• 한국정보통신학회논문지
• /
• 제23권1호
• /
• pp.84-89
• /
• 2019

JPEG은 가장 널리 사용되는 이미지 압축 표준 기술이다. 본 논문에서는 JPEG 이미지 압축 알고리즘을 소개하고 압축 및 압축 해제의 각 단계를 서술하고자 한다. 이미지 압축은 디지털 이미지를 데이터 압축을 적용하는 과정이다. 이산코사인변환은 시간 도메인에서 주파수 도메인으로 변환하는 기술이다. 먼저, 이미지는 8 by 8 픽셀 블록으로 분할하게 된다. 둘째, 위에서 아래로 왼쪽에서 오른쪽으로 진행하면서 DCT가 각각의 블록에 적용하게 된다. 셋째, 각 블록은 양자화를 통해 압축을 진행한다. 넷째, 이미지를 구성하는 압축된 블록의 행렬은 크게 줄어든 공간에 저장된다. 끝으로, 원하는 경우 이미지는 역이산코사인변환(IDCT)을 사용하는 프로세스인 압축 해제를 통해 재구성하게 된다. 본 연구에서는 이산코사인변환 기법을 이용해 이미지 압축/복원 및 재구성하는 것에 목적을 두고 있다.

• 방송공학회논문지
• /
• 제22권3호
• /
• pp.366-374
• /
• 2017

TV나 디지털 사이니지와 같은 화면표시장치들이 점점 커져감에 따라, 미디어의 종류가 UHD, 파노라마, 퍼즐형 미디어와 같은 광각의 미디어로 변하고 있다. 특히, 파노라마 및 퍼즐형 미디어는 스티칭을 통해 복수개의 카메라로 촬영된 비디오 클립을 합성한 형태로 구성된다. 그러나, 스티칭 과정의 처리 시간이 오래 걸리기 때문에 실시간 서비스에는 적용하기 어려운 문제가 있다. 따라서 본 논문에서는 스티칠 처리 시간을 감소하기 위한 방법으로, 영상간의 공간적 연관관계를 알려주는 2D Adjacency Matrix를 생성하는 것을 제안한다. Discrete Cosine Transform (DCT)를 사용하여, 비디오 소스의 각 프레임을 공간 영역에서 주파수 영역으로 변환 시킨다. 앞서 언급한 DCT 계수를 기반으로 효과적으로 이미지들의 공간적 연관관계를 알려주는 2D Adjacency Matrix를 생성한다. 본 논문에서는 각각의 비디오 클립들로부터 파노라마 영상과, 퍼즐형 미디어를 생성하기 위해 DCT를 이용한 2D Adjacency matrix 생성 방법을 제안한다.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.33-47
• /
• 1992

본 논문에서는 케이블로 지지된 프리스트레스트 콘크리트(PC) 뼈대의 시공중의 각 단계를 고려하고 콘크리트와 PC 강재, 케이블 재료의 시간의존적 특성 및 재료의 비선형성과 케이블의 색 및 구조물의 처짐에 의한 기하학적 비선형성도 고려하는 해석방법을 제시했다. 구조물의 비선형거동을 해석하기 위한 운동방정식은 Updated Lagrangian 방식을 이용하여 유도하고 시간의존적인 거동올 해석하기 위해서 시간영역을 시간단계로 나누어 순차적으로 적분했다. 시공중의 각 단계를 표현하기 위해 계속적인 구조계의 변화를 고려했다. 본 논문에서 제시한 해석방법에 근거하여 컴퓨터 프로그램 CFRAME을 개발하고 예제들을 통하여 해석방법의 정당성을 보였다.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.112-122
• /
• 1999

In realistic control systems the nonlinear saturation attributes of the control actuator due to physical limitations should be taken into account This nonlinear saturation of actuators may cause not only deterioration of the control performance but also a large overshoot during start-up and shut-down. As the overshoot increases the system may become oscillatory unstable. in this paper the supervisor implementation which guarantees good performance for saturation operation and prevents reset wind up is presented, Moreover the sufficient conditions of the stability for saturated system using supervisory control with a dynamic controller are provided in the continuous-time and in the discrete-time domain Numerical example is illustrated to depict the efficiency of supervisory control for a typical satuaurated production-distribution system controlled by a discrete-time dynamic controller and to validate basic results by simulation.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.36-43
• /
• 2001

