• 제목/요약/키워드: Dispersion forces

검색결과 55건 처리시간 0.023초

유기화합물의 승화열 예측을 위한 QSPR분석 (QSPR analysis for predicting heat of sublimation of organic compounds)

  • 박유선;이종혁;박한웅;이성광
    • 분석과학
    • /
    • 제28권3호
    • /
    • pp.187-195
    • /
    • 2015
  • 승화열은 대기 유기 오염물질의 확산에 관련된 환경적인 문제를 해결하거나, 위험한 화학 물질의 위해성을 평가하는 데에 중요한 변수이다. 하지만 실험적으로 승화열을 측정하려면 많은 시간과 비용이 소모 되며, 그 실험자체도 복잡하고 위험하다. 따라서 본 연구에서는 유기화합물의 승화열을 간단하게 예측하는 모델을 개발하기 위하여 정량적 구조-물성 상관관계 연구를 이용하였다. 군기반 전진선택방법을 적용하여 다중선형회귀방법과 서포트 벡터 머신과 같은 학습방법에 적합한 분자표현자들을 선택하도록 하였다. 개별 모델과 복합모델들은 부스트래핑 방법과 y-임의추출법에 의해 내부검증이 되었다. 외부 테스트 데이터의 예측 성능은 적용범위를 고려하므로서 개선되었다. 다중선형회귀모델에 따르면, 승화열은 분자간의 분산력, 수소결합, 정전기적 상호작용, 쌍극자-쌍극자 상호작용과 관련이 있는 것을 나타낼 수 있었다.

Bentonite와 폴리에틸렌을 이용한 復合材의 機械的 性質 (Mechanical Properties of Bentonite-Polyethylene Composites)

  • 문탁진;한기철
    • 대한화학회지
    • /
    • 제21권5호
    • /
    • pp.379-383
    • /
    • 1977
  • 친유기성 bentonite가 고분자 물질중에서 잘 분산된다는 성질을 이용하여 고분자 물질과 bentonite의 복합재를 제조하고 그 기계적 성질에 관해서 연구하였다. Bentonite는 고분자 물질내에서 분산과 결합이 좋아지도록 imidazoline으로 처리한 후 충진제를 사용하였다. 고분자 물질인 polyethylene은 입도가 100mesh인 것을 사용하였고 친유기성 bentonite 즉 bentone은 입도가 250mesh인 것을 실험에 사용하였다. 분말의 혼합에는 V형 혼합기를 사용하였으며 Banbury mixer로 용융 혼합 시켰다. 시편의 모양은 plate press에 시료를 놓고 열을 가하여 판상으로 제작하였다. 물성을 조사하기 위하여 인장 강도, 곡 강도, 그리고 압축 강도 시험을 하였다. 인장 강도, 연신율, 곡 강도, 그리고 일정한 하중에 대한 굴곡율은 충진제 증가에 따라 감소되었다. 또한 압축 강도는 충진제 증가에 따라 크게 증가 하였다.

  • PDF

히드록시프로필셀룰로오스/카르보폴 고체분산체의 점막부착성과 팽윤 및 약물방출특성 (Mucoadhesion, Swelling and Drug Release Characteristics of Hydroxypropylcellulose/Carbopol Solid Dispersions)

  • 김상헌;양수근;신동선;이민석;최영욱
    • Journal of Pharmaceutical Investigation
    • /
    • 제24권3호
    • /
    • pp.155-165
    • /
    • 1994
  • Some mucoadhesive polymers such as hydroxypropylcelluose (HPC) and carbopol-934 (CP) have been employed for the preparation of mucoadhesive polymeric systems, and their physical properties including mucoadhesion, swelling, and drug release were evaluated. A new simple experimental technique that can quantitatively measure the bioadhesive properties of various polymeric systems has been developed by the methods of detachment force test. As the polymeric systems, the discs of freeze-dried HPC/CP solid dispersions were prepared. The mucosa used in these tests were upper, middle, and lower parts of small intestine of male rats weighing $300{\sim}350\;g$. Detachment forces were increased as the mole fraction of CP increased in discs of HPC/CP solid dispersions. In the points of intestinal site dependence of mucoadhesion, the solid dispersions revealed non-specific mucoadhesion to the intestine. Swelling and drug release characteristics of mucoadhesive polymeric systems were studied extensively to find out the feasibility for the oral controlled delivery systems. Swelling ratio, expressed as the final height/initial height, has been determined in various pH buffer solutions. Hydrochlorothiazide (HCT) was employed as a model drug for release study. Apparent swelling and drug release rate constants, $K_s$ and $K_r$ respectively, were obtained from the square-root time plot of either swelling ratio or released amount of drug, particularly for the time periods before reaching the equilibrium. As a result, the swelling ratio of HPC/CP solid dispersions was increased as the weight percentage of CP increased. Similarly, the release of HCT from the solid dispersions was dependent on pH changes and CP contents, resulted in the slower release of HCT with the increases of pH and CP contents.

