• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.115-121
• /
• 1982

Sodium hypochlorite solution has been widely used as endodontic irrigant due to its ability to dissolve pulp tissue debris and its antimicrobial action. This in vitro study was conducted to evaluate the solvent action of sodium hypochlorite solution on vital pulp tissue under various conditions include concentration, exposure time, and temperature. The percentage of weight loss due to pulp tissue dissolution was calculated with weight difference of lyophilized specimens before and after the exposure to test solutions. The results were as follows; Statistical analysis indicated that the ability of both 5.0% and 2.5% sodium hypochlorite solutions to dissolve pulp tissue was significantly greater than that of distilled water, but no significant difference was found between 5.0% and 2.5% sodium hypochlorite solutions. There was no significant increase in the pulp tissue dissolving ability of sodium hypochlorite solutions; as exposure time increased 2 minutes, 5 minutes, and 10 minutes. Of the given temperatures, no significant difference was found in the solvent aciton of sodium hypochlorite solution on pulp tissue between $20^{\circ}C$ (room temperature) and $37^{\circ}C$(body temperature).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.23-29
• /
• 1999

The effect of dilute sulfuric acid treatment was examined to improve recyclability of coated brokes. Turbidity , electric conductivity , and cationic demand of the white water from coated broke prepared from an alkaline base paper was determined. Sulfuric acid treatment was found to be effective in dissolving undisintegrated substances such as binders, pigments, and fibers. The properties of papers prepared by adding the broke to pulp stock up to 30% dry weight were examined . With the increase of broke addition, retention, sizing degree and smoothness were improved ; on the other hand, formation uniformness, air permeability and internal bonding strength were decreased. The extent of improvement by broke addition was greater for the surfuric acid-treated broke than the control broke. It was concluded that the use of coated broke should be limited within 10-15% weight of the product for either type of broke.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.5
• /
• pp.17-25
• /
• 2003

The influence of base paper properties and fiber type on coating penetration was studied in terms of characterization of coating holdout using two types of hand sheets as the base paper which were prepared from thermomechanical pulp (TMP) and hardwood bleached kraft pulp(KP) sized internally with alkyl ketene dimmer (AKD). Laboratory rod draw down coater was used for surface sizing and coating application. Characterization of coating penetration was done by measuring the roughness of the backside of coating layer. The backside of the coating was exposed by dissolving the fibers in a solution of cupriethylenedimine (CEO). Data show that internal sizing of base paper is effective and surface sizing is more effective to prevent coating penetration. Comparing between the two types of base papers, backside roughness of coating layer of TMP sheet is much larger and sizing is more effective to reduce coating penetration than those of KP sheet. From the result of water absorption and sizing degree after surface sizing, it seems that internal sizing slows down molecular diffusion much more than capillary penetration, but surface sizing reduces the capillary penetration. Furthermore, predominant mechanism of water into paper of TMP sheet seems to be capillary penetration, but it is molecular diffusion in the case of KP sheet.

• Polymer Science and Technology
• /
• v.8 no.5
• /
• pp.608-621
• /
• 1997

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.53-61
• /
• 2004

[ $Poly(_{D}-ldactide)\;(_{D}-PLA)$ ] was synthesized to have low molecular weight for miscible blends with a high molecular $poly(_{L}-lactide)\;(_{L} -PLA)$. The blends were prepared by dissolving the two components of $_{L}-PLA\;and\;_{D}-PLA\;(w/w)$ in chloroform (l00/0, 90/10, 70/30, 50/50, 30/70, 0/100). The miscibility of these miscible blends was characterized by gel-permeation chromatography (GPC), differential scanning calorimetry (DSC), and the selective degradability by enzymes (proteinase K, subtilisin and $\alpha$-chymotrypsin). The coating efficiency of PLA blends onto paper was determined and the degrading activity cellulases by on these blends. The miscibility, coating efficiency and enzymatic degradability of these blends were decreased according to increasing of $_{D}-PLA$ blending part. Such results were attributed to the extent of coating application of PLA, with better miscibility (compatibility), coating efficiency and degradability due to a higher $_{L}-PLA$ content.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.21-26
• /
• 2013

