• Membrane and Water Treatment
• /
• v.7 no.3
• /
• pp.209-221
• /
• 2016

As a highly hydrophilic fibrillar mineral in nature, attapulgite (ATP) is a promising new additive for preparation of ultrafiltration (UF) hybrid membrane. In this work, ATP particles, which were grafted with a new Gemini surfactant of Ethyl Stearate-di(octadecyl dimethyl ammonium chloride) to detach the crystal bundles to single crystal and enhance the uniform dispersion in an organic polymer matrix, were incorporated into poly(vinylidene fluoride) (PVDF) matrix, and PVDF/Gemini-ATP hybrid membranes for adsorptive removal of Ni(II) ions from aqueous solution were prepared via a phase inversion method. Chemical composition, crystalization and morphology of the modified ATP were characterized by Fourier transform infrared spectroscopy (FTIR), Transmission electron microscope (TEM) and X-ray diffraction (XRD), respectively. The morphology of the hybrid membrane was characterized by Scanning electron microscopy (SEM), the performance of permeability, hydrophilicity and adsorption of Ni(II) ions were studied, and the adsorption kinetics of the PVDF/ATP hybrid membranes were particular concerned. The results showed that the hybrid membrane displayed a good thermal stability and hydrophilicity. Comparing with PVDF membrane, the hybrid membrane possessed good adsorption capacity for Ni(II) ions, and the adsorption kinetics fit well with Lagergren second-order equation.

• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.179-183
• /
• 2007

BCB $Resin-BaNd_2Ti_4O_{12}$(BNT) composites with BNT contents were prepared by tape casting method and epoxy resin-BNT composites were prepared by using heating press. Their dielectric properties and microstructures were investigated. The dielectric properties such as dielectric constant and dielectric loss at 1 MHz for epoxy resin-BNT composites and BCB resin-BNT composites are improved with an increase of BNT volume fraction. The dielectric constant of the Epoxy-BNT composite increased from 5.9 to 7.8 as the volume fraction of BNT increased from 15 to 25. The dielectric constant of the BCB-BNT composite increased from 9.1 to 15.5 as the volume fraction of BNT increased from 30 to 50. The dielectric behavior of BCB-BNT system can be explained by Lichtenecker's equation. The dielectric constant of epoxy resin-BNT composite is smaller than that of BCB resin-BNT composite. These results are considered to be related with the dispersion of BNT filler in polymer matrix from the result of SEM photograph.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.2
• /
• pp.227-237
• /
• 2002

A numerical technique for simulating the aggregation of charged particles was presented with a Brownian dynamic simulation in the free molecular regime. The Langevin equation was used for tracking each particle making up an aggregate. A periodic boundary condition was used for calculation of the aggregation process in each cell with 500 primary particles of 16 nm in diameter. We considered the thermal force and the electrostatic force for the calculation of the particle motion. The electrostatic force on a particle in the simulation cell was considered as a sum of electrostatic forces from other particles in the original cell and its replicate cells. We assumed that the electric charges accumulated on an aggregate were located on its center of mass, and aggregates were only charged with pre-charged primary particles. The morphological shape of aggregates was described in terms of the fractal dimension. In the simulation, the fractal dimension for the uncharged aggregate was D$\_$f/ = 1.761. The fractal dimension changed slightly for the various amounts of bipolar charge. However, in case of unipolar charge, the fractal dimension decreased from 1.641 to 1.537 with the increase of the average number of charges on the particles from 0.2 to 0.3 in initial states. In the bipolar charge state, the average sizes of aggregates were larger than that of the uncharged state in the early and middle stages of aggregation process, but were almost the same as the case of the uncharged state in the final stage. On the other hand, in the unipolar charge state, the average size of aggregates and the dispersion of particle volume decreased with the increasing of the charge quantities.

