• 제목/요약/키워드: Disposal cover

검색결과 38건 처리시간 0.023초

131I 치료입원실 폐기물 방사능 오염도 분석 및 자체처분가능일자 산출 (Determination of Self-Disposal date by the Analysis of Radioactive Waste Contamination for 1131I Therapy Ward)

  • 김기섭;정해조;박민석;정진성
    • 핵의학기술
    • /
    • 제17권1호
    • /
    • pp.3-6
    • /
    • 2013
  • Purpose: The treatment of thyroid cancer patients was continuously increased. According to the increment of thyroid cancer patients, the establishment of iodine therapy site was also increased in each hospital. This treatment involves the administration of radioactive iodine, which will be given in the form of a capsule. Therefore, protections and managements for radioactive source pollution and radiation exposure should be necessary for radiation safety. Among the many problems, the problem of disposing the radioactive wastes was occurred. In this study, The date for self-disposal for radioactive wastes, which were contaminated in clothes, bedclothes and trash, were calculated. Materials and Methods: The number of iodine therapy ward was 15 in Korea Institute of Radiological Medical and Sciences. Recently, 8 therapy wards were operated for iodine therapy patients and others were on standby for emergency treatment ward of any radiation accidents. Radioactive wastes, which were occurred in therapy ward, were clothes, bedclothes, bath cover for patients washing water and food and drink which was leftover by patients. Each sample was hold into the marinelli beaker (clothes, bedclothes, bath covers) and 90 ml beaker (food, drink, and washing water). The activities of collected samples were measured by HpGe MCA device (Multi Channel Analysis, CANBERRA, USA) Results: The storage period for the each kind of radioactive wastes was calculated by equation of storage periods based on the measurement outcomes. The average storage period was 60 days for the case of clothes, and the maximum storage period was 93 days for patient bottoms. The average storage period and the maximum storage period for the trash were 69 days and 97 days, respectively. The leftover foods and drinks had short storage period (the average storage period was 25 days and maximum storage period was 39 days), compared with other wastes. Conclusion: The proper storage period for disposing the radioactive waste (clothes, bedclothes and bath cover) was 100 days by the regulation on self-disposal of radioactive waste. In addition, the storage period for disposing the liquid radioactive waste was 120 days. The current regulation for radioactive waste self-disposing was not suitable for the circumstances of each radioactive therapy facility. Therefore, it was necessary to reduce the leftover food and drinks by adequate table setting for patients, and improve the process and regulation for disposing the short-half life radioactive wastes.

  • PDF

국내 건설폐기물 기업의 재무적 특성과 이익조정 간의 관계 - 중간처분업 특성의 조절효과를 중심으로 (Relationships between Financial Characteristics and Earnings Management in Domestic Construction Waste Disposal Companies - Focusing on the moderating effects of intermediate-level waste treatment services)

  • 현상호;이남령;이상학;김기웅
    • 한국콘텐츠학회논문지
    • /
    • 제19권12호
    • /
    • pp.68-83
    • /
    • 2019
  • 건설폐기물 기업의 중간처분업 특성은 이익조정의 여지가 큰 기업에서는 재무적 특성과 이익조정 간의 관계에서 이익조정 유인을 촉진하는 요인으로 작용하기 때문에 부정적 영향을 미칠 가능성이 크다. 이에 본 연구에서는 국내 건설폐기물 기업을 대상으로 중간처분업 특성을 고려하여 재무적 특성과 이익조정 간의 관계를 실증적으로 검증하고자 하였다. 분석결과, 건설폐기물 기업의 사업규모가 클수록, 매출채권회수기간이 긴 기업일수록 실물활동에 의한 이익의 상향조정 의도가 강하게 나타났다. 건설폐기물 기업의 영업활동 현금창출능력이 부족할수록, 에비타마진율과 영업이익률의 차이가 산업평균비율의 차이보다 낮은 기업일수록 재량적 발생액과 실물활동에 의한 이익조정이 더욱 크게 나타났다. 이러한 재무적 특성과 이익조정 간의 유의한 관계는 중간 처분업의 특성인 수주능력, 중간처리능력, 보관능력 등에 따라 그 능력이 우수한 기업 및 열악한 기업별로 다른 행태를 보였다. 본 연구는 회계분야에서 연구되고 있는 재무적 특성과 이익조정 간의 관계에 대하여 건설폐기물산업으로 그 범위를 확대하였으며, 건설폐기물 기업의 이익조정이 재무적 특성에 따라 중간처분업의 고유한 특성을 반영하여 차별적으로 실행되고 있다는 실증결과를 제시하였다는 점에서 의미가 있다.