The influences of heat treatment and surface sizing on coating penetration were studied using two types of commercial base papers. Dry oven was used for heat treatment and laboratory rod draw down coater was used for surface sizing and coating application. Coating penetration was evaluated by measuring the roughness of the backside of coating layer. The backside of the coating was exposed by dissolving the fibers in a cupriethylenedimine(CED) solution. The results showed that both heat treatment and surface sizing were the effective methods to increase sizing degree and to reduce coating penetration.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.1-7
• /
• 2014

Dissolving part of xylan and lignin in lignocellulosic biomass by base can be used as pretreatment technique. Cork oak was pretreated with sodium hydroxide solution and the pretreatment effects were evaluated with two critical factors - NaOH concentration and pretreatment temperature. Some of xylan and lignin were removed by base pretreatment. At $90^{\circ}C$ and 13% NaOH pretreatment, 22.0% of lignin and 78.8% of xylan removed by base treatment. Enzymatic hydrolysis of cork oak which was pretreated at higher temperature or concentration was further improved. After pretreatment of cork oak with 13% NaOH at $90^{\circ}C$, the conversion rate of cellulose to fermentable sugars were reached up to 91.3%. At ethanol fermentation with enzymatic hydrolysate from different pretreatment conditions, all enzymatic saccharification liquids were well fermented by Saccharomyces cerevisiae.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.31-37
• /
• 1993

Composites of styrene polymers with woody fibers were prepared, and the effect of compatibilizers on their mechanical properties was evaluated. To improve the compatibility of wood fibers and the matrix polymers, styrene-maleic anhydride copolymer(SMA) and maleic anhydride-modified polymers were used as compatibilizers. As results, maleic anhydride-modified polystyrene and SMA were proved to improve the tensile strength of the molded composites, and also were evaluated as good compatibilizers for the wood fiber polystyrene composite. Cellulosic fiber (dissolving pulp) provided better reinforcement than lignocellulosic fiber(thermomechanical pulp). On the contrary in the case of the composite of wood fiber and acrylonitrile-butadiene styrene copolymer(ABS), SMA and maleic anhydride-modified acrylonitrile-butadiene-styrene copolymer(MABS) did not act as compatibilizers. However, MABS was evaluated as a good polymer matrix to make wood fiber reinforced composite. The tensile properties of the composites of wood fiber and MABS were superior than those of wood fiber-ABS composites.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.27-33
• /
• 2013

Manufacturing fabrics from dissolving cellulosic pulp is increasing in these days. For making high quality of cellulose-based fabrics, control of cellulose DP (degree of polymerization), its alpha cellulose content, its brightness, and its crystallinity are important. To process the cellulosic raw material, refining of cellulosic fibers is essential, and it is important to know if refining affects those important cellulose properties. The effects of PFI mill and Valley beater refining on the alpha-cellulose content, cellulose DP, crystallinity, and paper mechanical properties of wood and two different cotton fibers were studied. The results showed that PFI mill refining rarely affected those properties. Fibers refined by a Valley beater displayed a small reduction in fiber length in comparison with those refined by a PFI mill. However, the Valley beater refining method produced almost no changes in cellulose properties, either. The refining process seemed to have very little effect on the cellulose DP, crystallinity index, or alpha-cellulose content until the freeness decreased to around 300 mL CSF for wood and 100 mL CSF for cotton fibers, respectively. There were also no differences in tensile strength development in two refining methods.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.49-56
• /
• 2011

Mulching technique is used to control the temperature and moisture content of soil by covering the ground surface. Most kinds of mulching film are made of polyethylene which is non-biodegradable synthetic polymer. Utilizing these films has been one of the main sources in soil pollution. Thus residual films under the ground should be removed after a certain period of time. Therefore, an alternative mulching material made of biodegradable functional paper is considered instead of non-biodegradable films. The mulching sheet produced from paper basis has a functionality to be naturally degraded and then recycled to the bio-materials on soil. In this study, the paper based-mulching sheet coated with biodegradable polymer was specially produced using a laboratory bar coater. Coating colors prepared by dissolving PBS/PLA in chloroform were applied to kraft paper. The mechanical strength and aging properties of this mulching sheet were investigated. The burst strength of polymer-coated paper was decreased with the increase of the PBS ratio in PBS/PLA blends, and, in particular, 30/70 blending condition led to good stability in heat-aging atmosphere for 60 days.