• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.907-910
• /
• 2003

We have developed Logic Design Training Kit for studying, actual training, designing of FPGA(Xillinx) or CPLD(ALTERA CPLD), the Digital Logic Device. This training kit has 12 matrix keys, RS232 port for serial communication and uses LED array. six FND(Dynamic), LCD as display part. That is standard specification for digital logic training kit. Special point of this kit is that we make two logic device trainig kit. This two logic device kit have more smaller and simple architecture because only uses one chip. That chip already includes a lot of functions that need for training kit, such as : complex logic circuit needed the two kind of logic devices, 16 way of system clock deviding function, serial communication interrupt....etc. We called that one chip is Center Bridge Chipset ; Xillinx FPGA Spartan2. User can select between using one device of FPGA or CPLD, or uses both them. Because of, Center Bridge Chipset has profitable architecture. it can work as Logic Device's networking with Master-Slave connection When using both logic devices.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.2
• /
• pp.1-21
• /
• 1989

The computer can be used to display a continuously updated list or plot of vessel position. The computer that accept input data from a number of different navigation systems, e.g., Loran , Satnav, Radar, Decca, Compass, Sextant with electrical output etc., can compute the position of a vessel relative to prerecorded objects. The celestial navigation system requires the computer to do not much calculation. Calculation are for trigonometeric, linear systems, finding roots of nonlinear equation and least square estimation etc, . In order to computerize the celestrial navigation system, these calculations must be programmed. The purpose of this thesis is to study the formulation, the design and the test of calculations of the coordinates of celestial bodies, the altitude correction and the solution of the navigational triangle processes.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.1
• /
• pp.31-49
• /
• 1998

The technology of navigational instruments and the profession of going to sea have entered a time of dramatic change. A paradigm shift is taking place which will eventually make the industry unrecognizable to those who first went to sea only twenty years ago. This change is most emphatically seen in three areas: Automatic Identification System(AIS), Electronic Chart Display and Information System(ECDIS), and Voyage Data Recoreder(VDR). In order to make these new instruments to be fitted on board commerical ships, international requirements for enhacing the safety of navigation on the world's waterways, the Chapter V of International Convention for the Safety of Life at sea, 1974 as ameded(hereinafter referred to as "SOLAS"), are being also changed.o changed.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3162-3164
• /
• 1999

In this paper, a temperature compensating system(TCS) for LPG dispenser has been developed. A TCS includes a processor(80C196) with an AID converter. I/O port(82C55) and 6-digit vacuum fluorescent display. Based on encoding signals from the gas flow meter, different calibration values from each apparatus and temperature compensating values from the temperature sensor, the TCS controls the LPG dispensing quantity with switching on or off the solenoid valves. The temperature compensation is performed with analog-to-digital conversion of the temperature sensor. The resolution of temperature compensation is nearly $0.5^{\circ}C$ using 10-bit ADC. The field test of the TCS shows the exact temperature compensation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.82.3-82
• /
• 2001

This work presents a design technique for the implementation of the liquid level control system by based on the use of a single-chip microcontroller. The proposed model system offers the following attractive features : (1) application of the pressure transducer for sensing the height of liquid in tank (2) using the obtained liquid level for defining on-off condition of the water pump (3) the liquid values were controlled by using stepping motors for controlling of 57 points (4) can set up by using manual control or automatic control (5) can monitor and display the process status either on microcontroller-based control board or on the computer via RS232 serial-port. Experimental results have been employed to show the effectiveness ...

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.461-468
• /
• 2020

This study examined how national research and development (R&D) in the domain of logistics has changed recently in the Republic of Korea. We conducted basic statistical analysis and social network analysis on 5,327 logistics-related R&D projects undertaken during 2005-2019. Data for performing these analyses were collected from the R&D database of the National Science and Technology Information Service (NTIS). By constructing a co-occurrence matrix with keywords, we conducted degree and betweenness centrality analysis and visualized the network matrix to display a cluster map. This study presents our observations related to the following findings: (1) the chronical trends of logistics R&D, (2) focused fields of logistics R&D, (3) the relations among keywords, and (4) the characteristics of logistics R&D. Finally, we suggest policy implications to boost and diversify logistics R&D.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.423-429
• /
• 2017