In Korea, we are absolutely short of earthquake data in good quality from moderate and large earthquakes, which are needed fur the study of strong ground motion characteristics. This means that the best use of the available data is needed far the time being. In this respect, several methods are suggested in this paper, which can be applied in the process of data selection and analysis. First, it is shown that the calibration status of seismic stations can be easily checked by comparing the spectra from accelerometer and velocity sensor both of which are located at the same location. Secondly, it is recommended that S/N ratio in the frequency domain should be checked before discarding the data by only look of the data in time domain. Thirdly, the saturated earthquake data caused by ground motion level exceeding the detection limit of a seismograph are considered to see if such data can be used for spectrum analysis by performing numerical simulation. The result reveals that the saturated data can still be used within the dominant frequency range according to the levels of saturation. Finally, a technique to minimize the window effect that distorts the low frequency spectrum is suggested. This technique involves detrending in displacement domain once the displacement data are obtained by integration of low frequency components of the original data in time domain. Especially, the low frequency component can be separated by using discrete wavelet transform among many alternatives. All of these methods mentioned above may increase the available earthquake data and frequency range.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.27-33
• /
• 2003

In closed-die forging process, blocker has been used to fill and distribute metal well in finisher die. Generally, the blocker shape was determined by an expert with many experiences. However, the manual blocker design process takes much time and efforts, so various automatic methods for the blocker design process have been suggested for the last three decades. The method with filtering in FFT (Fast Fourier Transform) for the blocker design provides general solution than other methods. But, due to the properties of FFT in time-frequency domain, this method has some drawbacks such as long calculation time, difficulty of local control and additional boundary process after filtering. In this study, DWT (Discrete Wavelet Transform), which is more flexible and is more wildly used than FFT, is applied to the blocker design. The method with filtering in DWT is very proper to design blocker in both 2-D and 3-D shapes. To verify the efficiency of this method, blockers of some models are designed and the results show that blocker design with DWT is effective fer the blocker designs

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2471-2474
• /
• 2003

The modified discrete cosine transform (MDCT) and its inverse transform (IMDCT) are employed in subband/transform coding schemes as the analysis/synthesis filter bank based on time domain aliasing cancellation (TDAC). And they are the most computational intensive operations in layer III of the MPEG audio coding standard. In this paper, we propose a new efficient algorithm for the MDCT/IMDCT computation. It is based on the MDCT/IMDCT computation algorithm using the discrete cosine transforms (DCTs), and it employs two discrete cosine transform of type II(DCT-II) to compute the MDCT/IMDCT. In addition to, it takes advantage of ability in calculating the MDCT/IMDCT computation, where the length of a data block is divisible by 4. The proposed algorithm in this paper requires less calculation complexity than the existing methods. Also, it can be implemented by the parallel structure,, and its structure is particularly suitable for VLSI realization.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.404-409
• /
• 1998

In this paper, the discrete variable structure controller (DVSC) is proposed for vector controlled induction motor position control. The variable structure control (VSC) which guarantees accuracy and robustness in nonlinear control system is developed in discrete time domain for applying to real servo system. Furthermore, the load torque observer is introduced to reduce chattering problem. The computer simulation results are presented to verify the proposed control scheme.

• 한국CDE학회논문집
• /
• 제19권1호
• /
• pp.29-40
• /
• 2014

Conceptual Modeling is the process of abstracting a model from a real or proposed system. It is probably the most important aspect of a simulation study. Relate works show that the elementary developers devoted little time to understanding how the systems actually worked, namely they didn't build appropriate conceptual model. Thus, the result of simulation is inconsistent because it depends on developer's competence. Although many researchers suggested various techniques enabling developer to build conceptual model, there were several limitations. In this study, to overcome the limitations of existing techniques, we proposed COMBINE-DES (COnceptual Model BuildINg framEwork using ontology for Discrete Event Simulation). The COM-BINE-DES supports expediting the conceptual modeling with Solution ontology generated by Domain ontology and Simulation ontology. Moreover, it provides consistent simulation result regardless of repeated modeling.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.295-301
• /
• 2006

This paper presents a new two-terminal numerical algorithm for fault location estimation using the synchronized phasor in time-domain. The proposed algorithm is also based on the synchronized voltage and current phasor measured from the PMUs (Phasor Measurement Units) installed at both ends of the transmission lines. In this paper, the algorithm is given without shunt capacitance and with shunt capacitance using II -model and estimated using DFT (Discrete Fourier Transform) and LES (Least Error Squares Method). The algorithm uses a very short data window and classification for real-time transmission line protection. To verify the validity of the proposed algorithm, the Electro-Magnetic Transient Program (EMTP) and MATLAB are used.