• 인지과학
• /
• 제23권1호
• /
• pp.73-95
• /
• 2012

주의분산, 기다려야 하는 이유의 제공 여부, 그리고 시간 단서가 주관적 시간 판단에 미치는 영향을 검증해보기 위한 두 실험을 실시하였다. Maister(1985)[1]가 제안하는 기다림 경험의 특징에 근거하여 실험 1에서는 주의분산과 기다리는 이유의 제공 여부의 효과를 전망적 추정법과 회고적 추정법으로 확인해보았다. 전반적으로 객관적 시간에 비해 주관적 시간을 과대추정하는 것으로 나타났으나, 주의분산 정도와 이유 제공 여부가 모두 유의한 차이를 초래하였다. 즉, 주의분산이 적어 시간에 주의를 많이 기울일수록 그리고 이유를 제공하지 않을 때 주관적 시간을 더 길게 추정하였다. 그러나 두 변인 간의 상호작용은 없었으며, 추정법에 따른 차이도 없었다. 실험 2에서는 기다리는 시간의 단서가 주어졌을 때 변인들의 효과를 검증하였다. 그 결과 실험 1과 마찬가지로 주의분산 정도와 이유 제공 여부가 유의한 차이를 보였고, 시간 추정법 간에도 유의한 차이가 나타났다. 특히 세 변인 간의 삼원 상호작용이 유의하게 나타났다. 종합적으로 두 실험의 결과는 기다려야 하는 이유가 명확할수록, 비시간적 정보에 주의를 많이 분산할수록, 추정하는 주관적 시간이 줄어드는 경향을 나타냈다. 그리고 시간흐름의 단서가 존재할 때 두 요인의 효과가 더 커지며 특히 회고적 추정에서 그러하였다. 마지막으로 기다림이라는 부정적 경험을 감소시킬 수 있는 방안과 추후 연구의 필요성을 논의하였다.

• 상하수도학회지
• /
• 제30권2호
• /
• pp.167-177
• /
• 2016

This work investigated the decomposition of aqueous anatoxin-a originated from cyanobacteria using an underwater dielectric barrier discharge plasma system based on a porous ceramic tube and an alternating current (AC) high voltage. Plasmatic gas generated inside the porous ceramic tube was uniformly dispersed in the form of numerous bubbles into the aqueous solution through the micro-pores of the ceramic tube, which allowed an effective contact between the plasmatic gas and the aqueous anatoxin-a solution. Effect of applied voltage, treatment time and the coexistence of nutrients such as $NO_3{^-}$, $H_2PO_4{^-}$ and glucose on the decomposition of anatoxin-a was examined. Chemical analyses of the plasma-treated anatoxin-a solution using liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC) were performed to elucidate the mineralization mechanisms. Increasing the voltage improved the anatoxin-a decomposition efficiency due to the increased discharge power, but the energy required to remove a given amount of anatoxin-a was similar, regardless of the voltage. At an applied voltage of 17.2 kV (oxygen flow rate: $1.0L\;min^{-1}$), anatoxin-a at an initial concentration of $1mg\;L^{-1}$ (volume: 0.5 L) was successfully treated within 3 min. The chemical analyses using LC-MS and IC suggested that the intermediates with molecular weights of 123~161 produced by the attack of plasma-induced reactive species on anatoxin-a molecule were further oxidized to stable compounds such as acetic acid, formic acid and oxalic acid.

• 폴리머
• /
• 제26권3호
• /
• pp.316-325
• /
• 2002

비상용성 LDPE/PS 블렌드계 (86.5/l3.5 vol%)를 내부 혼합기를 사용하여 만들었고 레오미터 (rheometer)와 scanning electron microscope (SEM)으로 분산상인 droplet들의 변형과 합체 (coalescence)거동에 대하여 살펴보았다. 혼합 초기에 일정한 크기의 droplet들이 서로 뭉쳐졌고 큰 변형 하에서 실모양 (thread-like)을 나타냈다. 본 실험에 사용한 LDPE/PS 블렌드계의 critical capillary number를 De Bruijn의 실험식으로 계산한 결과 0.96이었고 local capillary number는 3.867이었다. 또한 블렌드 시편을 $200^{\circ}C$에서 다양한 시간으로 서냉한 후 서냉 시간에 따른 형태의 변화를 관찰하였다. $200^{\circ}C$에서 ${\gamma}$=1789일 때 최대 크기의 droplet이 관찰되었고 특히 서냉 시간이 15분일 때 형태의 파괴 (break-up)가 일어났다. Droplet의 합체에 결정적인 영향을 미치는 것은 기질의 점도이다.

• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.573-583
• /
• 2005

Fugitive dust, which is emitted in the ambient air without first passing through a stack or duct designed to control flow, is frequently generated by means of wind erosion from storage yards at Pohang Steel Wokrs. The size distribution of fugitive dust is mostly in the range of coarse particulate which is deposited as soon as emitted and less harm to human health; however $20\%$ of fugitive dust contains PM 10 known as one of most harmful airborne pollutant. Consequently, effective control and reduction of fugitive dust is strongly requested by the local society, but it is not easy so far because the generation and dispersion of fugitive dust highly depends on meteorological conditions, and it being occurred for irregularity. This research presented a fugitive dust control system for each meteorological condition by providing statistical prediction data obtained from a statistical analysis on the probability of generating the threshold velocity at which the fugitive dust begins to occur, and the frequency occurring by season and by time of the wind direction that can generate atmospheric pollution when the dispersed dust spreads to adjacent residential areas. The research also built a fugitive dust detection system which monitors the weather conditions surrounding storage yards and the changes in air quality on a real-time basis and issues a warning message by identifying a situation where the fugitive dust disperses outside the site boundary line so that appropriate measures can be taken on a timely basis. Furthermore, in respect to the spraying of water to prevent the generation of fugitive dust from the storage piles at the storage yard, an advanced statistical meteorological analysis on the weather conditions in Pohang area and a case study of fugitive dust dispersion toward outside of working field during $2002\∼2003$ were carried out in order to decide an optimal water-spraying time and the number of spraying that can prevent the origin of fugitive dust emission. The results of this research are expected to create extremely significant effects in improving surrounding environment through actual reduction of the fugitive dust produced from the storage yard of Pohang Steel Works by providing a high-tech warning system capable of constantly monitoring the leakage of fugitive dust and water-spray guidance that can maximize the water-spraying effects.

• Journal of Pharmaceutical Investigation
• /
• 제35권4호
• /
• pp.233-241
• /
• 2005

Ursolic acid (UA), a bioactive triterpene acid, has been known to increase collagen content in human skin in addition to other actions such as anti-inflammatory, skin-tumor prevention and anti-invasion. However, it is poorly soluble in water. Therefore, we firstly prepared microemulsion system with benzyl alcohol, ethanol and Cremophor EL, RH 40 and Brij 35 as surfactant in order to increase solubility of UA and then prepared microemulsion was dispersed in o/w cream base for the topical delivery of UA in an effort to improve anti-wrinkle effect. The pseudo-ternary phase diagrams were developed and various microemulsion formulations were prepared using benzyl alcohol as an oil, Cremophor EL, RH 40 and Brij 35 as a surfactant. The droplet size of microemulsions was characterized by dynamic light scattering. The accumulation of VA in the skin from topical cream was evaluated in vitro using hairless mouse skins. The mean droplet size was $26.8{\pm}6.6$ nm for microemulsions II with Cremophor EL. All UA creams showed pseudoplastic flow and hysterisis loop in their rheogram, depending on the type of materials added in topical creams. The in vitro accumulation data demonstrated the UA topical cream prepared with the combination of Poloxamer 407 and Xanthan gum as a copolymer showed higher accumulation percentage than those prepared with either Poloxamer 407 or Xanthan gum. These results suggest that UA topical cream using microemulsion systems may be promising for the topical delivery of UA.

• 청정기술
• /
• 제19권3호
• /
• pp.243-248
• /
• 2013

열전도성 복합재료는 방열특성이 요구되는 다양한 분야에 응용되고 있다. 그래핀은 우수한 전기전도성, 기계적 특성, 열전도 특성을 가지는 잠재성이 높은 물질이다. 그러나 기존의 그래핀 입자를 사용한 경우에서는 유기용매를 이용하여 분산을 하게 되어 청정생산공정측면에서 이를 개선하는 연구가 필요하다. 본 연구에서는 마이크로플루이딕(microfluidic)으로 균일한 미립자를 제조하는데 있어 계면안정제를 도입하여 수분산을 통한 그래핀 용액을 연속상(water phase)으로 사용하여 표면에 그래핀이 분포된 폴리메틸메타크릴레이트(Poly(methyl methacrylate), PMMA)미립자를 제조하였다. 본 연구의 제조방법은 소량의 그래핀으로 열전도 특성이 향상되어 열전도성 복합재료로 사용이 가능하다.

