• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.532-540
• /
• 2019

PET microfibers with various diameters (0.5, 0.2, 0.06, and 0.01 dpf) were dyed with a dispersed dye (C.I. Disperse Blue 56) at various temperatures. The dyeing process was conducted under infinite dyebath conditions at constant temperatures. The effects of the dyeing temperature and diameter on the partition coefficient, affinity, and diffusion coefficient of disperse dyes were studied. The curve of isotherms was fitted well to Nernst-type model in a large range of initial dye concentrations. At the same temperature, the partition coefficient and affinity decreased with increasing sample diameter due to the increase in surface area. At all deniers, the partition coefficient and affinity decreased with increasing temperature because the dyeing process is an exothermic reaction. In addition, the decrease in radius of the sample gives rise to a decrease in the heat of dyeing. The fine diameter of the sample resulted in an increased surface area but decreased space between the microfibers. Consequently, decreasing the diameter of the microfibers leads to a decrease in the diffusion coefficient. At the same diameter, the diffusion coefficient increased with increasing temperature because of rapid dye movement and the large free volume of the sample inside. In addition, thermal dependence of the diffusion coefficient increased when the diameter of the sample increased.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.13-14
• /
• 2008

In black dyeing of PET fabric, high concentrations of disperse dyes of three primary color are generally used, which leads low exhaustion level of dye and discharge of a large amount of unfixed dye into dyehouse effluent. In this study, the effect of combination ratio of dye concentration, liquor ratio, and dyeing pH on dyeing and color property of black dyed PET fabric was investigated.

• Textile Coloration and Finishing
• /
• v.5 no.2
• /
• pp.99-108
• /
• 1993

In one dyeing system of silk/synthetic blend fabrics (polyester, nylon, acetate) with acid dyes/disperse dyes, dyeability and desorptibility of disperse dyes on silk fabric and transfer from dyed silk fabrics to synthetic fabrics by color difference were examined. When silk dyed with C.I. Disperse Red 19 and C.I. Disperse Red 60 at 10$0^{\circ}C$ for 60 minutes, color difference of dyed silk were $\Delta$E=56.72, $\Delta$E=47.65 for blank silk, respectively. The desorption rate of the dyed silks were measured in boiling bath with and without dye-free synthetic fibers. The desorption rate of dyed silk was effected by affinity of synthetic fabrics contained. When silk dyed with Red 19 and Red 60 was reduced at 10$0^{\circ}C$ for 60 minutes, the decolouration rates of dyed silk were 75% and 40%, respecdtively.

• Clean Technology
• /
• v.17 no.2
• /
• pp.110-116
• /
• 2011

The dyeing of polyester fiber with two different disperse dyes (Disperse Red 60 and Disperse Yellow 54) was carried out using supercritical carbon dioxide ($SCCO_2$) as a dyeing medium at temperatures ranging from $50^{\circ}C$ to $90^{\circ}C$ and at pressures from 15 MPa to 30 MPa. The dye uptake of Disperse Red 60 on polyester fiber was found to increase with temperature at constant pressure and $SCCO_2$ density (700 kg/$m^3$). At $90^{\circ}C$ and 30 MPa, the dye uptake on polyester fiber increased with dyeing time and the saturation concentration of Red 60 was attained within 240 min, while a longer dyeing time was required for Yellow 54 to reach its saturation concentration. When dyestuff mixtures with mixing ratios of 0.01 to 9.0 (Red 60/Yellow 54) were used, the uptake ratio of the two dyes was found to be proportional to 0.26 power of their mixing ratio. Dyed fibers showed an orange color and the depth of the color depended upon the mixing ratio of the dyestuffs.

• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.151-157
• /
• 1999

The study was investigated the improved printing effect of heat transfer ability for the cotton fabric treated with disperse dyes. Some important factors were studied to determine the most optimal conditions such as concentration of dye, treated time and temperature, after treatment and before treatment using swelling agent, and molecular weight of dye. The fastness to laundering and light for heat transfer printing was measured.The optimal conditions of heat transfer printing for cotton fabric treated with disperse dye were concentration of 5% owf, treated temperature of $200^{\circ}C$, treated time of 3 minute. The diffusion of disperse dyes inside cotton fabric was accelerated as a result of swelling agent such as glycerin, ethylene glycol, tetramethylene glycol, propylene glycol using in this study. The effects of heat transfer printing were increased that the increasement of before treatment time for swelling agent, decrease of molecular weight of dye.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.39-47
• /
• 2003