  • PDF

뢰스-고토양 퇴적물의 전처리 과정에 따른 입도분석 결과 비교 (Comparisons of Grain Size Analysis Results by Different Pretreatments Procedures in Loess-paleosol Sediments)

  • 윤순옥;박충선;황상일
    • 대한지리학회지
    • /
    • 제45권5호
    • /
    • pp.553-572
    • /
    • 2010
  • 퇴적물이나 토양의 입도분석은 가장 중요하고 기초적인 지구과학적 연구방법 중 하나이다. 본 연구는 뢰스-고토양 퇴적물을 대상으로 10가지 전처리 과정에 따른 입도분석 결과의 차이를 비교하였다. 퇴적물의 분산에 있어 확산제의 효과가 가장 크지만, 확산제와 염산의 처리 순서에 따라 큰 차이를 보인다. 이는 염산의 염소 이온과 확산제의 나트륨 이온 사이의 정전기적 인력으로 인해, 나트륨 이온이 효과적으로 퇴적물의 칼슘 이온을 치환하지 못하기 때문으로 생각된다. 또한 과산화수소와 염산은 끓는 물보다는 효과적이지만 퇴적물의 분산에 큰 영향을 미치지 않는다. 따라서 연구 목적 및 시료 특성에 맞는 적절한 방법을 선정해야 신뢰할 수 있는 입도분석 결과를 얻을 수 있을 것이다.

해상풍력개발사업의 바다환경영향평가 개선방안 (Improvement for Marine Environmental Impact Assessment on the Development of Offshore Wind Power)

  • 김귀영;이대인;전경암;엄기혁;유준
    • 환경영향평가
    • /
    • 제21권1호
    • /
    • pp.1-13
    • /
    • 2012
  • We diagnosed on status and problems of environmental assessment regarding development of offshore wind power, and also on reasonable core assessment items. Most of the coastal wind power are located on the western coastline of Korea and Jeju Island. In the selections of the site for the offshore wind farms, a previous investigations should be conducted with regard to distances from the land, stabilities from external forces (tide, wave, etc.) and topographical changes, and characteristics of the surroundings (distributions of protected area, fishing ground, artificial seagrasses, and shipping traffic). It is needed to assess dispersion of suspended solids, changes of the sea bottom, and impacts on fisheries resources and fishing activities under construction of offshore wind power. Furthermore, the responses of marine organisms to noise and vibration, impacts by electromagnetic fields, impacts on sea birds, hindrances to sea lane routes, and damaged scenery and marine protection areas are thoroughly assessed during operation processes. The consultation criteria in case of development of offshore wind farm is adjusted by focusing marine environmental impact assessment.

하전 입자의 비구형 응집 성장에 대한 수치적 연구 (Numerical Simulation far the Non-Spherical Aggregation of Charged Particles)

