• 한국환경과학회지
• /
• 제18권5호
• /
• pp.509-515
• /
• 2009

The aim of this study is investigated greenhouse gas emissions of glass industry, and when calculates greenhouse gas emission, using formula(Tier 3) advising in IPCC(Intergovernmental Panel on Climate Change) and using self designed formula(Tier 3+) authors of this study. Studied to propose calculation formula that can compare these two calculation results and apply to domestic. Formula of Tier 3 calculated to theoretical composition of carbonate material, And Formula of Tier 3+ calculated on the basis of chemical substance formation table that get from glass manufacture company(The S company). As a result, Dolomite, Soda ash, Limestone, Industrial Barium carbonate is calculated value of Tier 3+ lower than value of Tier 3, And Industrial Potassium carbonate, Industrial Strontium carbonate was calculated value of Tier 3 lower than value of Tier 3. This study finding, formula of Tier 3+ has higher confidence than formula of Tier 3 when consider revision about purity of injection raw material. And hereafter, When calculate greenhouse gas emissions about nonmetallic mineral industry, use of Tier 3+ is considered that should be encouraged.

• 공학교육연구
• /
• 제7권3호
• /
• pp.32-38
• /
• 2004

본 논문에서는 한동대학교 전산전자공학부와 LG전자의 산학협동 사례를 통해 기존의 연구중심의 산학협동 모델에서 탈피한 교육중심의 새로운 모델을 제시한다. 이 교육중심 산학협동 모델에서는 전통적인 관심이었던 연구 프로젝트의 성공이나 새로운 공학기술의 개발 대신에 현장에서 경쟁력 있는 교육을 제공함으로써 우수한 인력을 기업에 공급하는 것을 기본적인 목표로 하고 있다. 본 논문에서는 이 모델을 통해 기업과 학교 그리고 수요자인 학생 등 모두에게 긍정적인 효과를 기대할 수 있다는 점을 밝혔으며, 이 모델에서의 핵심 프로그램인 수요자 중심의 공동교과과정에 대해서 개발과정 및 운영내용을 살펴보고 현재 상황에서의 평가 결과를 제시한다.

• 공학교육연구
• /
• 제11권2호
• /
• pp.65-78
• /
• 2008

오늘날 산학 협력은 기업과 학계 상호간의 발전을 위해 매우 중요한 역할을 담당하고 있다. 기업은 학교 연구 기관의 우수한 자원과 시설을 충분히 이용하여 새로운 제품 개발을 위한 기술을 얻을 수 있는 이점이 있고 학교는 기업 현장의 실제적인 문제에 대한 연구를 시행함으로써 이론적 연구의 실제적 적용이라는 성과를 가질 수가 있다. 그러나 대부분의 산학 협력모델은 주로 대학원 연구 기관과 기업 프로젝터 중심에서 이루어지고 주로 연구 프로젝터의 형태를 띠고 있거나 학생들의 취업을 위한, 현장실습, 기업 현장 인력 보수 교육이 주를 이루고 있다. 하지만 공학 교육의 큰 주체라고 할 수 있는 학부 단위의 교육 과정과는 다소 거리가 있는 것이 현실이며 그러한 학부 단위의 산학 협력 모델은 구축하기에 있어 프로그램의 기획, 재정, 기업의 무관심과 같은 여러 가지 제약이 따르는 것이 현실이다. 이에 본 논문은 기존의 산학 협력 혹은 기업 공모전과는 색다르게 전개 되고 있는 LG 전자 디지털 디스플레이 본부에서 시행 하는 디스플레이 아이디어 공모전을 소개하고 이를 통하여 기업과 학교의 효용성과 국내에서 새로운 산학 협력 모델을 제시 하고자 한다.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.413-419
• /
• 2011

Corporate governance is a system articulating the division of responsibilities among different company members, and defining the running rules and procedures for making decisions on corporate affairs. The separation of ownership and management in modern enterprises brings agency problems to the company shareholders, and it is wildly believed that good practice on corporate governance is essential to prevent managers from taking actions by which profiteering their own benefits but compromising the interests of shareholders. This research investigates the level of companies' compliance with the corporate governance codes to find whether significant differences in corporate governance practice exist between the listed construction companies and the national leading companies in Taiwan. Further exploration focuses on the correlation between the compliance level and the industrial features. The investigation finds that: (1)Construction companies display lower levels of corporate governance compliance; (2)Construction companies display lower levels of structural board independence and respect for stakeholders; (3)Compliance levels of construction companies are correlated with the number of employees and the ownership concentration; (4)Compliance levels of the whole sample companies are correlated with the factors representing firm size, such as turnover, capital and number of employees, but are independent of profitability as well as stock price volatility. The above empirical evidence characterizes the features of corporate governance in Taiwan listed construction companies, including: (1)Large companies lurking high risk of agency problems have more willingness to conduct corporate governance and meanwhile can afford higher costs for the conduction, so that their compliance level would be higher than smaller companies; (2)Construction companies in Taiwan have higher ownership concentration, on account of the industrial tradition of family business, and therefore pay less attention to the compliance with structural board independence and respect for stakeholders. However, the conclusions indicate that further studies are essential to clarify whether the above disparities would lead to a negative cycle of corporate governance practice in construction industry. The benefits of corporate governance should unfold more evidently to convince construction companies for improving their investment environment and stimulating their healthy growth.

