• Structural Engineering and Mechanics
• /
• 제72권5호
• /
• pp.597-615
• /
• 2019

The paper studies the dispersion of the axisymmetric longitudinal wave propagating in the "hollow cylinder + surrounding medium" system with inhomogeneous initial stresses caused by the uniformly distributed radial compressional forces acting at infinity. Up to now in the world literature, there exist only a few investigations related to the wave dispersion in a hollow cylinder with inhomogeneous initial stresses. Therefore, this paper is one of the first attempts in this field in the sense of the development of investigations for the case where the cylinder is surrounded with an infinite medium. The three-dimensional linearized theory of elastic waves is used for describing the considered wave propagation problem and, for a solution to the corresponding mathematical problem, the discrete-analytical solution method is developed and employed. The corresponding dispersion equation is obtained and this equation is solved numerically and, as a result of this solution, the dispersion curves are constructed for the first and second modes. By analyzing these curves, the character of the influence of the inhomogeneous initial stresses on the dispersion curves is established. In particular, it is established that as a result of the inhomogeneity of the initial stresses both new dispersion curves and the "band gap" for the wave frequencies can appear.

• Coupled systems mechanics
• /
• 제13권3호
• /
• pp.247-275
• /
• 2024

The paper studies the influence of the fluid flow velocity and flow direction in the initial state on the dispersion of the axisymmetric waves propagating in the inhomogeneously pre-stressed hollow cylinder containing this fluid. The corresponding eigenvalue problem is formulated within the scope of the three-dimensional linearized theory of elastic waves in bodies with initial stresses, and with linearized Euler equations for the inviscid compressible fluid. The discrete-analytical solution method is employed, and analytical expressions of the sought values are derived from the solution to the corresponding field equations by employing the discrete-analytical method. The dispersion equation is obtained using these expressions and boundary and related compatibility conditions. Numerical results related to the action of the fluid flow velocity and flow direction on the influence of the inhomogeneous initial stresses on the dispersion curves in the zeroth and first modes are presented and discussed. As a result of the analyses of the numerical results, it is established how the fluid flow velocity and flow direction act on the magnitude of the influence of the initial inhomogeneous stresses on the wave propagation velocity in the cylinder containing the fluid.

• Coupled systems mechanics
• /
• 제12권1호
• /
• pp.41-68
• /
• 2023

The present work is concerned with the study of the influence of inhomogeneous initial stresses in a hollow cylinder containing a compressible inviscid fluid on the propagation of axisymmetric longitudinal waves propagating in this cylinder. The study is carried out using the so-called three-dimensional linearized theory of elastic waves in bodies with initial stresses to describe the motion of the cylinder and using the linearized Euler equations to describe the flow of the compressible inviscid fluid. It is assumed that the inhomogeneous initial stresses in the cylinder are caused by the internal pressure of the fluid. To solve the corresponding eigenvalue problem, the discrete-analytic solution method is applied and the corresponding dispersion equation is obtained, which is solved numerically, after which the corresponding dispersion curves are constructed and analyzed. To obtain these dispersion curves, parameters characterizing the magnitude of the internal pressure, the ratio of the sound velocities in the cylinder material and in the fluid, and the ratio of the material densities of the fluid and the cylinder are introduced. Based on these parameters, the influence of the inhomogeneous initial stresses in the cylinder on the dispersion of the above-mentioned waves in the considered hydro-elastic system is investigated. Moreover, based on these results, appropriate conclusions about this influence are drawn. In particular, it is found that the character of the influence depends on the wavelength. Accordingly, the inhomogeneous initial stresses before (after) a certain value of the wavelength lead to a decrease (increase) of the wave propagation velocity in the zeroth and first modes.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.571-586
• /
• 2021

The present paper studies the influence of the inhomogeneous initial stresses in the bi-layered hollow cylinder and it is assumed that these stresses are caused by the hydrostatic pressures acting on the interior and outer free surfaces of the cylinder. The study is made by utilizing the version of the three-dimensional linearized theory of elastic waves in bodies with initial stresses for which the initial stress-strain state in bodies is determined within the scope of the classical linear theory of elasticity. For the solution to the corresponding eigenvalue problem, the discrete-analytical method is employed. Numerical results are presented and analyzed for concrete selected pairs of materials. According to these results and their analyses, it is established that, unlike homogeneous initial stresses, the influence of the inhomogeneous initial stresses on the torsional wave dispersion has not only quantitative but also qualitative character. For instance, in particular, it is established that as a result of the initial stresses caused by the hydrostatic pressure acting in the interior free surface of the cylinder, the cut-off frequency appears for the fundamental dispersive mode and the values of this frequency increase with the intensity of this pressure.

• 대한토목학회논문집
• /
• 제33권5호
• /
• pp.1785-1795
• /
• 2013

기존 대부분의 천수흐름 해석모형에서는 연직방향으로 균일한 유속을 가정하였기 때문에 하천 만곡부에서 이차류의 영향을 고려하지 못하고 부정확한 흐름해석 결과를 도출하였다. 본 연구에서는 종횡방향 유속의 연직분포를 평균값과 이로부터의 변동량으로 분할하여 이 값들을 운동량 방정식에 대입하여 생성되는 추가적인 항인 분산응력을 포함하는 수치모형을 개발하였다. 제안된 모형을 $30^{\circ}$, $90^{\circ}$, $270^{\circ}$의 곡률을 가지는 수로에 적용하여 분산응력을 이용한 곡선수로에서의 천수흐름을 수치모의 하였다. 모의 결과, 운동량방정식에 포함된 분산응력항은 생성/소멸과 같은 역할을 하여, 만곡의 내측에서 외측으로 횡방향 운동량을 이동시키게 되므로 분산응력을 포함하지 않는 경우 보다 정확한 수치모의 결과를 제시하는 것으로 밝혀졌다.

