• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.66-69
• /
• 2009

The compositional dependence of bismuth iron oxides and effect of La-substitutions in the structure of $BiFeO_3$ compounds were investigated, which compounds were synthesized by conventional ceramic processing. It is shown that some of bismuth iron oxides including $BiFeO_3$ show the narrow single phase region. The effect of La-doping in $BiFeO_3$ was presented as disappearance of many impurity phases of Bi-Fe-O compounds. The lower electrical resistivity was obtained as those compositions of Fe deficient region and La-doped $BiFeO_3$. The saturation magnetization of La-doped $BiFeO_3$ was increased with La content. The dielectric dispersion was also observed for those Bi-Fe-O compounds with Fe deficient and La-doped $BiFeO_3$ at low frequencies under 1 kHz.

• 한국광학회지
• /
• 제15권2호
• /
• pp.104-108
• /
• 2004

폐경로를 통한 Fabry-Perot 레이저의 자기궤환 레이저 발진(self-seeding laser oscillation)을 이용하여 구조가 간단하고 경제적인 색분산(chromatic dispersion) 측정법을 제안하였다. 저가의 Fabry-Perot 레이저를 이용하여 광펄스들을 생성하고, 광섬유를 통해 전송되는 광펄스들 사이의 군속도 차(group delay difference)를 Fabry-Perot 레이저의 자기궤환 발진 현상을 통해 감지함으로써 광섬유의 색분산계수를 측정할 수 있도록 하였다. 제안된 측정법에 따라 구현된 측정 장치는 고가의 상용 계측기와 비슷한 수준의 색분산계수 측정 정확도를 제공하고, 재현성은 0.5%보다 좋음을 실험적으로 검증하였다.

• 자원환경지질
• /
• 제27권5호
• /
• pp.451-458
• /
• 1994

Geochemical studies on gold-bearing quartz veins and granitic wallrocks from the Mugeug mine were carried out in order to investigate primary dispersion patterns of elements and to quantify primary dispersion widths of elements with distance from the gold-bearing quartz veins. The best fitting model of dispersion pattern in altered wallrock around the gold-bearing quartz veins is an exponential function for Au, As, Sb, $Na_2O$ and Sr, and a quadratic function for CaO, $K_2O$, MnO, Ba, Rb and Cs. The primary dispersion widths are 15~343 cm in the hanging wall, and 33~173 cm in the footwall. The width of primary dispersion in the hanging wall is twice as thick as that in the footwall mainly due to the thermal effect and volatile components. The primary dispersion width is increased as the increase of gold-bearing quartz vein width and contents of As and Sb in gold-bearing quartz veins, but is not related to Au content in gold-bearing quartz veins.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.165-169
• /
• 2007

액체로켓엔진의 시스템 시험에서는 엔진의 개발 최종 단계로서 각 구성품의 성능과 조합된 상태에서의 시스템 성능을 확인하고 인증한다. 엔진의 성능 분산, 비행시 발생하는 입구 조건 변화에 따른 변동, 인증을 위한 추가 성능을 고려하여 시스템의 시험 영역을 결정하였다. 또한 터보펌프의 양정 곡선에 의해 변화되는 시험영역과 구성품의 작동점의 변화폭을 비교하였다. 그 결과 터보펌프 양정곡선의 기울기가 완만할수록 엔진 보정에서 발생하는 구성품 성능영역 변동이 감소되고 엔진 입구조건이나 내부 구성품 오차에 의한 변동은 증가 한다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.71-73
• /
• 2008

The development of polymer/inorganic nanocomposites has attracted a great deal of interest due to the improved hybrid properties derived from the two different components. Various nanoscale fillers have been used to enhance polymer mechanical and thermal properties, such as toughness, stiffness, and heat resistance. The effects of the filler on the final properties of the nanocomposites are highly dependent on the filler shape, particle size, aggregate size, surface characteristics, polymer/inorganic interactions, and degree of dispersion. In this paper, we describe the influence of different $CaCO_3$ dispersion methods on the thermal properties of polyethylene terephthalate (PET)/$CaCO_3$ composites: i.e., the adsorption of $CaCO_3$ on the modified PET surface, and the hydrophobic modification of the hydrophilic $CaCO_3$ surface. We prepared PET/$CaCO_3$ nanocomposites using a twin-screw extruder, and investigated their thermal properties and morphology.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.207-212
• /
• 2015

