• Journal of Astronomy and Space Sciences
• /
• v.31 no.1
• /
• pp.15-23
• /
• 2014

We present preliminary observations of the field-aligned-irregularities (FAIs) in the E and F regions during the solar minimum (2009 - 2010) using the 40.8 MHz coherent backscatter radar at Daejeon ($36.18^{\circ}N$, $127.14^{\circ}E$, $26.7^{\circ}N$ dip latitude) in South Korea. The radar, which consists of 24 Yagi antennas, observes the FAIs using a single beam with a peak power of 24 kW. The radar has been continuously operated since December 2009. Depending on the manner of occurrence of the backscatter echoes, the E-region echoes are largely divided into two types: quasi-periodic (QP) and continuous echoes. Our observations show that the QP echoes occur frequently above an altitude of 105 km in the post-sunset period and continuous echoes occur preferentially around an altitude of 105 km in the post-sunrise period. QP echoes appear as striated discrete echoes for a period of about 10 - 20 min. The QP-type echoes occur more frequently than the continuous-type echoes do and the echo intensity of the QP type is stronger than that of the continuous type. In the F region, the FAIs occur at night at an altitude interval of 250 - 450 km. As time proceeds, the occurrence height of the FAIs gradually increases until early in the morning and then decreases. The duration of the F-region FAIs is typically a few hours at night, although, in rare cases, FAIs persist throughout the night or appear even after sunrise. We discuss the similarities and differences of the FAIs observed by the Daejeon radar in comparison with other radar observations.

• Atmosphere
• /
• v.31 no.1
• /
• pp.113-141
• /
• 2021

The impacts of ice clouds on the energy budget of the Earth and their representation in climate models have been identified as important and unsolved problems. Ice clouds consist almost exclusively of non-spherical ice crystals with various shapes and sizes. To determine the influences of ice clouds on solar and infrared radiation as required for remote sensing retrievals and numerical models, knowledge of scattering and microphysical properties of ice crystals is required. A conventional method for representing the radiative properties of ice clouds in satellite retrieval algorithms and numerical models is to combine measured microphysical properties of ice crystals from field campaigns and pre-calculated single-scattering libraries of different shapes and sizes of ice crystals, which depend heavily on microphysical and scattering properties of ice crystals. However, large discrepancies between theoretical calculations and observations of the radiative properties of ice clouds have been reported. Electron microscopy images of ice crystals grown in laboratories and captured by balloons show varying degrees of complex morphologies in sub-micron (e.g., surface roughness) and super-micron (e.g., inhomogeneous internal and external structures) scales that may cause these discrepancies. In this study, the current idealized models representing morphologies of ice crystals and the corresponding numerical methods (e.g., geometric optics, discrete dipole approximation, T-matrix, etc.) to calculate the single-scattering properties of ice crystals are reviewed. Current problems and difficulties in the calculations of the single-scattering properties of atmospheric ice crystals are addressed in terms of cloud microphysics. Future directions to develop physically consistent ice-crystal models are also discussed.

• Publications of The Korean Astronomical Society
• /
• v.30 no.3
• /
• pp.821-832
• /
• 2015

As a part of the short-period variability survey (SPVS) at Bohyunsan Optical Astronomy Observatory, we obtained time-series BV CCD images in the region of the open cluster NGC 1039 (M34). The observations were performed for 22 nights from July 29, 2008 to September 26, 2010. We also made LOAO observations for 10 days from September 18, 2009 to October 30, 2010 to confirm the small variabilties of ${\delta}$ Scuti-type variable stars. In this paper we presented the observational properties of 28 variable stars found in the region. They are seven ${\delta}$ Scuti-type variable stars, two ${\gamma}$ Doradus-type variable stars, four-teen eclipsing binary stars and five semi-long periodic or slow irregular variables, respectively. Only three variables were listed in the GCVS and the rest are newly discovered ones. We have performed multiple-frequency analysis to determine pulsation frequencies of the ${\delta}$ Scuti-type and ${\gamma}$ Doradus-type variable stars, using the discrete Fourier transform and linear least-square fitting methods. We also have derived the periods and amplitudes of 12 eclipsing binaries from the phase fitting method, and presented the light curves of all variable stars.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.23-36
• /
• 2004

A computationally efficient and accurate Monte Carlo (MC) simulator of electron beam lithography process has been developed for sub-0.l${\mu}{\textrm}{m}$ T-shaped gate formation in the HEMT devices for millimeter-wave frequencies. For the exposure process by electron to we newly and efficiently modeled the inner-shell electron scattering and its discrete energy loss with an incident electron for multi-layer resists and heterogeneous multi-layer targets in the MC simulation. In order to form the T-gate shape in resist layers, we usually use the different developer for each resist layer to obtain good reproducibility in the fabrication of HEMT devices. To model accurately the real fabrication process of electron beam lithography, we have applied the different developers in trilayer resist system By using this model we have simulated and analyzed 0.l${\mu}{\textrm}{m}$ T-gate fabrication process in the HEMT devices, and showed our simulation results with the SEM observations of the T-shaped gate process.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.83-92
• /
• 2002

Freight mode choice models are essential to the analysis of many areas of transport research. However, observations of actual market choices have only been made in a limited number of situations. Therefore, stated preference(SP) techniques have emerged as an alternative source of actual market choices to be used for estimating freight mode choice models. Considerable confidence exists about SP data, but little consideration has been given to the potential for estimation bias. This paper has been motivated by the theoretical side of estimating SP discrete choice models, focusing on a case study of freight mode choice. Recently developed simulation methods are used to construct inherent random heterogeneity legit models, which consider individual heterogeneity, its inheritance to the next choices and overcome the independence from irrelevant alternatives (IIA) property. This Paper contributes to the development of models dealing with heterogeneity and its inheritance, and sheds light on the heterogeneity of freight transport.