Physio-mechanical and X-ray CT characterization of bentonite as sealing material in geological radioactive waste disposal

  • Melvin B. Diaz;Sang Seob Kim;Gyung Won Lee;Kwang Yeom Kim;Changsoo Lee;Jin-Seop Kim;Minseop Kim
    • Geomechanics and Engineering
    • /
    • 제34권4호
    • /
    • pp.449-459
    • /
    • 2023
  • The design and development of underground nuclear waste repositories should cover the performance evaluation of the different components such as the construction materials because the long term stability will depend on their response to the surrounding conditions. In South Korea, Gyeonju bentonite has been proposed as a candidate to be used as buffer and backfilling material, especially in the form of blocks to speed up the construction process. In this study, various cylindrical samples were prepared with different dry density and water content, and their physical and mechanical properties were analyzed and correlated with X-ray CT observations. The main objective was to characterize the samples and establish correlations for non-destructive estimation of physical and mechanical properties through the utilization of X-ray CT images. The results showed that the Uniaxial Compression Strength and the P-wave velocity have an increasing relationship with the dry density. Also, a higher water content increased the values of the measure parameters, especially for the P-wave velocity. The X-ray CT analysis indicated a clear relation between the mean CT value and the dry density, Uniaxial Compression Strength, and P-wave velocity. The effect of the higher water content was also captured by the mean CT value. Also, the relationship between the mean CT value and the dry density was used to plot CT dry densities using CT images only. Moreover, the histograms also provided information about the samples heterogeneity through the histograms' full width at half maximum values. Finally, the particle size and heterogeneity were also analyzed using the Madogram function. This function identified small particles in uniform samples and large particles in some samples as a result of poor mixing during preparation. Also, the μmax value correlated with the heterogeneity, and higher values represented samples with larger ranges of CT values or particle densities. These image-based tools have been shown to be useful on the non-destructive characterization of bentonite samples, and the establishment of correlations to obtain physical and mechanical parameters solely from CT images.

산업폐기물인 제지회의 활용방안에 관한 연구 (A Study on Utilization Method of Paper Ash in Industrial Waste)

  • 허열;이처근;이명원;안광국
    • 한국안전학회지
    • /
    • 제14권4호
    • /
    • pp.135-141
    • /
    • 1999
  • This study is an experimental study to investigate the possibility of the utilization of paper ash as the cover, liner in waste disposal landfill and other construction materials. The sample used in these tests was obtained from Daehan paper mill. A series of tests were peformed to evaluate basic properties, compaction, permeability, compressive strength, consolidation, leaching, and CBR of paper ash. In order to investigate the soil engineering properties of paper ash, the test results were compared with those obtained of fly ash. The results of unconfined compression tests show that paper ash had a larger strength than the fly ash. Also, the maximum dry unit weight of paper ash was approximately 59~76.9% less than that of the fly ash. It was found from the results of leaching test that paper ash is classified as non-detrimental general wastes according to the waste management law.

  • PDF

하수슬러지의 차수재 및 복토재로의 이용타당성에 관한 연구 (A Feasibility Study on the Use of Liner and Cover Materials Using Sewage Sludge)

  • 유남재;김영길;박병수;정하익
    • 한국지반공학회논문집
    • /
    • 제15권2호
    • /
    • pp.43-71
    • /
    • 1999
  • 본 연구는 하수처리장 슬러지를 사용하여 매립지의 복토재 및 차수재의 건설재료로 개발하기 위하여 수행한 실험의 분석결과이다. 하수슬러지에 그의 지반공학적 물성증진을 위하여 화강토와 화력발전소의 부산물인 플라이애쉬를 주첨가물로 사용하고 부첨가물로 시멘트 및 벤토나이트를 소정의 혼합비율로 섞어서 각각 전단강도 증진과 투수계수 감소효과를 도모하였다. 주재료인 하수슬러지와 첨가재의 혼합비율을 변화시킨 혼합물에 대하여 다양한 실내실험을 수행하여 복토재 및 차수재의 설계기준의 적합성 여부를 조사하였다. 각 주재료, 첨가재, 혼합물의 비중, 입도분석, 액\ulcorner소성한계 실험을 실시하여 기본물성을 구하고 그들이 투수성, 다짐성, 압축성, 전단강도에 미치는 영향에 대하여 분석하였다. 혼합물에 대하여 실내다짐시험을 실시하여 최대건조단위중량과 최적함수비를 구하고 현장 다짐효율성을 평가하였다. 다짐혼합시료에 대하여 변수두 투수시험을 실시하여 투수계수를 구하는 한편 변수두 투수시험을 하중제어식 압밀시험중에 병행 실시하여 그들의 압밀정수 및 투수계수를 측정하였다. 슬러지의 장기적 안정성과 관련하여 크리프실험을 변수두 투수시험과 함께 실시하였다. 한편, 한달간을 부패시킨 다짐시료에 대하여 투수시험을 실시하여 슬러지내 유기물질 부패에 의한 투수계수에 미치는 영향에 대하여 고찰하였다. 슬러지에 화강토, 플라이애쉬, 벤토나이트를 일정비율로 섞은 혼합물에 대하여 직접전단시험을 실시하여 전단강도정수를 구하였다. 시멘트와 혼합한 슬러지에 대하여 일축압축 강도시험을 실시하여 혼합비와 재령기간에 따른 압축강도 변화를 분석하였다. 한편, 다짐혼합시료에 대하여 CBR시험을 수행하여 그들의 주행성에 대한 평가를 실시하였다. 이와 같은 다양한 실험결과를 종합분석하여 매립지의 차수재 및 복토재로서 사용조건 만족여부를 검토하였다.

