• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.309-313
• /
• 2006

We demonstrated 2.2inch qqVGA AMOLED display drived by ultra low temperature poly-Si (ULTPS) TFT not transferred but direct fabricated below $200^{\circ}C$. Si channel was crystallized by decreasing impurity concentration even at room temperature. Gate insulator with a breakdown field exceeding 8 MV/cm was realized by Inductively coupled plasma - CVD. In order to reduce stress of plastic, organic film was coated as inter-dielectric and passivation layers. Finally, ULTPS TFT of which mobility is over $20cm^2/Vsec$ was fabricated on transparent plastic substrate and drived OLED display successfully.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.23-23
• /
• 1998

High resolution field emission dispplay(FED) devices of 5 inch diagonal in size are fully developped for the applications of near-future flat ppanel dispplays. Under the unique gate-switching drive scheme electron trajectory pprofiles are simulated and tested by considering leakage effects of each ppixel. Uniquely-pprinted sppacer with high asppect ratio are fabricated on real ITO glass for high vacuum ppackaging. In addition new gas aging scheme of stabilizing field emitting array are extensively investigated during the sealing and exhausting pprocess in order to pprevent oxidation effects on the micro tipp. Finally fulll color images of 64 gray scale will be demonstrated.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.145.2-145
• /
• 1998

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.830-833
• /
• 2006

In this work, we provided a novel test method to verify the sealing materials for flexible LCD cell. The ultraviolet type curing sealing material with low process temperature was suitable for LCD cell assembly. We also proposed the sealing materials which passed 13200 times bending test within 20 mm curvature.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.381-385
• /
• 2016

Recently, white LEDs, especially, warm white LEDs have been intensively investigated due to outstanding optical properties, long term stability and low power consumption. In this study, mixed type and patterned type of remote phosphors were prepared by screen printing process employing green and red phosphor. Each type of remote phosphor exhibited distinctive photoluminescence spectrum. For example, the mixed type of remote phosphor exhibited unique spectrum, while the patterned type showed expectable spectrum depending on the concentration of phosphors. This indicates that a small amount of red phosphor dramatically reduced the green photoluminescence in the case of mixed-type remote phosphor, whereas the effect was negligible in the patterned-type remote phosphor. The possibility of undesirable chemical reaction was further investigated by using scanning electron microscopy and X-ray diffraction.

• Korean Journal of Materials Research
• /
• v.26 no.1
• /
• pp.22-28
• /
• 2016

In this study, we fabricated high quality color conversion component with green/red phosphor and low melting glass frit. The color conversion component was prepared by placing the green and red phosphor layer on slide glass via screen printing process. The properties of color conversion component could be controlled by changing coating sequence, layer thickness and heat treatment temperature. We discovered that optical properties of color conversion component were generally determined by the lowest layer. On the other hand, the heat treatment temperature also affected to correlated color temperature (CCT) and color rending index (CRI). The color conversion component with a green (lower) - red (upper) layer which was sintered at $550^{\circ}C$ showed the best optical properties: CCT, CRI and luminance efficacy were 3340 K, 78, and 56.5 lm/w, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.771-774
• /
• 2009

The Improved stability of organic light emitting diodes (OLEDs) containing lithium-quinolate (Liq) as the ETL doping material is investigated. The lifetime could be improved by threefold using the Liq-doped ETL structure. The improvement was attributed to the Liq-doped ETL, which improved hole-electron balance and has a good electrical stability. Additionally, when the Liq doped device was combined with an Mg/Al cathode, the OLED produced a longer lifetime than other device.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.77-81
• /
• 2019

Recently, Korea has been making efforts at the government level to overcome the national crisis that Japan's dependency on technology in the semiconductor and display materials sectors has also escaped due to export regulations on three materials carried out by Japan. Therefore, based on the data of the National Science & Technology Information Service (NTIS) operated by the government, we analyze the trend of R & D investment in the display field, thereby improving R & D to improve material technology competitiveness in the future. Let's examine the implications of investment. A total of 5 years of new research and development investment in the field of display was invested as basic research fund for 25%, 15% for applied research, and 53% for development research. In terms of development cost and development period, the basic research showed that the amount of money and the development period were shorter than that of applied research. In other words, the basic research accounted for 25% of the R & D investment and the average R & D period was only 3.2 years. As we can see from the recent development of H fiber carbon fiber, which was recently developed and entered full-scale production, we were able to succeed because of the benefits of government support for 10 years while giving the same material title differently. In order to escape from Japan's technological dependence on semiconductor and display materials in Korea, As such, basic research in the field of materials is only possible when long-term research is conducted.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1040-1043
• /
• 2009

a-IGZO is an attractive material to make an AMOLED device with uniform TFT properties for use in a large size display. However, this material shows TFT properties that are very sensitive to water or hydrogen. Therefore, it is essential to control these critical factors during fabrication of the backplane in order to improve the TFT performance. In this paper, we report the effect of passivation layer properties on the performance of the oxide TFTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.823-826
• /
• 2008

Phosphate glass added the various alkali additives is one of the substitutive materials for the barrier-ribs in plasma display panel. The results of differential thermal analysis and coefficient of thermal expansion show that the alkali oxides affect the thermal properties of phosphate glass.