• 물과 미래
• /
• 제23권1호
• /
• pp.119-127
• /
• 1990

점착성 부유사 농도분포는 해수유동과 물질 확산에 의해서 결정되며 지배방정식으로는 2차원 수심적분된 Reynolds운동방정식, 연속방정식과 Fick의 확산법칙에 근거를 둔 대류-확산방정식이 사용되었다. 해수유동과 점성퇴적물 확산인 두개의 모형은 유한차분법을 이용하였고 유동모형은 양해법, 확산모형은 다증법을 사용하여 부유사 이동의 현상을 파악하였다. 해수유동방정식의 적용시 이송항의 포함여부에 대해서 조사하였으며 물질확산 방정식에 대해서는 한계전단응력값의 변화가 부유사농도에 영향을 주는가에 대해서 비교하였다.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.451-461
• /
• 2018

Present study is mainly concerned about the idea of innovative utilization of bamboo in modern construction. Owing to its compatible mechanical properties, a beneficial effect of its use in reinforced concrete (RC) frame infills has been observed. In this investigation, finite element analyses have been performed to examine the failure pattern and stress distribution pattern through the infills of a moment resisting RC frame. To validate the pragmatic use of bamboo reinforced components as infills, earthquake loading corresponding to Nepal earthquake had been considered. The analysis have revealed that introduction of bamboo in RC frames imparts more flexibility to the structure and hence may causes a ductile failure during high magnitude earthquakes like in Nepal. A more uniform stress distribution throughout the bamboo reinforced wall panels validates the practical feasibility of using bamboo reinforced concrete wall panels as a replacement of conventional brick masonry wall panels. A more detailed analysis of the results have shown the fact that stress concentration was more on the frame components in case of frame with brick masonry, contrary to the frame with bamboo reinforced concrete wall panels, in which, major stress dispersion was through wall panels leaving frame components subjected to smaller stresses. Thus an effective contribution of bamboo in dissipation of stresses generated during devastating seismic activity have been shown by these results which can be used to concrete the feasibility of using bamboo in modern construction.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.861-875
• /
• 2011

The aim of the present article is to study the micropolar thermoelastic interactions in an infinite Kelvin-Voigt type viscoelastic thermally conducting plate. The coupled dynamic thermoelasticity and generalized theories of thermoelasticity, namely, Lord and Shulman's and Green and Lindsay's are employed by assuming the mechanical behaviour as dynamic to study the problem. The model has been simplified by using Helmholtz decomposition technique and the resulting equations have been solved by using variable separable method to obtain the secular equations in isolated mathematical conditions for homogeneous isotropic micropolar thermo-viscoelastic plate for symmetric and skew-symmetric wave modes. The dispersion curves, attenuation coefficients, amplitudes of stresses and temperature distribution for symmetric and skew-symmetric modes are computed numerically and presented graphically for a magnesium crystal.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.146-154
• /
• 1994

A series of numerical calculations are performed in order to investigate the dispersion mechanism of toxic gaseous and solid pollutants in extremely short-term and short range. The calculations are carried out in an open space characterized by turbulent boundary layer. The simulation is made by the use of numerical model, in which a control-volume based finite difference method is used together with the SIMPLEC algorithm for the resolution of the pressure-velocity coupling problem. The Reynolds stresses are solved by two-equation, k-$\varepsilon$ model modified for buoyancy. The major parameters consider-ed in this study are temperature, velocity and Injection height of toxic gases, environmental conditions such as temperature and velocity of free stream air, and topographic factor. The results are presented and discussed in detail. The flow field is commonly characterized by the formation of a strong recirculation zone due to the upward motion of the hot toxic gas and ground shear stress. The driving force of the upward motion is explained by the effect of thermal buoyancy of hot gas and the difference of inlet velocity between toxic gas and free stream.

• 한국안전학회지
• /
• 제10권3호
• /
• pp.68-80
• /
• 1995

A series of parametric calculations have been performed in order to investigate the short-term and short-range plume and puff behavior of toxic gaseous and solid pollutant dispersion in an open atmosphere. The simulation is made by the use of the computer program developed by this laboratory, in which a control-volume based finite-difference method is used together with the SIMPLEC algorithm for the resolution of the pressure-velocity coupling appeared In Wavier-Stokes equation. The Reynolds stresses are solved by the standard two-equation k-$\varepsilon$ model modified for buoyancy together with the RNG(Renormalization Group) k-$\varepsilon$ model. The major parameters considered in this calculation are pollutant gas density and temperature, the relative velocity of pollutants to that of the surrounding atmospheric air, and particulate size and density together with the height released. The flow field is typically characterized by the formation of a strong recirculation region for the case of the low density gases such as $CH_4$ and air due to the strong buoyancy, while the flow is simply declining pattern toward the downstream ground for the case of heavy molecule like the $CH_2C1_2$and $CCl_4$, even for the high temperature, $200^{\circ}C$. The effect of gas temperature and velocity on the flow field together with the particle trajectory are presented and discussed in detail. In general, the results are physically acceptable and consistent.