• Tunnel and Underground Space
• /
• v.8 no.3
• /
• pp.234-248
• /
• 1998

This paper presents a new constitutive model for numerical modeling the shear behaviour of rough rock joints. The model incorporates the dilatancy of joints on the basis of elasto-plastic theory. Barton's empirical shear strength formular are adopted in the formulation process. The mobilized JRC concept is evoked to address the shear strength hardening and sofrening phenomena. The mobilized JRC in the pre- and post-peak range is approximated by assuming that the variation of JRC is a function of tangential plastic work. Discrete finite joint element is used to implement the proposed constitutive model. The model is validated by the numerical direct shear test on a single joint which is subjected to different boundary conditions. The test results are in good agreement with the experimental observations reported by other authors. The numerical tests also exhibit that the proposed model can simulate the salient features envisaged in the behaviour of rough rock joints.

• Journal of KIISE:Software and Applications
• /
• v.31 no.3
• /
• pp.379-386
• /
• 2004

Video segmentation is a fundamental task in video indexing and it includes two kinds of shot change detections such as the abrupt transition and the gradual transition. The abrupt shot boundaries are detected by computing the image-based distance between adjacent frames and comparing this distance with a pre-determined threshold value. However, the gradual shot boundaries are difficult to detect with this approach. To overcome this difficulty, we propose the method that detects gradual transition in the MPEG compressed video using the HMM (Hidden Markov Model). We take two different HMMs such as a discrete HMM and a continuous HMM with a Gaussian mixture model. As image features for HMM's observations, we use two distinct features such as the difference of histogram of DC images between two adjacent frames and the difference of each individual macroblock's deviations at the corresponding macroblock's between two adjacent frames, where deviation means an arithmetic difference of each macroblock's DC value from the mean of DC values in the given frame. Furthermore, we obtain the DC sequences of P and B frame by the first order approximation for a fast and effective computation. Experiment results show that we obtain the best detection and classification performance of gradual transitions when a continuous HMM with one Gaussian model is taken and two image features are used together.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.147-159
• /
• 2002

Weathered bentonites occcur as surficial alterations of some domestic bentonite deposits in the Tertiary formations, with the thickness of less than about 50 cm, along naturally-formed weathering surface with slopping in gentle. 7 $\AA$-halloysite was found together with montmorillonite in the weathered bentonite. Compared to normal bentonite, the weathered one is generally more clay-rich and contains little amounts of original rock-forming minerals and residues. In the electron microscopy, fine-scale occurrence of the clay minerals tends to be somewhat discrete and segregated rather than closely associated. h curled margin of montmorillonite lamella is deformed to become obtuse in the weathered bentonite. Halloysite occurs as acicular to tubular crystals with the length of less than 2 $\mu$m and the width of about 0.3 $\mu$m, which commonly forms bundle-shaped aggregates. Electron microscopic observations on the fine-scale occurrence and texture of the wtathered bentonites indicate that the clay mineral transition from montmorillonite to halloysite has undergone without accompanying any intermediate phases of both clay minerals such as a mixed-layered type (M/H). The alteration reaction between these two clay minerals probably took place in the form of dissolution and precipitation mechanism in oxidation condition. An intense chemical leaching of SiO$_2$, Na, K and Ca might occur during the alteration reaction, forming a lot of dissolution cavity and residual concentration of A1$_2$O$_3$ and Fe, relatively. As the result of the chemical change, a fsvorable condition for halloysite formation seemed to be provided.

• Applied Microscopy
• /
• v.39 no.1
• /
• pp.65-72
• /
• 2009

Cryo-SEM which enables specimens to be observed in frozen form has been used to study liquid specimens in their native states. Cryo-methods, sample preparation for cryo-SEM, are quite complex and involve several discrete but vitally interconnected steps which are rapid cooling, fracturing, sectioning, etching and coating. It is important to select practical techniques and to optimize conditions of each steps considering analytic purpose and specimen characters, viz., sample dimension, water contents. In this study, etching methods and sample preparation before freezing had been studied for observation of cyanobacteria, Synechocystis sp. PCC 6803 using cryo-SEM and their cryo-SEM images were compared to Conventional SEM (CSEM) images treated by chemical fixation. We could observe the improved morphological images of the pili of the surface and membranes of Synechocystis sp. PCC 6803 and the three-dimensional architectures of their biofilm, which were difficult to observe using chemical fixation and CSEM. These results suggest that cryo-methods/cryo-SEM are useful techniques for morphological study of biological specimen.

• Publications of The Korean Astronomical Society
• /
• v.27 no.5
• /
• pp.399-409
• /
• 2012

As a part of the short-period variability survey (SPVS) at Bohyunsan Optical Astronomy Observatory, we obtained time-series BV CCD images in the region of Cyg OB3 association centered on the open cluster NGC 6871. The observations were performed for 18 nights from September 5, 2008 to September 1, 2009. We found 15 short-period variable stars in the region. They are ${\delta}$ Scuti type stars belonging to the local spiral arm, Orion spur. Among them, only two stars were previously known, and the rest are newly discovered ones. In this paper, we have performed a multiple-frequency analysis to determine frequencies of the 15 ${\delta}$ Scuti type stars, using the discrete Fourier transform and linear least-square fitting methods. One of the newly discovered variable stars is a double-mode ${\delta}$ Scuti type star with the fundamental and the first overtone modes, and two are high amplitude ${\delta}$ Scuti stars.