• 한국수산과학회지
• /
• 제38권5호
• /
• pp.331-341
• /
• 2005

Distribution of anchovy (Engraulis japonica) eggs and larvae was studied in the southwestern sea of Korea in July and November, 2001. Anchovy eggs were found mainly in the oceanic fronts of the northern sea area which were formed in the offshore area of Chuja Is. Bogil Is. and Chungsan Is. from west to east. Anchovy eggs were also found in the surrounding sea of Cheju Is. in the southern sea front area. The waters were highly heterogeneous and the water masses were bordered based on temperature $(10.8-26.4^{\circ}C)$ and salinity (28.9-33.7 psu). The anchovy eggs were mostly found outside of the China Coastal Water, where salinity was below 31 psu. The anchovy eggs were not found in November. Abundance of the anchovy larvae were higher in July than November. Temperature ranged from $10.8^{\circ}C\;to\;25.9^{\circ}C\;and\;15.9^{\circ}C\;to\;20.5^{\circ}C$, and salinity ranged from 28.9psu to 34.1psu and 33.2psu to 34.1psu in July and November, respectively. Non-swimmable larvae were found throughout the whole area of the southwestern sea of Korea. The area beyond the oceanic front had anchovy eggs dispersed from the spawning grounds to offshore. Dispersion pattern showed that the eggs were transported from the spawning grounds with a process of advection and diffusion based on the flow pattern which were caused by winds. Distribution pattern of the anchovy eggs and larvae may be used for the prediction of oceanic currents in each area.

• Macromolecular Research
• /
• 제17권2호
• /
• pp.110-115
• /
• 2009

The electrical, morphological and rheological properties of melt and dry mixed composites of poly ethylene (PE)/graphite (Gr), polypropylene (PP)/Gr and PP/nickel-coated carbon fiber (NCCF) were investigated as a function of filler type, filler content and processing temperature. The electrical conductivities of dry mixed PP/NCCF composites were increased with decreasing processing temperature. For the melt mixed PP/NCCF composites, the electrical conductivities were higher than those of the melt mixed PE/Gr and PP/Gr composites, which was attributed to the effect of the higher NCCF aspect ratio in allowing the composites to form a more conductive network in the polymer matrix than the graphite does. From the results of morphological studies, the fillers in the dry mixed PP/NCCF composites were more randomly dispersed compared to those in the melt mixed PP/NCCF composites. The increased electrical conductivities of the dry mixed composites were attributed to the more random dispersion of NCCF compared to that of the melt mixed PP/NCCF composites. The complex viscosities of the PP/Gr composites were higher than those of the PP/NCCF composites, which was attributed to the larger diameter of the graphite particles than that of the NCCF. Furthermore, the fiber orientation in the 'along the flow' direction during melt mixing was attributed to the decreased complex viscosities of the melt mixed PP/NCCF composites compared those of the melt mixed PP/Gr composites.

• 한국지반환경공학회 논문집
• /
• 제13권6호
• /
• pp.5-17
• /
• 2012

초연약 지반의 개량을 위한 중장비의 안전한 주행성 확보를 위해 제일 우선적으로 검토되어야 하는 표층처리공법에 대한 연구는 아직 미진하며 표층처리공법 설계 시 건설기계의 반복적인 주행으로 인한 소성침하를 고려하지 못하고 있다. 따라서 본 연구에서는 표층처리공법에서 가장 많이 사용하고 있는 보강재인 지오텍스타일, 인장강도가 200kN/m와 100kN/m인 지오그리드와 대나무망으로 보강한 후 1.0m의 모래로 복토한 지반에서 현장 평판재하시험과 반복 평판재하시험을 실시하여 각 보강재별 지지력과 거동양상을 비교 평가하고자 한다. 평판재하시험 결과 대나무망을 사용하였을 경우 다른 보강재를 사용하였을 때보다 BCR값이 최대 1.5배 증가하였다.

• 한국식품과학회지
• /
• 제16권2호
• /
• pp.153-158
• /
• 1984

치즈의 융해정도(融解程度)(meltability)를 측정하는 전통적인 방법중 대표적인 2가지 방법, 즉 Schreiber방법과 Arnott방법을 비교 검토하였다. 같은 시료에 대해 두가지방법이 서로 다른 융해정도(融解程度)를 나타내었다. Schreiber 방법에서는 sharp Cheddar가 가장 높은 값을 나타내었으며, 그 다음으로 process American, mild Cheddar, Mozzarella의 순(順)이었고. Arhott 방법에서는 그 순서가 바뀌어서 Mozzarella, mild Cheddar, sharp Cheddar. process American의 순(順)이었다. Process cheese product는 분산(分散)된 값들을 보여 일정한 경향을 나타내지 못하었다. 두가지 방법 모두 일정시간(一定時間) 가열시(加熱時)에는 일정(一定)한 융해정도(融解程度)를 보여주었으며 이것은 scorching이나 case hardening에 의해 더 이상의 흐름을 방지(防止)하였기 때문으로 생각된다. DSC-Thermogram은 14도와 30도 근처에서 endothermal peak를 보여주었다. 이들은 가열시(加熱時) 유지방(乳脂肪)의 융해(融解)에 의한 것으로 설명된다.