• Advances in nano research
• /
• v.6 no.1
• /
• pp.21-37
• /
• 2018

In the present article, wave dispersion behavior of a temperature-dependent functionally graded (FG) nanobeam undergoing rotation subjected to thermal loading is investigated according to nonlocal strain gradient theory, in which the stress numerates for both nonlocal stress field and the strain gradient stress field. The small size effects are taken into account by using the nonlocal strain gradient theory which contains two scale parameters. Mori-Tanaka distribution model is considered to express the gradually variation of material properties across the thickness. The governing equations are derived as a function of axial force due to centrifugal stiffening and displacements by applying Hamilton's principle according to Euler-Bernoulli beam theory. By applying an analytical solution, the dispersion relations of rotating FG nanobeam are obtained by solving an eigenvalue problem. Obviously, numerical results indicate that various parameters such as angular velocity, gradient index, temperature change, wave number and nonlocality parameter have significant influences on the wave characteristics of rotating FG nanobeams. Hence, the results of this research can provide useful information for the next generation studies and accurate deigns of nanomachines including nanoscale molecular bearings and nanogears, etc.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.15-18
• /
• 2004

Nondestructive damage sensing and mechanical properties for thermal treated carbon nanotube(CNT) and nanofiber(CNF)/epoxy composites were investigated using electro-micromechanical technique. Carbon black (CB) was used only for the comparison. Electro-micromechanical techniques were applied to obtain the fiber damage and stress transferring effect of carbon nanocomposites with their contents. Thermal treatment and temperature affected on apparent modulus and electrical properties on nanocomposites due to enhanced inherent properties of each CNMs. Coefficient of variation (COV) of volumetric electrical resistance can be used to obtain the dispersion degree indirectly for various CNMs. Dispersion and surface modification are very important parameters to obtain improved mechanical and electrical properties of CNMs for multifunctional applications. Further optimized functionalization and dispersion conditions will be investigated for the following work continuously.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.371-376
• /
• 2015

Magnetite nanoparticles were synthesized by adding excess ammonium hydroxide to a solution of iron (II) and (III) chlorides. The surfactants of oleic acid and Span 80 were applied in sequence to the magnetic particles as a combined stabilizer, and poly-${\alpha}$-olefin (PAO) 30 or 60 was used as the liquid base with a low or high viscosity, respectively. The ferrofluids were prepared with the concentrations of 200, 300, 400, and 500 mg/mL, and characterized by density, dispersion, magnetization, and viscosity. The density of the fluids increased proportionally to the concentration from 0.98 to 1.27 g/mL and 1.01 to 1.30 g/mL with PAO 30 base and PAO 60 base, and the dispersion stability was 77-95 and 81-74% for the PAO-30 and PAO-60-based fluids, respectively. The observed saturation magnetization values of the PAO-30 and PAO-60-based ferrofluids were 16 to 42 mT and 17 to 41 mT with the concentration increase in the range 200-500 mg/mL, respectively, depending upon the content of magnetic particles in the fluid. The viscosity variation of the PAO-30 and PAO-60-based ferrofluids in the temperature range $20-80^{\circ}C$ was the least with the concentrations of 400 and 300 mg/mL, respectively.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.520-524
• /
• 2004

As a feasibility study for the application of carbon nanotubes to the treatment of environmental pollutants, the adsorption characteristics of humic acid on carbon nanotubes has been investigated. The dispersion features of carbon nanotubes in aquatic environment were investigated by measuring the variation of their electrokinetic potentials with pH, and the effects of some dispersants on their dispersion features were also examined. Under the experimental conditions, humic acid was observed to mostly adsorb on nanotubes within a few minutes and reach the equilibrium state within about one hour. The adsorption features of humic acid on nanotubes were found to follow the Freundlich model better than the Langmuir Model. Humic acid adsorbed on carbon nanotubes endothermically and the change of enthalpy in adsorption reaction was estimated to be ca. 18.37kJ/mol at standard state. The entropic change in adsorption reaction for humic acid was ca. 0.0503kJ/mol at standard state and the activation energy for adsorption was also estimated based on the change of rate constants with temperature. FT-IR investigations showed that the functional groups such as alcohol, ester, and aromatics existing in the chemical structure of humic acid might work as the bridge in its adsorption on nanotubes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.9-13
• /
• 1995

The effect of WO$_3$ addition and sintering condition on the electrical properties of SrTiO$_3$ceramic have been investigated. Resistivity and capacitance of grains and grain boundaries were obtained by applying impedance spectroscopy. From the result it could be concluded that the temperature dependance of capacitance of WO$_3$doped specimens were influenced directly by the variation of grain boundary capacitance. It was also found that the dispersion frequency increased as the degree of reduction of the specimen increased. The dispersion frequency characteristics showed discernably that the resistivity of the specimen varied with WO$_3$ content. The dielectric properties were influenced directly by the reduction of the specimens. The dielectric constant of grain boundaries of BL capacitor could be obtained by Cole-Cole plot and was influeneced by the amount of WO$_3$ added.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.215-219
• /
• 2005