  • 박형호;김상수;장혁상
    • 대한기계학회논문집B
    • /
    • 제26권2호
    • /
    • pp.227-237
    • /
    • 2002
  • A numerical technique for simulating the aggregation of charged particles was presented with a Brownian dynamic simulation in the free molecular regime. The Langevin equation was used for tracking each particle making up an aggregate. A periodic boundary condition was used for calculation of the aggregation process in each cell with 500 primary particles of 16 nm in diameter. We considered the thermal force and the electrostatic force for the calculation of the particle motion. The electrostatic force on a particle in the simulation cell was considered as a sum of electrostatic forces from other particles in the original cell and its replicate cells. We assumed that the electric charges accumulated on an aggregate were located on its center of mass, and aggregates were only charged with pre-charged primary particles. The morphological shape of aggregates was described in terms of the fractal dimension. In the simulation, the fractal dimension for the uncharged aggregate was D$\_$f/ = 1.761. The fractal dimension changed slightly for the various amounts of bipolar charge. However, in case of unipolar charge, the fractal dimension decreased from 1.641 to 1.537 with the increase of the average number of charges on the particles from 0.2 to 0.3 in initial states. In the bipolar charge state, the average sizes of aggregates were larger than that of the uncharged state in the early and middle stages of aggregation process, but were almost the same as the case of the uncharged state in the final stage. On the other hand, in the unipolar charge state, the average size of aggregates and the dispersion of particle volume decreased with the increasing of the charge quantities.

알킬화가 다중벽탄소나노튜브로 강인화된 에폭시수지의 계면 및 열전도도에 미치는 영향 (Influence of Alkylation on Interface and Thermal Conductivity of Multi-walled Carbon Nanotubes-reinforced Epoxy Resin)

  • 허건영;이경엽;박수진
    • 폴리머
    • /
    • 제35권6호
    • /
    • pp.548-552
    • /
    • 2011
  • 본 연구에서는 기능화된 다중벽탄소나노튜브를 준비하기 위해서 두 가지 기능화 방법인 산처리와 화학적 아미드화 방법이 수행되었다. 그리고 에폭시/기능화된 다중벽탄소나노튜브 복합재료의 특성이 연구되고 비교되었다. 기능화 방법에 따른 다중벽탄소나노튜브의 표면 관능기를 확인하기 위해 푸리에 변환 적외선 분광기(FTIR)를 사용하였다. 계면 및 열전도도에 미치는 다중벽탄소나노튜브 기능화의 효과는 제타전위차 분석기, 전자주사현미경 그리고 열전도도 분석기에 의해서 연구되었다. 이러한 결과들로 에폭시/기능화된 다중벽탄소나노튜브 복합재료의 열전도도는 dodecylamine과의 그래프팅을 통해 증가될 수 있다는 것을 알 수 있었다. 이것은 DGEBF 에폭시 수지 내에서 dodecylamine과 그래프팅한 다중벽탄소나노튜브의 상대적으로 강한 분산력에 의한 것으로 설명될 수 있었다. 이러한 결과들은 그래프팅한 다중벽탄소나노튜브의 제타전위차 값이 산처리한 다중벽탄소나노튜브의 값보다 더 높은 음의 값을 가지는 결과와 일치하였다.

도로터널 환기시뮬레이션 모델 현장적용 연구 (On-site Application of a Vehicle Tunnel Ventilation Simulator)

  • 이창우;김효규
    • 터널과지하공간
    • /
    • 제11권4호
    • /
    • pp.319-327
    • /
    • 2001
  • 장대도로터널 환기시스템의 최적 설계 및 운영은 새로운 설계도구의 개발을 요구하며 최근 환기 관련 변수들의 동적인 관계를 정량적으로 분석할 수 있는 도구로써 널리 이용되고 있다. 본 연구는 도로터널 환기시뮬레이션 모델인 NETVEN의 현장 검증연구를 국내 도로터널을 대상으로 수행함을 목적으로 하였다. 환기방식 및 차량통행방식이 다른 4개 터널을 대상으로 시뮬레이션 및 현장 측정연구를 수행하였으며 시뮬레이션 모델의 적용 결과와 측정 결과의 차이는 다음 4가지 요인에 기인한 것으로 분석된다. (1)실제 터널내 기류는 정상류 유동을 가정하는 시뮬레이션 모델과는 달리 천이-지연계의 특성을 가지고 있다. (2) 시뮬레이션 모델은 정상상태를 가정하나 측정값은 순간값을 대상으로 하므로 분산이 상대적으로 크게 나타난다. 환기력 관련변수들은 거의 정상상태가 아니며 교통 및 기상관련 변수들은 특히 순간적인 변화가 심한 편이다. (3) CO 농도의 경우에 출구부근에서의 차이가 상대적으로 크게 나타나는 현상이 뚜렷하며 특히 농도가 상대적으로 클수록 차이가 크다. 이는 난류확산에 의한 농도 저하가 원인으로 보인다. 난류확산 가능성은 최대 농도지점이 출구점이 아닌 약간 안쪽 지점에서 나타나는 현상에서도 나타나고 있다. (4) 교통량이 많을 경우 환기속도 오차가 크게 나타나므로 차량의 배기특성뿐만 아니라 공기역학적 특성에 대한 지속적인 연구가 필요하다.

