crown stresses compared to vertical load. In Group 2, oblique load generated more overall stresses, cortical stresses, and crown stresses compared to vertical load. Implant protected occlusion generated lesser harmful oblique implant, crown, bone and overall stresses compared to cuspally loaded occlusion.

• Physical Therapy Korea
• /
• v.29 no.3
• /
• pp.215-224
• /
• 2022

Background: The presence of the lumbopelvic-hip neuromuscular chain is essential for dynamic spinal stabilization; its therapeutic effects on dynamic movements of the distal extremity segment and underpinning motor mechanism remain unknown and warrant further study on participants with low back pain (LBP). Objects: We aim to compare the effects of the broken chain exercise (BCE) and connected chain exercise (CCE) on electromyography (EMG) amplitude and onset time in participants with and without LBP. Methods: Randomized controlled clinical trial. A convenience sample of 40 nonathletic participants (mean age: 24.78 ± 1.70) with and without LBP participated in this study. All participants underwent CCE for 30 minutes, 30-minute daily. We measured EMG amplitude and onset times on bilateral erector spinae (ES), gluteus maximus (GM), hamstring (HAM), transverse abdominis (TrA), internal oblique (IO), and external oblique (EO) during the prone hip extension (PHE) test before and after the BCE and CCE. We used multivariate analysis of variance (MANOVA) to analyze the amplitude and onset time difference between exercises (BCE and CCE) and Pearson's correlations to determine any synergistic relationship among the HAM, GM, bilateral TrA/IO, and ES muscles. The statistical analyses were used at p < 0.05. Results: MANOVA showed that CCE was more decreased on EMG amplitude in HAM and bilateral ES, while increased GM and contralateral TrA/IO than BCE (p < 0.05). MANOVA EMG onset time data analyses revealed that the main effect of the conditions was significant for all HAM, GM, and bilateral ES muscles, whereas the main effect for the group was significant only for GM and contralateral ES in healthy and LBP groups. Pearson's correlation coefficient was computed to assess the relationship between BCE and CCE on dependent variables. In most of the muscles, there was a strong, positive correlation between the two variables, and there was a significant relationship (p < 0.001). Conclusion: CCE produced more effective and coordinated core stabilization and motor control mechanism in the lumbopelvic-hip muscles in participants with and without LBP during PHE than BCE.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.1
• /
• pp.1-11
• /
• 2024

PURPOSE. The present experiment aimed to evaluate the placement accuracy of fully guided implant surgery using a mucosa-supported surgical guide when the protocol of osteotomy and installation was modified (MP) compared to when the protocol was sequentially and conventionally carried out (CP). MATERIALS AND METHODS. For 24 mandibular dentiform models, 12 dentists (6 experts and 6 beginners) performed fully guided implant placements two times at the right first and second molar sites using a mucosa-supported surgical guide, once by the CP (CP group) and at the other time by the MP (MP group). The presurgical and postsurgical stereolithographic images were superimposed, and the deviations between the virtually planned and actually placed implant positions and the procedure time were compared statistically (P < .05). RESULTS. The accuracies were similar in the CP and MP groups. In the CP group, the mean platform and apex deviations at the second molar site for the beginners were +0.75 mm and +1.14 mm, respectively, which were significantly larger than those for the experts (P < .05). In the MP group, only the mean vertical deviation at the second molar site for the beginners (+0.53 mm) was significantly larger than that for the experts (P < .05). The procedure time was significantly longer for the MP group (+94.0 sec) than for the CP group (P < .05). CONCLUSION. In fully guided implant surgery using a mucosa-supported guide, the MP may improve the placement accuracy when compared to the CP, especially at sites farther from the most-posterior natural tooth.