Liquefied petroleum gas (LPG) has been used as motor fuel due to its low emissions and low cost. A liquid direct injection system into a cylinder was suggested as a next generation system to maximize a fuel economy as well as a power. This study addresses the analysis of the LPG spray injecting from single hole injector. Two different test conditions are given, which are a fully developed spray case with various injection pressures and a developing spray case with ambient pressure variation. The LPG spray photographs are compared with the sprays of gasoline and diesel fuel at the same conditions, and the spray angles and penetration lengths are also compared, and then the spray behavior is analyzed. The LPG spray photos show that the dispersion characteristic depends very sensitively on the ambient pressure soon after injection. The spray angle is very wide in a low ambient pressure condition until the saturated pressure, but the angle is quickly reduced at the condition over the pressure. However, the down stream of the LPG spray shows much wider dispersion and less penetration than those of gasoline and diesel sprays regardless ambient pressure condition.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.449-455
• /
• 1997

A theoretical study is presented for the prediction of the scattering of obliquely incident plane acoustic wave by transversely isotropic cylindrical shells immersed in water. In dorder to illustrate the vailidity of the theory backscattering form functions are compared with the existing results for degenerated problems: the catterings by isotropic shell and transversely isotropic solid cylinder. The unidirectional fiber reinforced boron-aluminum composites are selected as a model of transversely isotropic materials having potential applications in practice. From the resonant scattering analysis of the partial backscattering form functions, the dispersion curves for fluid-borne Stoneley wave, guided wave along the shell, and the lowest three Lamb type waves can be found. The Lamb type dispersions are compared with those of the flat plate. The variation of anisotropy significantly affects the properties of circumferential waves. From these results, it can be possible to identify parametrically the material properties of anisotropic cylindrical targets.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.5
• /
• pp.33-40
• /
• 2002

The purpose of this study is to find the variation of sedimentation patterns after Saemangeum reclamation. Residual flow after Saemangeum reclamation was calculated prognostically from the observed water temperature and salinity data in May 1992 by the Marine Development Institute of Gunsan National University and wind data which were obtained from spring 1969 through winter 1977 by the Kunsan Meteorological Observatory. Three dimensional movements of injected particles due to currents, turbulence and sinking velocity are tracked by the Euler-Lagrange method. When suspended sediments with the size of soil grain of 30 ㎛ are injected in the Sinsi drainage sluice, their dispersion range of sediment is around Gogunsan islands. When suspended sediments with the size of soil grain of 200 ㎛ are injected in the Garyeok drainage sluice, their dispersion range of sediment was around the Garyeok drainage sluice and Byeonsan coastal area.

• Journal of the Korean Applied Science and Technology
• /
• v.7 no.2
• /
• pp.41-45
• /
• 1990

A Stability to the dispersion solvent, which is acetonitrile, dichloromethane, benzene, chloroform and acetonitrile-benzene(1:1,v/v) of {N-docosyl pyridinium)-TCNQ(1:2)complex was investigated by U.V Spectrophotometer and was confirmed stabilized on acetonitrile, the dichloromethane and acetonitrile-benzene (1:1,v/v) for seven hours. Using $CdCl_2$buffer solution as subphase for LB films deposition, it was achived successively to fabricate the Y-type LB films of (N-docosyl pyridinium)-TCNQ(1:2)complex. For the sake of verifying the deposition of LB films, U.V is measured by variation of nominal layer number.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.4
• /
• pp.263-271
• /
• 2000

To investigate the distribution of air pollutants dispersion in the horizontal wind fields, a chaff release experiment was carried out by an airplane. The temporal and spatial variations of a chaff plume from an elevated point source using the WSR-88D(NEXRAD) radar. The observed profiles of radar reflectivity were compared with the Gaussian diffusion model at slightly unstable atmospheric condition. The present study shows that the distributions of radar reflectivity from chaffs and their concentration by the model are in general agreement with time variation. The dispersion coefficients in downwind($\sigma$(sub)x) and crosswind($\sigma$(sub)y) spread data exceeded what has generally been found at Pasquill and Brigg\`s estimates. As a result, it was clearly shown that horizontal and vertical diffusion coefficients are more accurately determined as compared with theoretical coefficients. At longer diffusion distances(than 10km), a radar observation provided the determination of maximum range and diffusion height more qualitatively, too.