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.1589-1594
• /
• 2013

V.M.D는 모든 공간과 환경 및 시각적 자극요인을 다루며 건축물의 외관뿐만 아니라 인테리어, 그래픽 사인물, 윈도우 디스플레이, 레이아웃, 매장내의 집기, 조명, 판매원의 외모 접객 태도까지 포함된다. 좋은 품질과 디자인이 훌륭한 상품을 매장에 진열 했으나 고객이 매장에 방문하지 않는다면 상품 판매는 이뤄지지 않는다. V.M.D는 상품을 고객이 매장 안으로 이끌 수 있게 진열하기 위하여 다양한 연출을 하여 브랜드 이미지를 높이며 지속적으로 고객 유치를 위한 모적을 두었다. 과거 화려하고 고급스런 인테리어를 통하여 디스플레이만 강조하던 개념에서 탈피하여 상품을 논리적이고 체계화된 방식으로 진열하여 소비자에게 구매를 유도하며 정보를 제공하고 매장의 환경을 디자인함으로 고객의 머릿속에 브랜드 이미지를 심어주는 것이다. 본 연구는 매장 내에 설치된 V.M.D소비자 선호도를 분석하여 향후 지속적으로 전개될 통신업계 대리점 디스플레이의 바람직한 매장 V.M.D조건을 제시하고자 한다.

• Journal of Preventive Medicine and Public Health
• /
• 제52권4호
• /
• pp.265-271
• /
• 2019

Objectives: The Samsung Ombudsperson Commission was launched as an independent third-party institution following an agreement among Samsung Electronics, Supporters for Health and Right of People in Semiconductor Industry (Banolim in Korean, an independent NGO), and the Family Compensation Committee, in accordance with the industry accident prevention measure required by the settlement committee to address the issues related to employees who allegedly died from leukemia and other diseases as a result of working at Samsung's semiconductor production facilities. Methods: The Commission has carried out a comprehensive range of activities to review and evaluate the status of the company's occupational accidents management system, as well as occupational safety and health risk management within its facilities. Results: Based on the results of this review, termed a comprehensive diagnosis, the Commission presented action plans for improvement to strengthen the company's existing safety and health management system and to effectively address uncertain risks in this area going forward. Conclusions: The Commission will monitor the execution of the suggested tasks and provide advice and guidance to ensure that Samsung's semiconductor and liquid crystal display production lines are safer.

• 유통과학연구
• /
• 제13권7호
• /
• pp.41-51
• /
• 2015

Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

• 한국실내디자인학회논문집
• /
• 제24권6호
• /
• pp.22-29
• /
• 2015

The purpose of this study is to investigate the details of the overall interior design of the department store supermarket retail space, interior design and development, seeks to help change. In this study, a range of research the department store supermarket located in the major department store. Since 2012, new construction or renewal has been done in a department store, was investigated by selecting a total of five locations of two places in the premium supermarket. Conclusions are as followings ; First, In-store merchandising strategies, store configuration strategy, product mix strategies, and the layout plan considering the advanced strategies. Secondly, the interior guidelines are, (1)VP should be planned as an expression of a company or brand management strategies to visualize a concept image of product planning stages of merchandising to entering the store to induce curiosity to customers. (2)PP is by planning purposes, the use of lighting, directing structure, color harmony, by utilizing such as props and small parts must be able to attract attention. (3)IP is the customer to organize display, depending on the type of the display items to facilitate fraud, and the fixture plan in association with it, the customer selects a product must induced to purchase.

• 대한산업공학회지
• /
• 제41권1호
• /
• pp.25-33
• /
• 2015

From the viewpoint of applications to manufacturing, data mining is a useful method to find the meaningful knowledge or information about states of processes. But the data from manufacturing processes usually have two characteristics which are multicollinearity and imbalance distribution of data. Two characteristics are main causes which make bias to classification rules and select wrong variables as important variables. In the paper, we propose a new data mining procedure to solve the problem. First, to determine candidate variables, we propose the multiple hypothesis test. Second, to make unbiased classification rules, we propose the decision tree learning method with different weights for each category of quality variable. The experimental result with a real PDP (Plasma display panel) manufacturing data shows that the proposed procedure can make better information than other data mining procedures.

• 유통과학연구
• /
• 제10권9호
• /
• pp.13-21
• /
• 2012

Purpose - Korean traditional markets are falling behind the times, because they have not met the demands of social changes including: an overall improvement in standards of living, shift in purchasing form and propagation of cars. It is one of the most indigenous and conventional foods of Korea, taking a seat far in the corner of Korean traditional culture. Research design / data / methodology - Korean traditional rice cakes however have their limits. They are produced and sold by independent shop owners who cannot compete with the brand power of franchise organizations. The leadership of adminstration is needed for these shop owners particularly in visual merchandising related to interior design and display. Results - Additionally, the advent of major company-run rice cake cafe adds fresh fuel to the problem in addition to small but luxurious packaging. Small business owners need packaging technology for overall quality improvement of sales of rice cakes. Additional help is needed with the mode of packing to promote sales and win consumer confidence. Conclusions - Further assistance with marketing for seasonal displays is needed as well as teaching business owners how to read graphic data. Regular specialized education for visual merchandising of rice cakes could help independent market owners win the competition against franchise-based organizations.