• Journal of Chest Surgery
• /
• v.16 no.2
• /
• pp.170-174
• /
• 1983

Aortic arch syndrome is an unusual disease entity characterized by the narrowing or obliteration of major branches of the arch of the aorta regardless of etiology. We have experienced 2 cases. One of them was 22 years old office girl with 3 months history of headache, intermittent syncope and weakness and claudication on left arm especially during her physical exercise. On physical examination, pulseless on left antecubital and radial artery and blood pressure on left arm was inable to check and coldness with weakness were noted on the same side. Aortic angiography reealed 34% narrowing of left subclavian artery as that of right. But both common carotid artery and both axillary arterial patency were relatively good. Through right supraclavicular and left axillary incision, bypass graft with Gore-tex prosthesis (I.D. 6mm, Length 25 cm) was implanted from right subclavian artery on 2cm distal to origin of right common carotid arery to left axillary artery distal to axillary fossa. End to side anastomosis with preservation of left subclavian artery was done. Postoperative state was stable with blood pressure of 110/70 mmHg on left arm and palpable antecubital and radial pulsation. Another one was 41 year old male patient with 8 months history of pain and numbness on right upper arm and shoulder. On admission, right arm blood pressure was 110/80 mmHg, left arm was 160/110 mmHg, but other physical findings had no abnormalities. Angiography revealed segmental narrowing of right axillary artery on the beginning with 2 cm in length. Operative treatment with right wupraclavicular and right axillary incision, bypass graft with great saphenous vein (Length; 15 cm) from right subclavian artery between scalenus anticus and medius to axillary artery at distal end of axillary fossa was done. The authors report two cases of Aortic arch syndrome treated with bypass graft using Autograft or Gore-tex with good result.

• Applied Microscopy
• /
• v.26 no.1
• /
• pp.79-93
• /
• 1996

The differentiation of nail matrix and fine structure of matrix cells were studied with light and electron microscope using specimens from nails of thumb finger in Korean fetuses 14 to 24 weeks old. Fetal nail matrix consisted of two horizontal layers, thicker ventral and thinner dorsal matrices, originating from invagination of epidermis in proximal nail field. Matrix being generally thicker in its distal region than the apex became gradually thickened with increase of the fetal age. Each matrix consisted of single layer of basal cells and multiple layers of squamous cells which are arranged close to and parallel to the central axis of the nail mairix. The process of keratinization of fetal nail matrix was noted to be occured concurrently in the ventral and dorsal matrices along the central axis of matrix toward distal and dorsal direction. Squamous cells became matured with accumulation of tonofilaments, increase of keratohyalin granules, discharge of membrane coating granules, and narrowing of intercellular spaces, thickening of plasma membrane and finally being transformed into horny cells of nail plate. Horny cells of nail plate filled with fibrous elements in the electron dense amorphous substance. These findings of keratinization process of fetal nail matrix appeared to be similar to those of keratinization in epidermis and inner root sheath of the hair. In the nail matrix, however, corresponding region to the keratogenous zone of growing hair follicle was not observed. Vacuolated squamous cells of nail matrix seen on light microscopy was considered to be artefactual product, but squamous cells with condensed small nuclei rarely found adjacent nail plate was considered to be one of the squamous cells with unknown function. Proximal end of nail plate was observed on dorsal surface of nail field distal to the proximal nail fold at 14 and 16 weeks old human embryos. Proximal prolongation of the proximal end of nail plate was occured with advancing fetal age and afterward 21 weeks nail plate invaded into nail matrix. Melanin granule containing cells and Merkel cells were present only on the basal layer of dorsal nail matirx.

