• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.38-48
• /
• 1989

The purpose of this study was to investigate the proper consistency of root canal sealer needed in obtaining an efficient canal obturation in injection-thermoplasticized low-temperature ($70^{\circ}C$) gutta-percha method. The sealer was made by incorporating zinc oxide powder into $0.5m{\ell}$ of eugenol and then the $0.5m{\ell}$ of mixture slurry was placed between two flat glass plates. The consistency was determined by measuring the degree of spread of the slurry at loading the 120gm of weight from the top plate. The sealer was prepared according to P/L ratio corresponding to the acquired consistency of 65.45mm, 46.80mm, 28.95mm and 22.60mm. The distal roots were obtained by cutting off from 125 extracted human lower molars and the root canals were prepared by using step-back method. The prepared canals were coated with the sealers on their walls and obturated by using the injection-thermoplasticized low-temperature ($70^{\circ}C$) gutta-percha method. All specimens were immersed in 2% methylene blue dye solution for 48 hours at $37^{\circ}C$. Calipers was used to measured the dye penetration into the root canals from apical constrictions. The results were as follows : The canals obturated without sealer showed significantly more leakage than the canals obturated with sealer. Within the consistency from 65.45mm to 22.60mm, the sealer of 65.45mm appeared significantly better than that of 28.95mm and 22.60mm in the canals obturated by injection-thermoplasticized gutta-percha method, and better than that of 46.80mm without statistical significance.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.295-300
• /
• 2015

Odontoclasts and osteoclasts resorb tooth root and alveolar bone, respectively. Many studies have focused on osteoclast formation in periodontitis, but effect of periodontitis on odontoclast formation is not clearly clarified. In this study, we observed formation of odontoclasts as well as osteoclasts in rats with ligature-induced periodontitis. To induce periodontitis, ligatures were placed around the first molars in left mandibles of rats. Rats were sacrificed at days 1, 3, and 10 after ligation. After tartrate resistant acid phosphatase (TRAP) staining in mandible section, the number of TRAP-positive odontoclasts and osteoclasts were histologically counted along the root and the alveolar bone surfaces of tooth, respectively. Odontoclasts increased until day 10 in mesial and furcation root surface, but did not increase in distal root surface. When compared odontoclast formation to osteoclast formation in mesial surface, osteoclasts peaked at day 3, and then decreased gradually, whereas odontoclasts were continuously increased until day 10. The number of odontoclasts was lower than that of osteoclasts before and after periodontitis induction. These indicate that periodontitis increased formation of odontoclasts as well as osteoclasts, but odontoclast formation occurs slower and weaker than that of osteoclasts.

• Journal of Acupuncture Research
• /
• v.22 no.1
• /
• pp.203-210
• /
• 2005

Objective : This study is present studies of Definition and Acupuncture Treatment of Biaoben (標本), Geungyul(根結) and kika(氣街). Methods : We studied oriental medical books and joumal related with Biaoben(標本), Geungyul(根結) and kika(氣街). Results & Conclusions : 1. Theory of Biaoben (標本), Geungyul(根結) and kika(氣街) is a ground of remote acupuncture point needling. 2. Ben(本) and Geun(根) at distal part of limbs have effect a disease of haed, face, chest and back.

• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.16-22
• /
• 2001

The purpose of this study was to evaluate the marginal microleakage of condensable composite resin restorations according to flowable resin lining of internal cavity wall. The eighty extracted human molar teeth without caries and/or restorations are used The experimental teeth were randomly assigned into four groups of ten teeth each. Eighty caries-free extracted human molars were used in this study. The conventional class II cavities (box-shaped on mesial and distal surface, faciolingual width : 3mm, gingival wall depth : 1.5mm) were prepared 1mm below cementoenamel junction with a # 701 carbide bur. The teeth were divided into four groups, and then each group were subdivided into A & B group according to flowable resin & compomer lining ; Group 1-A : Tetric Ceram filling, Group 1-B : Tetric Flow lining and Tetric Ceram filling, Group 2-A Ariston pHc filling, Group 2-B : Tetric Flow lining and Ariston pHc filing, Group 3-A SureFil filling, Group 3-B : Dyract Flow lining and SureFil filling, Group 4-A : Pyramid filling, Group 4-B : Aeliteflo lining and Pyramid filling. To simulate as closely as possible the clinical situation during retoration placement, a "restoration template" was fabricated, and the condensable resin was filled using a three-sited light-curing incremental technique. All the materials used were applied according to the manufacturers' instructions. The specimens were stored in the 100% humidity for 7 days prior to thermocycling (100 thermal cycles of 5~55$^{\circ}C$ water with a 30-second dwell time) The specimens were immersed in 2% metyleneblue dye for 24 hours, and then embedded in transparent acrylic resin and sectioned mesiodistally with diamond wheel saw. The degree of marginal leakage was scored under stereomicroscope ($\times$20) and the data were analyzed by Kruskal-Wallis test and Wilcoxon signed ranks test. The results were as follows : 1. In the gingival margins of all the group, microleakage of subgroup B was less than subgroup A. 2. In the group 1, 2, 4, there was significant differences between subgroup A and B (p<0.05), but in the group 3, there was not significant different between group 3-A (SureFil) and group 3-B (Dyract flow/SureFil) (p>0.05). 3. In the subgroup A and B, there was significant different between all group except group 4 of subgroup A. From the results above, it was suggested that the cavity lining of flowable resin and flowable compomer in condensable resin restoration decrease microleakage at gingival margin, and does improve their ability to seal the gingival margin of class II preparation.

• The Korean Journal of Physiology and Pharmacology
• /
• v.24 no.6
• /
• pp.555-561
• /
• 2020

TWIK-related two-pore domain K⁺ channel-2 (TREK-2) has voltage-independent activity and shows additional activation by acidic intracellular pH (pH_i) via neutralizing the E³³² in the cytoplasmic C terminal (Ct). We reported opposite regulations of TREK-2 by phosphatidylinositol 4,5-bisphosphate (PIP₂) via the alkaline K³³⁰ and triple Arg residues (R^355-357); inhibition and activation, respectively. The G³³⁴ between them appeared critical because its mutation (G³³⁴A) endowed hTREK-2 with tonic activity, similar to the mutation of the inhibitory K³³⁰ (K³³⁰A). To further elucidate the role of putative bent conformation at G³³⁴, we compared the dual mutation forms, K³³⁰A/G³³⁴A and G³³⁴A/R^355-7A, showing higher and lower basal activity, respectively. The results suggested that the tonic activity of G³³⁴A owes to a dominant influence from R^355-7. Since there are additional triple Arg residues (R^377-9) distal to R^355-7, we also examined the triple mutant (G³³⁴A/R^355-7A/R^377-9A) that showed tonic inhibition same with G³³⁴A/R^355-7A. Despite the state of tonic inhibition, the activation by acidic pH_i was preserved in both G³³⁴A/R^355-7A and G³³⁴A/R^355-7A/R^377-9A, similar to the R^355-7A. Also, the inhibitory effect of ATP could be commonly demonstrated under the activation by acidic pH_i in R^355-7A, G³³⁴A/R^355-7A, and G³³⁴A/R^355-7A/R^377-9A. These results suggest that the putative bent conformation at G³³⁴ is important to set the tug-of-war between K³³⁰ and R^355-7 in the PIP₂-dependent regulation of TREK-2.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.699-702
• /
• 2011