  • PDF

하수 슬러지 부산물을 이용한 다짐혼합재 및 토목합성수지점토라이너의 최종복토 차단층재로의 적용성에 관한 비교연구 (A Comparative Study on the Feasibility of Geosynthetics Clay Liner and Compacted Mixing Material Using By-products from Sewage Sludge to the Final Cover Materials in Landfills)

  • 정지훈;이재영;이명호
    • 한국지반신소재학회논문집
    • /
    • 제7권2호
    • /
    • pp.49-52
    • /
    • 2008
  • 현재 사용되고 있는 폐기물 매립지의 최종복토 차단층으로는 다짐점토층(Compacted Clay Liner; CCL)을 일반적으로 오랫동안 사용하고 있으나 압축성이 높은 폐기물 위에서는 시공이 어려우며, 고농도 유기물에 의한 붕괴를 유발하여 선진국 등에서 널리 사용되고 있는 부직포 등 토목합성물질 사이에 차수성이 뛰어난 벤토나이트를 삽입한 토목합성수지점토라이너(Geosynthetic Clay Liner; GCL)를 대체재로 많이 사용하고 있다. GCL은 설치 전, 후로 뚫림이 있을 수 있는 단점이 있어 CCL은 여전히 우리나라에서 널리 사용되고 있다. 하지만 CCL은 앞서 언급한 문제보다 국내의 기후 및 지형적인 여건으로 점토의 부족문제가 더 크게 작용하고 있어 그 대체물질의 개발이 시급히 요구되고 있다. 그 대체물질로 최근 슬러지가 주목을 받고 있는데 대부분의 슬러지는 매립지에 처분되거나 해양투기를 하고 있지만 2012년부터 런던협약에 따라 전면적으로 금지될 전망이기 때문에 슬러지의 친환경적인 처리 처분이 긴급히 요구되고 있는 실정이다. 이 문제를 해결하기 위한 혁신적인 방법의 하나로 열가수분해에 의한 처리기술을 들 수 있다. 본 연구에서는 부족한 양질의 점토를 대체하기 위해 하수슬러지를 열가수분해 처리하고 나온 부산물을 이용하여 첨가제를 혼합하여 최적배합비로 혼합한 다짐혼합재(Compacted Mixing Materials; CMM)를 차수능이 높은 GCL과 비교하여 CMM의 최종복토 차단층재로의 이용가능성을 평가하였다

  • PDF

건설재로서 하수슬러지 소각재의 활용 (Use of Sewage Sludge Ash for Construction Material)

  • 이처근;안광국;허열
    • 한국지반환경공학회 논문집
    • /
    • 제4권4호
    • /
    • pp.25-34
    • /
    • 2003
  • 본 논문에서는 일련의 실내실험을 통하여 하수회의 기본특성, 다짐, 압축강도, 압밀, 투수 및 CBR 특성을 분석하여 폐기물 매립장의 차수재 및 복토재 등의 건설재료로서 하수슬러지 소각재의 활용방안을 연구하였다. 특히, 하수슬러지 소각재의 치환률을 5, 10, 15, 20, 25, 30%로 변화시키면서 점토벽돌을 제작하여 품질시험을 실시하였다. 하수슬러지 소각재의 투수특성을 확보하기 위하여 혼합재로서 벤토나이트와 소석회를 사용하였다. 실험결과, 벤토나이트 혼합비가 증가함에 따라 투수계수는 감소하며 차수재로 사용가능한 투수계수가 $1{\times}10^{-7}cm/sec$ 이하로 되는 벤토나이트의 혼합비는 20% 정도로 나타났다. 일축압축시험결과 하수슬러지 소각재는 복토재의 일축압축강도 기준을 만족하는 것으로 평가되었다. 점토벽돌에 대한 품질시험 결과 하수슬러지 소각재의 치환률이 증가함에 따라 압축강도는 감소하였으며, 3종 점토벽돌의 품질기준을 만족하는 하수회의 최대치환률은 15% 정도로 나타났다.