• Advances in nano research
• /
• v.10 no.2
• /
• pp.151-163
• /
• 2021

The main target of this study is to investigate nonlinear transient responses of moving polymer nano-size plates fortified by means of Graphene Platelets (GPLs) and resting on a Winkler-Pasternak foundation under a transverse pressure force and a temperature variation. Two graphene spreading forms dispersed through the plate thickness are studied, and the Halpin-Tsai micro-mechanics model is used to obtain the effective Young's modulus. Furthermore, the rule of mixture is employed to calculate the effective mass density and Poisson's ratio. In accordance with the first order shear deformation and von Karman theory for nonlinear systems, the kinematic equations are derived, and then nonlocal strain gradient scheme is used to reflect the effects of nonlocal and strain gradient parameters on small-size objects. Afterwards, a combined approach, kinetic dynamic relaxation method accompanied by Newmark technique, is hired for solving the time-varying equation sets, and Fortran program is developed to generate the numerical results. The accuracy of the current model is verified by comparative studies with available results in the literature. Finally, a parametric study is carried out to explore the effects of GPL's weight fractions and dispersion patterns, edge conditions, softening and hardening factors, the temperature change, the velocity of moving nanoplate and elastic foundation stiffness on the dynamic response of the structure. The result illustrates that the effects of nonlocality and strain gradient parameters are more remarkable in the higher magnitudes of the nanoplate speed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.161-167
• /
• 2022

Ocean waves passing through the underwater bar at a shallow depth experience a shoaling effect caused by decreasing water depth, a nonlinear interaction therein owing to steepening wave slope, and a wave dispersion effect as the water depth increases again. Because this problem includes many complicated phenomena, it is used as a good example of validating a theoretical development or a CFD method for ocean wave applications. Validation is performed mainly for regular waves by comparing the wave elevation patterns in the time domain with the experimental results. In this study, the spectral evolution of wave spectrum is investigated in the frequency domain when a CFD method such as OpenFOAM is applied for this problem. In particular, the effects of initial phase conditions as well as the nonlinear interaction among harmonic waves are studied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.472-472
• /
• 2023

In this study, the transport of pollutants was analyzed using the K-River and K-DRUM coupling model for water pollution accidents that occurred in the Nakdong River water system. In Korea, the necessity of a distribution model that accommodates the water circulation process and the importance of nonpoint pollution sources were emphasized in water quality management after the introduction of the total amount of water pollution. Therefore, in order to reflect the runoff characteristics of nonpoint sources, the K-DRUM distribution model, which can analyze pollution in the basin, was used. And the reproducibility of the model was improved by applying the operating rules of dams operating in the Nakdong River system. In addition, in order to analyze the movement of pollutants in the river, only the advection part of the advection-dispersion equation was applied to the 1D hydraulic model K-River to perform pollutant tracking. As a result of water pollution analysis, the peak concentration of the pollutant was underestimated, but the arrival time and the trend of the overall pollutant concentration were well reproduced.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.148-148
• /
• 2020

산업의 고도화가 진행됨에 따라 화학원료의 사용이 증가하고 있고 독성을 가진 화학물질이 하천으로 유입되는 사고가 빈번하게 발생하고 있다. 수환경으로 유입되는 유해화학물질은 주로 무색무취의 물질들로 사고가 발생하더라도 초기 발견이 어려워 어류폐사를 유발하거나 취수시설에서 용수로 취수되는 경우가 발생하기 때문에 이에 대한 대응책 마련이 필수적이다. 하천에 유입된 오염물질의 거동을 신속하게 예측하기 위해 1차원 오염물질 추적 모형이 활용되는데, Fickian 이송-분산 모형(Fickian Advection-dispersion equation model; FADE)이 주로 사용되고 있다. 하지만 FADE는 오염물질이 하천 저장대에서 지체되는 현상을 반영하지 못하기 때문에 농도곡선의 왜곡도를 구현하지 못하는 단점을 가지고 있다. 따라서 본 연구에서는 하천저장대모형(River Storage Model; RSM)을 개발하고 이를 국가하천인 감천에 적용하였다. 본 연구에서 개발한 RSM은 분산계수, 본류대 면적, 저장대 면적, 저장대 교환계수의 네 가지 매개변수를 통해서 하천의 물질 저장 및 교환 특성를 구현한 non-Fickian 모형으로서, 생화학반응, 휘발, 흡·탈착항을 추가하여 유해화학물질의 혼합 거동을 정확하게 모의할 수 있도록 개발하였다. 저장대 모형의 매개변수를 산정하기 위해서 하천 유량과 지형자료를 기반으로 HEC-RAS를 모의하여 계산된 수리특성을 입력변수로 사용하였다. 저수기, 평수기, 풍수기 유량을 기준으로 세 경우의 시나리오 모의를 수행하였는데, 5ton의 톨루엔이 김천산업단지에서 감천으로 유입된 경우 약 20km 하류에 위치한 취수장에서 톨루엔의 농도변화를 예측했다. 보존성 물질에 대한 모의 결과, 풍수기의 경우 저수기에 비해 유속이 크기 때문에 취수장에서 20.56시간 먼저 기준농도에 도달하고, 7.21시간 더 짧게 머무는 것으로 나타났다. 유해화학물질의 반응특성에 대한 민감도 분석을 시행한 결과, 생화학적 반감기가 18.98시간보다 길고, 옥탄올-물 분배계수가 2.267 이하인 물질은 생분해 및 흡·탈착 반응에 둔감한 것으로 나타났다. 1m 수심 기준 0.114m/s 이하 유속에서의 하천 수리조건에서는 화학물질의 휘발성을 무시할 수 있는 것으로 밝혀졌다.