As invigoration plan of the marine tourism, Busan City has the plan to operate the cruise ship inside of the harbor, but the area has narrow water way with heavy traffic. As a result it is requested to evaluate the safety for the preparation of actual navigation. In this study, the Ship Handling Simulation (SHS) Assessment was conducted, which is regulated by the Maritime Traffic Safety Audit Scheme (MTSAS) in compliance with the Marine Safety Law and the Maritime Traffic Risk Assessment System based on the Electronic Chart Display and Information System (ECDIS). The proximity assessment, control assessment and subjective assessment were implemented, which is enacted by the Marine Safety Law by using the SHS. In the case of proximity assessment, the probability of trespass was not analyzed. As the control assessment, the swept path was measured at 11.7 m and 11.5 m for port entry and port departure respectively, which exceeded the width of the model vessel, 10.4 m over; it was considered as a marginal factor. As a result of the subjective evaluation of the navigator, there would be no difficulty on ship maneuvering by paying particular attention to the mooring vessel nearby the Busan Bridge and Yeongdo Bridge as well as the coming vessel from the invisible sea area when the vessel is entering and departing the port. The Marine Traffic Risk Assessment System analyzed as [Cautious] level until the vessel passed the Busan bridge and the curved area at 5 kts and it became to [Dangerous] level from where it left 75 m to the Busan Bridge. When the vessel passed the Busan Bridge and the curved area at 10 kts and entered the narrow area, it indicated the [Dangerous] level and became to [Very dangerous] level from where it left 410 m to the Busan bridge. In conclusion, the vessel should maintain at the speed of 5 kts to reduce the risk when it passes this area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.841-850
• /
• 2019

The Korean government has designated speed-limit zones and speed limits in 19 ports and 3 routes to ensure safe navigation and transportation. However, the speed limit differs from port to port, no practical means of management exist. This often leads to violation of the speed limit. Additionally, ship collisions due to human error continue to occur. First, the study analyzed marine accidents that occurred at trade ports and fairways. The result of the analysis revealed the occurrence of 1344 accidents (average 269 cases per year) from 2014 to 2018. Five hundred sixty three accidents involved fishing boats, whereas, merchant vessels were involved in 508 cases. Second, the efficacy of the application of voice and message warnings to GPS plotters and electronic chart display and information system (ECDIS) was reviewed, and these were proposed as measures to inform vessel operators of the hazards of speed limit violation. Third, experts' opinions from relevant agencies and navigation system manufacturers were consulted and it was found that the proposed warning function was technically implementable. The findings are expected to help reduce human error among ship operators and establish a Korean e-navigation system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.145-147
• /
• 2010

This study is the visually emotional identification lighting for easy to distinguish using 3colors LED on AtoN facility in shore and harbor, which have realized a controller for certainly express the mouth of a harbor by red light and green light of both sides a harbor and for synchronization at a time of right and left or serial sequential the harbor guidance light through synchronizer or timer by GPS. There is expectation effect that is prevent a confusion about distinguish of facility by ship's operator and to beautify a night scene of harbor, which is expressed to emotional identification lighting differ from great many lighting of harbor with variable color lighting the lighthouse body and vertical layer color lighting using LED. The function of AtoN is adapted that guidance light through synchronization or serial sequential lighting and display of harbor safety message by CW lighting, and this system is the power consumption greatly reduce by candle alternated high light LED.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.139-142
• /
• 2010

ENC(Electronic Navigational Chart) is an electronic chart that digitize nautical chart including all kinds of information of nautical chart. Mariners have difficulty reading information because of clutter problem if display scale of ECDIS is lower than compilation scale of ENCs. IHO made SCAMIN improvement model included in S-65 Standard to settle this ENC clutter problem. This SCAMIN model includes both simple restriction that should safety some requirement and share geographic information. and hard restriction that should overlap with area object such as depth area, land area, dredge area. It also apply SCAMIN step of sounding value according to importance of safety navigation. In this paper, we analyzed the restrictions for SCAMIN model of S-65 Standard, developed algorithm and application to apply theses restrictions reasonably and mechanically. Also we applied this algorithm and application to Korea ENCs and evaluated the result of performance.