  • PDF

지중 환경하에서의 철근콘크리트 구조물의 부식 특성 연구 (A Study on Corrosion Properties of Reinforced Concrete Structures in Subsurface Environment)

  • 권기정;정해룡;박주완
    • 지질공학
    • /
    • 제26권1호
    • /
    • pp.79-85
    • /
    • 2016
  • 방사성폐기물 처분시설 공학적방벽을 구성하는 콘크리트는 주변 환경의 영향으로 내구 수명에 영향을 받게 된다. 현재까지 개발된 수치해석 모델 및 실험을 통하여 방사성폐기물 처분시설 공학적방벽 소재로 가장 널리 사용되는 콘크리트에 대해 주변환경을 고려하여 그 영향을 살펴보았다. 본 연구에 해당하는 철근 콘크리트 구조물은 지리적으로 해안과 인접한 지하수 포화대에 위치하고 있다. 일반적인 철근콘크리트 구조물의 가장 민감한 열화인자인 염해에 의한 철근부식에 대한 영향을 염화물 확산모델을 이용하여 평가한 결과 철근 부식 개시기간이 1,284년이며, 최종적으로 구조물이 내구수명을 상실하는데 도달하는 시간은 1,924년인 것으로 예측되었다. 또한, Mock-up 실험을 통해 공극분포, 공극률, 부식정도 등 물리화학적 특성을 평가한 결과 콘크리트 내 철근 부식정도는 미비한 것으로 나타나 500년 이상의 상당히 오랜 기간 건전성을 유지할 수 있는 것으로 판단된다.

심지층 처분시스템 설계를 위한 사용후핵연료 현황 분석 및 예측 (Current Status and Projection of Spent Nuclear Fuel for Geological Disposal System Design)

  • 조동건;최종원;한필수
    • 방사성폐기물학회지
    • /
    • 제4권1호
    • /
    • pp.87-93
    • /
    • 2006
  • 제2차 전력수급기본계획에 의거 2017년까지 계획된 원자로만을 대상으로 심지층 처분시스템 설계 시 필요한 국내 사용후핵연료의 발생량, 제원적 특징, 초기농축도 및 방출연소도 등에 대하여 현재 및 미래 현황을 파악하고 예측하였다. 2057년까지 PWR 및 CANDU 사용후핵연료 발생량은 각각 20,500 및 14,800 MTU로 나타났다. 초기 농축도에 대해서는 4.5 wt.% 이하를 갖는 사용후핵연료가 96.5%를 차지하는 것으로 나타났다. 사용후핵연료의 평균 방출연소도는 90년대 후반에는 36 GWD/MUT 전도, 2000년대 초반에는 40 GWD/MTU를 나타냈으며, 2000년대 중 후반부터는 45 GWD/MTU가 될 것으로 나타났다. 광범위한 분석 및 예측 결과, 총 처분물량을 대표할 수 있는 가상적인 기준 사용후핵 연료는 16 6 한국표준형연료, 단면적 $21.4cm\times21.4cm$, 길이 453cm, 무게 672 kg, 초기 농축도 4.5 wt.%, 방출연소도 55 GWD/MTU로 나타났다.

  • PDF

제지슬러지 소각재를 활용한 토양 표면 경화형 멀칭소재 개발 (Development of Soil Surface Hardening Mulching System by Using Paper Mill Sludge Ash)

  • 김동성;성용주;조흥열
    • 펄프종이기술
    • /
    • 제46권4호
    • /
    • pp.85-92
    • /
    • 2014
  • The disposal of the paper mill sludge and the paper mill sludge ash become more important issue, because the environment regulation becomes more strict. In this study, the new mulching system was developed by using the paper sludge ash. The soil surface hardening mechanism for mulching with paper sludge ash, red clay and coal ash was evaluated. Since the CaO in the paper sludge ash provided the harden structure with water, the surface hardening mulching structure could cover the field surface and prevent the germination of weeds. More than 50 w.t.% of red clay and 10 w.t.% of paper sludge ash were required to create the solid soil surface structure for mulching. The field test with the new soil surface hardening mulching system for three months showed the generation of weeds could successfully be inhibited by the system.