• 한국연소학회지
• /
• 제1권2호
• /
• pp.9-20
• /
• 1996

We construct a mobile broadband coherent anti-Stokes Raman spectroscopy system to measure the temperature of combustion gases. To improve the accuracy of CARS temperatures due to Stokes lasers, a modeless dye laser is constructed. A monochromator to disperse CARS spectra is also constructed in the spectrometer for easy portability. The accuracy of CARS temperature, measured in graphite tube furnace in reference to a radiation pyrometer, is better than 2 % from 1000 K to 2400 K. The CARS temperature error due to the variation of the spectral distribution of the modeless laser is measured to be less than 1.5 % during five hours operation. As a demonstration of combustion diagnosis, we applied the spectrometer to measure the temperature distribution of the propane air premixed flame.

• Nuclear Engineering and Technology
• /
• 제4권2호
• /
• pp.90-101
• /
• 1972

Polyester 직포 표면을 친수화하기 위하여 함침법에 의하여 acrylic acid를 방사선 graft 공중합시켰다. 이때 함침된 직포를 질소에서 Co-60감마선으로 조사하였다. 생성된 Homopolymer는 10$0^{\circ}C$의 물에 의하여 대체로 유출되었다. Graft된 직포는 산성, 염기성 또는 분산염료에 대하여 재래식 저온 침염법에 의해서 염색이 잘 되었다.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.356-361
• /
• 2010

This study was aimed to investigate the antibacterial efficiency of silver nano-particles and the dyeing properties of a brushed warp-knitted fabric. The properties of the brushed warp-knitted fabric containing silver nano-particle by field production processes were evaluated by analyzing its silver contents, antibacterial activity, color difference, exhaustion curve, fastness and tearing strength. Bacterial reduction ratio amounts to 91.4 and 99.9 for Staphylococcus aureus and Klebsiella pneumoniae respectively. As the brushed pile length of its fabrics is longer, the exhaution rate of disperse dye becomes higher. The brushing process of its fabrics reduces the tearing strength. The results indicate that the brushed warp knitted fabric containing silver nano-particle can be a practically promising product.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.94-100
• /
• 2010

Colored compounds adsorption from the textile dyeing effluents on activated carbons produced from various indigenous vegetable sources by zinc chloride activation is studied. The most important parameters in chemical activation were found to be the chemical ratio of $ZnCl_2$ to feed (3:1), carbonization temperature (460-470 $^{\circ}C$) and time of activation (75 min). The absorbance at 511 nm (red effluent) and 615 nm (blue effluent) are used for estimation of color. It is established that at optimum temperature ($50^{\circ}C$), time of contact (30-40 min) and adsorbent loading (2 g/L), activated carbons developed from rain tree (Samanea saman) saw dust and blackberry (Randia formosa) tree saw dust showed great capability to remove color materials from the effluents. It is observed that adsorption of reactive dyes by all types of activated carbons is more than that of disperse dyes. It is explained that because of its acidic nature the activated carbon can adsorb better reactive dye particles containing large number of nitrogen sites and $-SO_3Na$ group in their structure. The use of activated carbons from the indigenous biomass would be economical, because saw dusts are readily available waste worldwide.

• 한국염색가공학회지
• /
• 제15권2호
• /
• pp.59-67
• /
• 2003

PTT[poly(trimethylene terephthalate)] fiber was annealed by passing on the plate heater to illuminate the effects of annealing on the mechanical properties and dyeability with varying the treatment temperature for 0.5 second. The apparent crystal sizes and crystallinity were increased with increases in temperature. With the increases of the temperature, the dynamic viscoelastic behaviors were analyzed to be reduction in $T_{max} (tan{\delta})$. The initial modulus were observed to be a small enhanced. The shrinkage in hot water were reduced. The dyeability for disperse dye enhanced dramatically, for example, a satisfactory degree of exhaustion was obtained by dyeing at $95^\circ{C}$ for 30 min with the PTT fibers heat treated at $180^\circ{C}$.