  • PDF

중국 길림성 백성지역 흑개토의 이화학성 및 인산 흡착 특성 (Physical-chemical Properties and Phosphorus Adsorption Characteristics of Soils in Baicheng, China)

  • 김성애;이상모;최우정;류순호
    • Applied Biological Chemistry
    • /
    • 제44권2호
    • /
    • pp.92-96
    • /
    • 2001
  • 농경지로의 개발 가능성이 높은 중국 길림성 백성지역의 주요한 토양인 흑개토의 이화학성 및 인산 흡착특성을 조사하였다. 토지 이용방식 또는 재배작물이 서로 다른 중국 길림성 백성지역 4곳과 중국 용정에 위치한 연변 대학교 농과대학 부속 시험장 1곳에서 1993년 8월에 토양을 채취하여 실험을 수행하였다, 중국 길림성 백성지역 토양의 $_PH$는 미경작지 10.2, 경작지는 $7.3{\sim}7.6$으로 비교적 높았다. 양이온 치환용량은 20 cmol(+) $kg^{-1}$ 이상이었으며, 치환성 양이온 중 Na는 특히 표토에 많이 존재하였으며, Ca의 함량이 매우 높아 Ca 포화율이 100% 이상을 나타내었다. 토양 포화 침출액의 주요 양이온은 Na이었으며, ECe와 SAR을 기준으로 백성 미경작지 토양은 염류-나트륨성 토양, 경작지 토양은 나트륨성 또는 일반 토양에 해당하였다. 백성지역 토양의 유효인산 함량은 10mg P $kg^{-1}$ 미만으로 아주 낮았으며, 최대 인산흡착량은 $ $ mg P $kg^{-1}$이었다. 길림성 백성지역 토양의 경우 유효인산 함량이 매우 낮아 토양 비옥도 중진을 위한 인산질 비료의 시용과 함께 토양 투수성의 개선 등과 같은 적절한 토양 관리가 필요하며, 용정지역 토양의 경우에는 인산흡착 특성을 고려하여 인의 과잉 축적을 방지하기 위한 인산질 비료의 적정 시용을 권장하여야 한다.

  • PDF

플라스틱 온실 죔쇠의 미끄럼 저항력 평가를 위한 실험 방법 (Test Methods for Evaluation of Slip-Resistance Force of Clamp for Plastic Greenhouse)

  • 최만권;송호성;조명환;유인호;신영안;임성윤;류희룡
    • 생물환경조절학회지
    • /
    • 제25권3호
    • /
    • pp.193-199
    • /
    • 2016
  • 본 연구에서는 플라스틱 온실에서 사용하는 죔쇠의 성능 평가 시 시험편 끝단의 구속조건이 미끄럼 저항력에 미치는 영향을 분석하기 위해 시험편 구속조건을 실험변수로 판형죔쇠의 미끄럼 저항력을 측정하였다. 각 구속조건별로 측정한 미끄럼 저항력의 평균값은 서까래 고정-고정단이 가장 컸으며, 내재해형 죔쇠의 평가 기준 값과 비교한 결과에서도 서까래 고정-고정단의 경우에만 기준을 만족하는 것으로 나타났다. 그러나 서까래 고정-고정단 구속조건은 다른 구속조건들에 비해 산포도가 상대적으로 크게 나타나 신뢰성이 떨어지는 결과를 보였다. 또한, 일원분산 분석결과에서도 서까래 고정-고정단은 다른 구속조건들과 비교해 미끄럼 저항력이 유의한 차이를 보였다. 따라서 시험편 구속조건이 미끄럼 저항력 평가에 영향을 미친다고 판단하며 연구자 및 기술자들이 죔쇠의 미끄럼 저항력을 측정할 때에는 시험편의 구속조건이 결과값의 신뢰성에 미치는 영향을 면밀히 검토해야 할 것으로 판단된다.