• The korean journal of orthodontics
• /
• v.45 no.4
• /
• pp.171-179
• /
• 2015

Objective: To compare dentoalveolar and skeletal changes produced by the pendulum appliance (PA) and the distal screw appliance (DS) in Class II patients. Methods: Forty-three patients (19 men, 24 women) with Class II malocclusion were retrospectively selected for the study. Twenty-four patients (mean age, $12.2{\pm}1.5years$) were treated with the PA, and 19 patients (mean age, $11.3{\pm}1.9years$) were treated with the DS. The mean distalization time was 7 months for the PA group and 9 months for the DS group. Lateral cephalograms were obtained at T1, before treatment, and at T2, the end of distalization. A Mann-Whitney U test was used for statistical comparisons of the two groups between T1 and T2. Results: PA and DS were equally effective in distalizing maxillary molars (4.7 mm and 4.2 mm, respectively) between T1 and T2; however, the maxillary first molars showed less distal tipping in the DS group than in the PA group ($3.2^{\circ}$ vs. $9.0^{\circ}$, respectively). Moreover, significant premolar anchorage loss (2.7 mm) and incisor proclination ($5.0^{\circ}$) were noted in the PA group, whereas premolar distal movement (1.9 mm) and no significant changes at the incisor ($0.1^{\circ}$) were observed in the DS group. No significant sagittal or vertical skeletal changes were detected between the two groups during the distalization phase. Conclusions: PA and DS seem to be equally effective in distalizing maxillary molars; however, greater distal molar tipping and premolar anchorage loss can be expected using PA.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.4
• /
• pp.484-514
• /
• 1994

Cantilever bridge is widely used by mny clinicians, but its worst mechanical character, so called Class I lever system, makes dentists hesitate to restore the missing tooth with it. Therefore it is important to study stress of the cantilever bridge. In this study, two models of cantilever bridges that restores the missing mandibular second molar with two abutment teeth were constructed. One model was a type of cantilever bridge supported by a normal alveolar bone, the other one was supported by an alveolar bone resorbed to its 1/3 of root length. Maximum bite force(550N) and funtional maximum bite force(300N) were vertically applied to the distal end of the pontic, distal 1/3, and distal half of the pontic. And each force was also applied to centric occlusal contacts as a distributed force. Total 16 loading cases were compared and analyzed with 3-dimensional finite element method. The results were as follows: 1. The stress was concentrated on the joint of the pontic and the retainer, grooves, and distal cervical margin of the posterior retainer. 2. In case of maximum bite force(550N) at the end of the pontic, the risk of fracture at the joint of the pontic and the retainer was high. 3. In case of distributed force in centric occlusion and functional maximum bite force(300N), the stresses were less than the yield strength of the type VI gold for any loading cases. 4. In case of alveolar bone resorption, the occlusal force to the cantilever pontic caused more stress on the root apex and less stress on the alveolar crest region of the distal surface of the posterior abutment. 5. In case of alveolar bone resorption, the displacement was larger than that of normal alveolar bone in all loading cases.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.46-52
• /
• 2009

Purpose: To evaluate the usefulness of minimally invasive arthroscopy-assisted plate removal of a laterally inserted periarticular distal femur plate used for the treatment of AO type-C distal femur fractures. Materials and Methods: From October 2002 to November 2005, we evaluated 17 patients whose plates were removed through minimally invasive arthroscopy-assisted plate-removal technique and 15 patients who got their plates removed through conventional method without using arthroscopy, 32 patients in total. All these patients included in this study initially underwent open reduction and internal fixation of the distal femoral fractures with a lateral plate, and complained of continued pain over the lateral femoral condyle after the fracture fixation. The average age was 42.6 (ranges: 20~66) and initial fracture types included 16 cases of C1, 11 cases of C2, and 5 cases of C3 following AO/ASIF classification guidelines. Measured outcomes included: associated intra-articular pathologies, time needed to return to activities of daily living, patients' overall satisfaction, complications following the removal of hardware, and pain before and 6 months after the operation. Results: The distal-most end of the plate was placed in the knee joint in all cases and damage of the lateral articular capsule was found in 23 cases. Continuous wound discharge after surgery was found in one case who underwent arthroscopy-assisted plate removal, and it was treated by irrigation and re-suture. Average time needed to return to activities of daily living was 7 days in arthroscopy assisted group and 7.6 days in conventionally removed group. Fourteen patients (82.4%) who underwent arthroscopyassisted plate-removal reported above 'fair' satisfaction and the Visual analog scale pain score decreased from 4.9 to 1.9, six months after the plate removal. Thirteen patients(86.7%) who underwent conventional plate removal reported above 'fair' satisfaction and the Visual analog scale pain score decreased from 5.2 to 2.5, six months after the operation. Conclusion: Through minimally invasive arthroscopic-assisted plate removal, intrarticular pathology of the knee joint was able to be simultaneously identified and treated at the time of hardware removal. Damage of lateral capsule of the knee joint caused by the inserted plate for the treatment of type C distal femoral fracture was very frequently found and following the plate removal, patients experienced an improvement in pain score. We therefore recommend routine lateral distal femoral plate removal if the bony union is attained in such cases as type C distal femoral fractures whose distal most end of the plates are located in the joint.

