• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.98-103
• /
• 1999

The application field of porous mold is more and more expended. A mixture of alumina and cast iron is used for making porous mold using slip and vacuum casting method in this study. Slip casting is a process that slurry is poured into silicon rubber mold, dried in vacuum oven, debinded and sintered in furnace, In this procedure, slurry is composed of powder, binder, dispersion agent, and water. Vacuum casting is a technique for removing air bubbles existed in the slurry under vacuum condition. Since ceramics has a tendency of over-shrinkage after sintering, cast iron is used to compensate dimensional change. The results shows that sintering temperature has a great effect on characteristics of alumina-cast iron composite sintered parts. Finally ceramic-metal composite sintered mold can be used for aluminum alloy casting of shoe mold using this process.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.63-74
• /
• 1997

Polyurethane microcapsules were synthesized by interfacial polymerization in an aqueous poly(ethylene glycol) dispersion with ethylenediamine as chain extender of toluene diisocyanate in perfume oil using poly(vinyl alcohol) as the stabilizing agent. The effect of chemical structure on the average particle size and distributions, morphologies, and thermal properties to design microcapsules for the sustained release system was investigated. It came to be known that polyurethane microcapsules with ethylene diamine as chain extender had a rounder, more permeable and controlled release membranes. And the release test of polyurethane microcapsules with different soft segment content was done to certify the effect of long methylene chain. According to the higher molecular weight of polyether polyol, the release rate of microencapsulated disperse dye molecular was faster.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.52-62
• /
• 1997

Abstract Polyurethanes have been designed and fabricated into membranes with unique separation properties. Moreover, polyurethane microcapsules also have been reported actively as controlled release materials for their excellent blood compatibility, tensile strength and permeability. In this study, polyurethane microcapsules were synthesized by interfacial polymerization in an aqueous poly(ethylene glycol) dispersion of toluene diisocyanate in perfume oil using poly(vinyl alcohol) as the stabilizing agent. The effect of a few important process conditions on the average particle size and distributions, morphologies, and thermal properties to design microcapsules for the sustained release system was investigated.

• Journal of Information Display
• /
• 제5권4호
• /
• pp.23-26
• /
• 2004

A limitation of oxide cathode is the high current density, caused by low electrical conductivity of an emitter layer. This limitation can be overcome by increasing the conductivity, and uniform dispersion of Ni powder and pore agent could be achieved by using the screen-printing method. This new cathode has shown not only high current density reliability but also improved performance characteristics and as such given the name "Multi-Function cathode". It is expected to be a good replacement of the impregnated cathode.

• Journal of Pharmaceutical Investigation
• /
• 제20권3호
• /
• pp.129-134
• /
• 1990

Gelatin microcapsules containing Ftorafur, a hydrophilic anticancer agent, were prepared with congealable disperse-phase emulsification method. The preparation was based on dispersion of ftorafur-gelatin solution with Tween #40 or Span #20 in liquid paraffin. A cationic surfactant, benzethonium chloride, was used to prevent the microcapsules from aggregation. In the case of microcapsules prepared with Tween #40 or Span #20, mean particle size decreased and narrow size distribution was observed. The intrinsic dissolution rate of ftorafur in microcapsules with 1% span #20 was 8.5 times lower than that of intact ftorafur.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.103-111
• /
• 1998

Au fine particle dispersed TiO2 film was prepared on silica glass substrate by sol-gel dip and firing process. The films were fabricated from the system of titanium tetraisoproxie-EtOh-HCl_H2O-hydrogen tetrachloroaurate(III) tetrahydrate. The conditions for the formation of the clear solution and dissolving high concentration of Au compound were examined. And a photoreduction process was adopted to control the size of gold metal particles. Phase evolution of matrix TiO2 and variation of Au particle with UV irradiation were investigated by XRDA, SEM, TEM and UV-visible spectrophotometer. And the effect of CPCl(Cetylpyridinium chloride monohydrate) as a dispersion agent was evaluated.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.14.1-14.1
• /
• 2009

We found a high yield synthetic route to organic-soluble metal nanoparticles in the concentrated organic phase. The organic phase contains metal salt, amines, fatty acids, nonpolar solvent, and reducing agent. Even using only generic chemicals, organic-soluble silver and copper nanoparticles could be easily obtained by this simple and rapid reaction scheme at large scale. The hydrocarbon-protected metal nanoparticles showed excellent dispersion properties and were successfully printed onto polymer substrates. The printed pattern was heated at $200^{\circ}C$, which showed very low specific electrical resistance (< 10 uOhm$\cdot$cm), sufficient for conducting line of various printable devices.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.193-199
• /
• 2022

In this study, lenses are fabricated using various nanomaterials as additives to a silicone polymer made with an optimum mixing ratio and short polymerization time. In addition, PVP is added at a ratio of 1 % to investigate the physical properties according to the degree of dispersion, and the compatibility with hydrophobic silicone and the possibility of application as a functional lens material are confirmed. The main materials are SIU as a silicone monomer, DMA, a hydrophilic copolymer, EGDMA as a crosslinking agent, and 2H2M as a photoinitiator. Holmium (III) oxide, Europium (III) oxide, aluminum oxide, and PVP are used. When Holmium (III) oxide and Europium (III) oxide are added based on the Ref sample, the characteristics of the lens tend to be similar overall, and the aluminum oxide shows a tendency slightly different from the previous two oxides. This material can be used as a silicone lens material with various nano oxides and polyvinylpyrrolidone (PVP) acting as a dispersant.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.319-319
• /
• 2006

RAFT polymerization can produce under controlled conditions polymer chains incorporating well-defined chain ends. By designing a simple way of producing functional RAFT agents, a variety of ${\Box}-end$ groups was successfully introduced onto hydrophilic polymer chains. The ${\Box}-end$ group being a thiocarbonyl thio function was used as efficient chain transfer agent in dispersion or emulsion polymerization to produce original functional latex particles.

• 청정기술
• /
• 제29권4호
• /
• pp.327-332
• /
• 2023

본 연구에서는 바이오가스 수증기 개질을 통한 합성가스 생산에 관해 연구했다. Ni-Al₂O₃ 및 Ni-CeO₂ 촉매는 공침법으로 제조되었으며 침전제 주입 속도가 조절되었다. 온도에 따른 촉매 성능 테스트는 CH₄:CO₂:H₂O = 1:0.67:3의 가스 조성비와 647,000 mL h^-1 gcat^-1의 공간속도에서 진행하였다. 침전제 주입 속도는 촉매 특성에 영향을 미쳤으며, 지지체 종류에 따라 결과를 보였다. 온도가 증가함에 따라 이산화탄소 개질 반응과 reverse water gas shift 반응이 일어났다. 수증기가 충분히 공급되는 조건에서는 침전제를 한 번에 투입하여 제조된 Ni-Al₂O₃ 촉매가 높은 Ni 분산도에 기인하여 가장 우수한 성능을 보였다.