Phosphorescent PET/liquid color films and phosphorescent PET/disperse dyes films were prepared by melt casting method using Hot press. Then, weight ratios and exhaustion percent of films were 0.7, 1.2, 1.5, 2.0, and 2.3 wt.%. The effects of L/C and D/D contents(wt.%) of films on the thermal properties, crystal structure, H(%), brightness$(mcd/mm^2)$, morphology, and tensile properties were investigated by means of DSC and WAXD, etc. It was found that the melting temperature and crystalline diffraction peaks were not changes with increasing the liquid color contents and disperse dyes exhaustion. Also, in case of using liquid color to phosphorescent PET film, the H(%) and brightness$(mcd/mm^2)$ value were superior to phos.PET/disperse dyes film. The tensile strength and the tensile modulus were decreased with increasing the contents of liquid color and exhaustion of disperse dyes in the phosphorescent PET film. Also, the elongation at break was increased with increasing the contents of liquid color and exhaustion of disperse dyes in the phosphorescent PET film.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.140-144
• /
• 2010

In this study, we investigated the clean appearance and good stretch properties. Usually, clean appearance concerned with the dyeing properties of core and effect yarns. The dyeing properties between core yarn (conjugate yarn) and effect yarn were determined by the build-up and the color differences using the four different yarns of SDY FD(spindraw yarn full dull), SDY CD(spindraw yarn cation dyeable), POY FD( partially-oriented yarn full dull) and POY CD(partially-oriented yarn cation dyeable). We used the single color dye of C. I. Disperse Blue 79 and mixed colors made by C. I. Disperse Red 60, C. I. Disperse Blue 56, and C. I. Disperse Yellow 54.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.31-37
• /
• 1995

Effects of glycol pretreatment conditions such as concentration and molecular weight of glycols and dye types of different constitutions on the degree of transfer were investigated when transfer printed onto the cotton fabric with disperse dyestuffs. Obtained results are as follows ; 1. Although the degree of transfer increases linearly with temperature a time, above a certain critical point, they show decremental aspects for both of C.I. Disperse Orange 3 and C.I. Diperse Violet 1. 2. Degree of transfer increases with molecular weight of glycols, but PEG 200 which has a moleular weight 200 and boiling point of 300$^{\circ}C$ is more effcient than that of lower molecular weight. 3. Degree of tansfer for the C.I. Disperse Orange 3 having constitution of azo benzene type is somewhat higher than that of C.I. Disperse Violet 1 of amino anthraquinone.

• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.1-10
• /
• 2005

Disperse dyes derived from heterocyclic compounds such as phenylindole, pyridone, diaminopyridine, and carbazole have been known to exhibit high light fastness and bathochromic shift compared to the coursponding aminoazobenzene. The synthetic method to obtain diaminopyridine derivatives, which can be used as coupling components, was chlorination of pyridone with phosphorous oxychloride, followed by substitution with various primary amines. Four azo disperse dyes were synthesized by coupling four diaminopyridines with 2-cyano-4-nitroaniline as a diazo component. Structures of these dyes were confirmed by $^1H$ NMR spectroscopy. The wavelengths of maximum absorption of the synthesized disperse dyes were in the range of $517\~528nm$, and molar extinction coefficients were $45,700\~50,100$. The dyeability of four disperse dyes toward PET fiber was generally good. Wash and rubbing fastnesses were excellent, while light and dry heat fastness were good.

• Textile Coloration and Finishing
• /
• v.12 no.4
• /
• pp.248-255
• /
• 2000

Polyester fibers and fabrics have been dyed with disperse dyes in alkaline dyebath such as alkaline buffer and alkaline auxiliary(JPH-95) comparing a traditional acidic dyeing. After dyeing the samples were extracted with 100% DMF, and washing and rubbing fastnesses were measured. In dyeing at $100^\circ{C}$ the dyeing rate increased with decreasing fiber denier, regardless of dye baths, whereas the dyeing rates of the same denier fiber increased in the order of alkaline dyeing>acidic dyeing>JPH-95 dyeing. In dyeing at $130^\circ{C}$ the dyeing rate of PET fiber in JPH-95 dye bath decreased compared with the other two types of dye baths. In the time and temperature curve the dye uptake of JPH-95 dyeing was higher than the other two types of dye baths in the range of low temperature$(95~115^\circ{C})$. The equilibrium dye uptake increased in the order of 0.52d>2.04d>0.05d fiber. Washing fastness had no change in all three types of dye baths. But rubbing fastness was not good for alkaline dyeing except black dyes.