• Journal of Animal Science and Technology
• /
• v.64 no.5
• /
• pp.997-1007
• /
• 2022

Delayed healing associated with distal limb wounds is highly challenging in equine clinical practice. This study aimed to evaluate healing rates between chronic non-granulating wounds of horse distal limbs that were treated with maltodextrin/ascorbic acid gel alone or in combination with povidone-iodine 1% solution and those treated with povidone-iodine 1% only throughout the study period (35 days) in clinical settings. The study was conducted on 18 adult horses (3-15 years old). Based on the treatment regimen utilized, the horses were divided into three groups (n = 6), with each group having a similar mean wound area. The percentages of wound contraction, epithelialization, and overall wound healing were determined weekly for each wound. By the end of the study, the total wound healing percentage was significantly increased between the study groups (p < 0.05). The use of maltodextrin/ascorbic acid gel resulted in considerable wound contraction, rapid epithelialization, and complication-free wound healing. Based on the findings of this study, maltodextrin/ascorbic acid gel, independently or in combination with a 1% povidone-iodine solution, might be applied as a safe and effective wound healing promoting agent in horses with chronic non-granulating wounds.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.425-433
• /
• 1999

Dr. Youn-Sic Chun and coworkers invented the new machine for getting information about the relative effectiveness of the orthodontic appliances and we named it Calorific machine. The author and colleagues used this machine to compare with tooth moving mechanism by 3 types of the insertion method of precision-TPA for derotating the posterior teeth. We measured the distance of tooth movement and found out the rotational center on the occlusal X-ray film and the tooth movement on the occlusogram and then processed paired t-test by SAS program, The results were as follows : 1. In the intermolar width, the mesial insertion method showed the loss oi distance, and the other methods(-distal insertion method, mesial expansion method-) showed the increase of distance. 2. In the arch length, the distal insertion method was exhibited as most recommandable way for increasing the arch length .3. The rotation center of the mesial insertion method for derotating the molar, was located between mesial pit and central pit of the lower End molar. And, in the distal insertion method, it was located between distal pit and distolingual cusp, and in the mesial expansion method was located at distal pit.

• Journal of Chest Surgery
• /
• v.26 no.6
• /
• pp.496-500
• /
• 1993

Takaysu`s arteritis is an arteritis of unknown etiology involving larger elastic arteries. The end stage pathologic feature is vascular obstructive change and the resulting clinical manifestations are local ischemic symptoms such as syncope, visual disturbance, claudication of extremities, hypertension, and angina. Recently we have experienced one case of Takayasu`s arteritis involving aortic arch, left common carotid artery and left subclavian artery. The patient was 27 year-old female and she was admitted because of headache and neck pain. Aortogram revealed fusiform dilatation of left common carotid artery with focal narrowing on it`s distal portion. The patient underwent surgical resection and replacement of Dacron tube graft between distal and proximal left common carotid artery. 3 months after operation, she was readmitted because of shoulder pain and headache. Aortogram revealed focal narrowing of proximal left common carotid artery and total obstruction of left subclavian artery which caused subclavian steel syndrome. Aorto-left common carotid and aorto-left subclavian bypass graft replacement were done.

• Applied Microscopy
• /
• v.25 no.2
• /
• pp.1-10
• /
• 1995

This study was carried out to clarify the neuronal organization in pineal body of catfish. The pineal body was observed by acetylcholinesterase histochemistry and electron microscopy. The neuronal types observed in the pineal body of catfish were bipolar and multipolar cells. Multipolar cells were found throughout the pineal end vesicle and whole stalk, but bipolar cells only in the end vesicle and distal stalk. The pineal tract was formed by the long axons of these neurons. The neuronal clusters(pineal ganglia) were also observed in the end vesicle. In summary, the type of neurons in catfish pineal was different from that of other species, and the neuronal distribution differed depending on the region of pineal body. These results reflect the interspecific and regional differences of the pineal organization of fishes.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.05
• /
• pp.115-118
• /
• 1994

Three-dimensional steady and pulsatile flows in an end-to-side anastomosis were investigated using a finite difference method in order to understand the flow dynamics in the preferential development of distal anastomotic intimal hyperplasia or thrombosis. Steady flow results revealed that a double helical vortex was formed in the host artery and flow recirculations near tow and heel regions were limited due to the secondary flow. Oscillating wall shear stress with significant secondary flow might be the flow dynamic reason of developing intimal hyperplasia or thrombosis.