Purpose: Venous stasis ulcer is the most severe form of chronic venous insufficiency and this commonly appears in the lower limb. Pharmacological therapy, reconstruction of the venous system, surgical management, cellular therapy and compression therapy are known as the treatments of venous stasis ulcer, but relapses are common, which make it a typical chronic wound. We report here on a case of recurrent venous stasis ulcer that healed with compression therapy without any other treatment. Methods: A 35-year-old man with a 13 years history of venous stasis had developed an ulcer on the distal third portion of the lower left limb which was developed 12-year before enrollment in this study. He had been treated with vacuum assist closure, 2 times of cell therapy and 3 times of skin graft for 8 years, but the lesion recurred. From November, 2008 compression therapy was done with the 3M $Coban^{TM}$ 2 Layer Compression System (3M, St. Paul, USA). The ulcer at that time was oval shaped and $3{\times}4$ cm in size. A comfort layer bandage was applied from the proximal phalanx of the great toe to the knee. A compression layer bandage was applied on the previous layer with it being overlapped one half the width of the comfort layer bandage. The dressing was changed every 4 days and the change was recorded with photography. Results: A total of 12 $Coban^{TM}$ 2 Layer Compression Systems were used. The size of the ulcer decreased to $2.5{\times}2.5$ cm in one month, to $2{\times}2$ cm in 2 months, it was $1{\times}1.8$ cm in size at 3 months and it completely healed in 4 months. Conclusion: The venous stasis ulcer was completely healed using the 3M $Coban^{TM}$ 2 Layer Compression System. This method was easy to apply, made the patient comfortable and it provided an excellent compression effect. As in the previous studies, this compression therapy has been proven to play an important role for the treatment and prevention of venous stasis ulcer.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.3
• /
• pp.293-302
• /
• 2012

Background & Purpose : The purpose of this study is to evaluate the impairment of SVMC(selective voluntary motor control) of the lower extremity by assessing each joints of lower limb and to analyze the motional relationship between each joints of lower limb using SCALE(Selective Control Assessment of the Lower Extremity) during the swing phase of gait cycle in children with spastic diplegia. Method : 11 children with spastic diplegia CP who could walk independently and 10 normal developing children were participated. SCALE(Selective Control Assessment of the Lower Extremity) assessments were conducted for 11 children with CP. Gait analysis were accomplished in all participants. Qualisys motion analysis was used as a statistical tool to assess the motional relationship between hip joint, knee joint and ankle joint in each limb. We used descriptive statistics, cross-tabulation, independent t-test, linear regression to analysis motional relationship between each joints of lower limb using by SPSS ver.17.0. Result : Firstly, there were significant differences in SCALE scores between the cerebal palsy group and the control group in knee joint(p<0.05), but no significant difference in hip and ankle joints during the swing phase of gait cycle. Secondly, the difference of SCALE scores showed no statistical motional difference in knee and ankle joints during the swing phase, and showed significant motional difference in hip joints during the swing phase(p<0.05). Thirdly, there was a liner relationship between the motion of hip and ankle joints during the swing phase. Conclusion : The nature of SVMC(selective voluntary motor control) in each joints of the lower limb may reflect the ability of gait, thus SCALE may be used for assessing and for treating the cerebal palsy patients who are able to walk independently. Also we knew that the impairment of SVMC(selective voluntary motor control) increases from the proximal to the distal joints.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.3
• /
• pp.437-446
• /
• 2021

Objective : To investigate the radiographic characteristics of the uppermost instrumented vertebrae (UIV) and UIV+1 compression fractures that are predictive of revision surgery following long-segment spinal fixation. Methods : A total 27 patients who presented newly developed compression fracture at UIV, UIV+1 after long segment spinal fixation (minimum 5 vertebral bodies, lowest instrumented vertebra of L5 or distal) were reviewed retrospectively. Patients were divided into two groups according to following management : revisional surgery (group A, n=13) and conservative care (group B, n=14). Pre- and postoperative images, and images taken shortly before and after the occurrence of fracture were evaluated for radiologic characteristics Results : Despite similar degrees of surgical correction of deformity, the fate of the two groups with proximal junctional compression fractures differed. Immediately after the fracture, the decrement of adjacent disc height in group A (32.3±7.6 mm to 23.7±8.4 mm, Δ=8.5±6.9 mm) was greater than group B (31.0±13.9 mm to 30.1±15.5 mm, Δ=0.9±2.9 mm, p=0.003). Pre-operative magnetic resonance imaging indicated that group A patients have a higher grade of disc degeneration adjacent to fractured vertebrae compared to group B (modified Pfirrmann grade, group A : 6.10±0.99, group B : 4.08±0.90, p=0.004). Binary logistic regression analysis indicated that decrement of disc height was the only associated risk factor for future revision surgery (odds ratio, 1.891; 95% confidence interval, 1.121-3.190; p=0.017). Conclusion : Proximal junctional vertebral compression fractures with greater early-stage decrement of adjacent disc height were associated with increased risk of future neurological deterioration and necessity of revision. The condition of adjacent disc degeneration should be considered regarding severity and revision rate of proximal junctional kyphosis/proximal junction failures.