• 한국염색가공학회지
• /
• 제7권3호
• /
• pp.11-14
• /
• 1995

열처리 온도를 각각 다르게 한 Poly(ethylene terephthalate)에 반응기 내의 처리 조건이 서로 다른 두 가지 플라즈마 장치를 사용하여 산소 저온 플라즈마 처리를 했다. 열처리 온도가 플라즈마 감량에 미치는 영향은 열처리 온도가 증가함에 따라 결정화도도 증가하지만 감량율은, 열처리 온도가 16$0^{\circ}C$까지는 감소하다가 16$0^{\circ}C$ 이상에서는 증가하는 경향을 보이며, 분산염료에 의한 Poly(ethylene terephthlate) 섬유의 염색특성과 유사한 거동을 나타냈다.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.321-326
• /
• 2004

[ $TiO_2$ ] contents in yarns can influence color yield so that dyeing quality of industrial polyethylene terephthalate (PET) yarns can be improved through the adjustment of $TiO_2$ contents. To evaluate the dyeing performance of color yield, the chips which included the different $TiO_2$ contents of 330,550, and 1,100 ppm respectively were used to produce the yarns of different $TiO_2$ content by a spin-draft machine. The physical and structural properties of the yarns were measured to investigate effect of the $TiO_2$ contents on them. Dye uptake and dyeing rate were also evaluated using a colorimeter to compare the yarns having different TiOz contents. The experimental results showed that there were no appreciable variation in physical and structural properties among the yarn samples and no difference were observed among the dyed fabric samples with regard to dyeing uptake and dyeing rate. However, the color yield of dyed fabrics increased as $TiO_2$ contents decreased in the yarns especially when the fabric samples were dyed to pale shade. The physical reasoning could be proposed on why the yarns having low $TiO_2$ contents appeared to have higher color yield after dyeing.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.147-154
• /
• 2019

In this study, poly(ethylene terephthalate)(PET) fibres dyed with Disperse Red 167 using supercritical $CO_2$ technology. The purpose of this study was to investigate relationship between PET fibers and supercritical $CO_2$ during dyeing. The effects of temperature, pressure, dyeing time and mass ratio between the dye and PET in the dyeing chamber were considered. Thermal and mechanical properties of the fibers were investigated. Tensile strength of dyed PET fibers decreased at higher temperature and pressure conditions. DSC and DMA results indicated that the Tg and Tm values decreased significantly when compared to the pure PET fibers. However, uniformly dyed PET fibers were typically observed.

• 한국의상디자인학회지
• /
• 제16권4호
• /
• pp.229-235
• /
• 2014

This study conducted a research on burn-out printing convergence technology for cellulose blend knit fabrics. Printing technology, which forms color pattern on the fabric, can be generally classified into four according to printer or printing method, e.g. screen printing, roller printing, rotary printing, digital printing. However, these printing methods are flat in design or pattern, which have limitation to overcome monotonousness of fabric, so that recently burn-out process method, which expresses three-dimensional pattern effect by treating chemical on the surface of fabric as the method to appeal its esthetics to the customers. Particularly, in case of cellulose/polyester composite material, first, it is proceeded in 2 processes, by dyeing cellulose or polyester fabric and burning out cellulose fabric, in this process, due to pollution caused by disperse dye migration, color of polyester fabric part could be discolored, which has high falt risk. This research considered coloring burn-out technique, which simultaneously proceed dyeing and burn-out by reducing dyeing and burn-out process to 1 stage, which were proceeded in 2 stages previously. As the research result, it was confirmed that reasonable depth of roller was 0.04~0.06mm in roller printing process, heat treatment condition of burn-out far-infrared radiation was $185^{\circ}C{\times}30m/min$. Color fastness to washing was confirmed to be 4-5 grade, color fastness to rubbing, 3-4 grade, color fastness to light, 4 grade. Also, it was confirmed that energy reduction effect appeared 38.19%, in case of energy cost per yard compared to the existing production, also, 19.74%, in case of production cost.