The purpose of this research was to synthesize fluorine modified waterborne polyurethane dispersion (F-WPU) by soap-free (internal emulsifier) emulsion polymerization techniques, to prepare coating solution based on fluorine modified waterborne polyurethane dispersion (F-WPU) and to compare the chemical and thermo-mechanical properties on the electrogalvanized steel sheet. Environmentally friendly F-WPU was prepared with a fluorinated polyol containing 60 wt% of fluorine. There are various ways of combining a wide variety of fluorinated polyols and diisocyanate to exhibit novel properties of waterborne polyurethane dispersion. Components of coating solution were largely divided into 4 kinds i.e., F-WPU, acrylic emulsion, silane coupling agent, and colloidal silicate. F-WPU coating solution on the electro-galvanized steel sheet showed excellent properties of corrosion resistance, alkali resistance and heat resistance, as compared to other coating solutions using a general waterborne resin. The F-WPU coating solution's reliable effects are possibly due to the fluorine atoms incorporated even in a small amount of F-WPU.

• Macromolecular Research
• /
• 제8권4호
• /
• pp.186-191
• /
• 2000

Clay-dispersed nanocomposites have been prepared by simple melt-mixing of three components, i.e. poly (styrene co-acrylonitrile) copolymer (SAN), poly ($\xi$-caprolactone ) (PCL), and an organophilic clay(Cloisite(R) 30A). In the present study, poly($\xi$-caprolactone) was added in the mixtures in order to facilitate the intercalation of SAN into the gallery of silicate layers, and the molecular weight effects of PCL on the dispersion of silicate layers were compared by changing the amount of added PCL. The degree of dispersion of 10-$\AA$-thick silicate layers of clay in the nanocomposites was investigated by using an X-ray diffractometer and a transmission electron microscope. It was found that PCL added in the mixture facilitate the intercalation of SAN copolymers into the galleries of silicate layers modified with an organic intercalant, resulting in the better dispersion of clay. It was, also, observed that the processing temperature influences the degree of clay dispersion.

• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.391-399
• /
• 2004

This paper investigated the dispersion characteristics of horizontal surface waves as means to apply conversional SASW techniques. To verify this proposal, 3D finite element analysis and Transfer matrix solution were performed. SH wave(Love waves) has the some advantages in comparison with Rayleigh wave. Representatively, Love wave has a characteristics not affected by compression wave. These characteristics have the robust applicability for the surface wave investigation techniques. In this study, for the purpose of employing Love wave in the SASW method, the dispersion characteristics of the Love wave was extensively investigated by the theoretical and numerical approaches. The 3-D finite element and transfer matrix analyses for the half space and two-layer systems were performed to determine the phase velocities from Love wave as well as from both the vertical and the horizontal components of Rayleigh wave. Preliminary, numerical simulations and theoretical solutions indicated that the dispersion characteristics of horizontal surface wave(Love waves) can be sufficiently sensitive and appliable to SASW techniques.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.191-195
• /
• 2006

우주 발사체의 성공적인 비행을 위해서는 로켓 엔진의 성능 분산 관리가 필수적이다. 양산되는 엔진의 성능편차를 정량적으로 예측하기 위한 해석을 수행하고 성능영향계수를 이용하여 보정에 필요한 차압을 산출하였다. 별도의 추력제어 시스템을 갖추지 않은 엔진의 진공 추력 분산은 +9.1%, -8.7%로 나타났으며 엔진 혼합비 오차는 +9.7%, -9.6%에 달했다. 보정에 필요한 요구차압은 동일한 혼합비 보정에 대해 연소기 배관 산화제 측에서 더 작게 나타났으나 가스발생기 배관의 요구차압은 더 크게 요구된다.

• 항공우주기술
• /
• 제10권1호
• /
• pp.63-69
• /
• 2011

본 연구에서는 기존의 가스발생기 사이클 액체로켓 엔진 모드해석 프로그램(GEMAT)을 개선하여 엔진 구성품이 가지는 성능 분산으로 인한 시스템 수준에서의 성능 분산을 계산 하는 프로그램을 개발하였다. 본 프로그램을 이용하여 엔진 내부 인자의 성능 분산을 보정하기 위해 필요한 각 배관에서의 보정용 여유차압을 산정하는 방법을 제시하였다. 또한 이를 활용하여 기존의 엔진 보정 방법을 보완하여 보정용 차압을 최적화하고 이를 통해 펌프 토출압을 감소시키거나 연소실의 연소압을 높임으로써 전체 엔진의 비추력 향상을 꾀할 수 있는 보정 방법을 제시하였다.