• Restorative Dentistry and Endodontics
• /
• v.44 no.3
• /
• pp.33.1-33.12
• /
• 2019

Objectives: To evaluate the influence of the restorative technique on the mechanical response of endodontically-treated upper premolars with mesio-occluso-distal (MOD) cavity. Materials and Methods: Forty-eight premolars received MOD preparation (4 groups, n = 12) with different restorative techniques: glass ionomer cement + composite resin (the GIC group), a metallic post + composite resin (the MP group), a fiberglass post + composite resin (the FGP group), or no endodontic treatment + restoration with composite resin (the CR group). Cusp strain and load-bearing capacity were evaluated. One-way analysis of variance and the Tukey test were used with ${\alpha}=5%$. Finite element analysis (FEA) was used to calculate displacement and tensile stress for the teeth and restorations. Results: MP showed the highest cusp (p = 0.027) deflection ($24.28{\pm}5.09{\mu}m/{\mu}m$), followed by FGP ($20.61{\pm}5.05{\mu}m/{\mu}m$), CR ($17.62{\pm}7.00{\mu}m/{\mu}m$), and GIC ($17.62{\pm}7.00{\mu}m/{\mu}m$). For load-bearing, CR ($38.89{\pm}3.24N$) showed the highest, followed by GIC ($37.51{\pm}6.69N$), FGP ($29.80{\pm}10.03N$), and MP ($18.41{\pm}4.15N$) (p = 0.001) value. FEA showed similar behavior in the restorations in all groups, while MP showed the highest stress concentration in the tooth and post. Conclusions: There is no mechanical advantage in using intraradicular posts for endodontically-treated premolars requiring MOD restoration. Filling the pulp chamber with GIC and restoring the tooth with only CR showed the most promising results for cusp deflection, failure load, and stress distribution.

• Journal of Biomedical Engineering Research
• /
• v.43 no.5
• /
• pp.308-318
• /
• 2022

The purpose of this study is to evaluate the biomechanical properties of fractured adjacent soft tissue during closed reduction after forearm fracture using the finite element method. To accomplish this, a finite element (FE) model of the forearm including soft tissue was constructed, and the material properties reported in previous studies were implemented. Based on this, nine finite element models with different fracture types and fracture positions, which are the main parameters, were subjected to finite element analysis under the same load and boundary conditions. The load condition simulated the traction of increasing the fracture site spacing from 0.4 mm to 1.6 mm at intervals of 0.4 mm at the distal end of the radioulnar bone. Through the finite element analysis, the fracture type, fracture location, and displacement were compared and analyzed for the fracture site spacing of the fractured portion and the maximum equivalent stress of the soft tissues adjacent to the fracture(interosseous membrane, muscle, fat, and skin). The results of this study are as follows. The effect of the major parameters on the fracture site spacing of the fractured part is negligible. Also, from the displacement of 1.2 mm, the maximum equivalent stress of the interosseous membrane and muscle adjacent to the fractured bone exceeds the ultimate tensile strength of the material. In addition, it was confirmed that the maximum equivalent stresses of soft tissues(fat, skin) were different in size but similar in trend. As a result, this study was able to numerically confirm the damage to the adjacent soft tissue due to the fracture site spacing during closed reduction of forearm fracture.