• Computers and Concrete
• /
• v.32 no.1
• /
• pp.61-74
• /
• 2023

This article investigates the wave propagation analysis of the imperfect functionally graded (FG) sandwich plates based on a novel simple four-variable integral quasi-3D higher-order shear deformation theory (HSDT). The thickness stretching effect is considered in the transverse displacement component. The presented formulation ensures a parabolic variation of the transverse shear stresses with zero-stresses at the top and the bottom surfaces without requiring any shear correction factors. The studied sandwich plates can be used in several sectors as areas of aircraft, construction, naval/marine, aerospace and wind energy systems, the sandwich structure is composed from three layers (two FG face sheets and isotropic core). The material properties in the FG faces sheet are computed according to a modified power law function with considering the porosity which may appear during the manufacturing process in the form of micro-voids in the layer body. The Hamilton principle is utilized to determine the four governing differential equations for wave propagation in FG plates which is reduced in terms of computation time and cost compared to the other conventional quasi-3D models. An eigenvalue equation is formulated for the analytical solution using a generalized displacements' solution form for wave propagation. The effects of porosity, temperature, moisture concentration, core thickness, and the material exponent on the plates' dispersion relations are examined by considering the thickness stretching influence.

• Journal of Radiation Protection and Research
• /
• v.48 no.4
• /
• pp.175-183
• /
• 2023

Background: Recently, biological adsorbents have been developed for removing radionuclides from radioactive liquid waste due to their high selectivity, eco-friendliness, and renewability. However, since they can be damaged by radiation in radioactive waste, a method for estimating the bio-adsorbent performance as a time should consider the radiation damages in terms of their renewability. This paper aims to develop a simulation method that applies a deep learning technique to rapidly and accurately estimate the adsorption performance of bio-adsorbents when inserted into liquid radioactive waste. Materials and Methods: A model that describes various interactions between a bio-adsorbent and liquid has been constructed using numerical methods to estimate the adsorption capacity of the bio-adsorbent. To generate datasets for machine learning, Monte Carlo N-Particle (MCNP) simulations were conducted while considering radioactive concentrations in the adsorbent column. Results and Discussion: Compared with the result of the conventional method, the proposed method indicates that the accuracy is in good agreement, within 0.99% and 0.06% for the R² score and mean absolute percentage error, respectively. Furthermore, the estimation speed is improved by over 30 times. Conclusion: Note that an artificial neural network can rapidly and accurately estimate the survival rate of a bio-adsorbent from radiation ionization compared with the MCNP simulation and can determine if the bio-adsorbents are reusable.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.313-324
• /
• 2010

There are many problems in application of FRP reinforcing bars as shear reinforcement, since bending of FRP bars is not a feasible process on construction site. Even though FRP bars can be manufactured in bent shape, they have lower strength at bent location. However, there are no serious problems to use FRP bars as flexural reinforcement. Plates or slabs like bridge decks, in general, do not need shear reinforcements. These types of members with FRP flexural reinforcement have lower shear strength than those with conventional steel flexural reinforcement. However, reliable process or equation for shear strength estimation of FRP reinforced concrete without shear reinforcement are not established, yet. In this study, predicted shear strength obtained from available design equations and assessment equations are compared with 211 experimental results. The results showed that among the current design codes, the Architectural Institute of Japan (AIJ) and the Institution of Structural Engineers (ISE) provided the best estimation. ACI 440.1R-06 provided conservative results with degree of dispersion similar to that of ISE. In addition, regression analysis on the collected experimental results was conducted to develop regression models. As a result, a new reliable shear strength equation was proposed.