• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.28-38
• /
• 2005

According to the recent development of measurement system utilizing one or a set of boreholes, visualization of the explored underground became to be a major issue. It induced even the introduction of monitoring apparatuses on the borehole wall with multi-function tool, but the usage of these was often limited by where is unfavorable rock condition and a few of engineers can approach. And so, a portable type of borehole camera with only the essential function has been investigated and a few of commercial models about this is recently being applied into the field condition. This paper was based on the monitoring results obtained using a commercial model by Dr. Nakagawa. Discontinuities in rock mass were the topic for the visualization, and it was studied how can visualize their three dimensional distribution and what a numerical formulation is needed and how to understand the visualization result. The numerical formulation was based on the geometric correlation between the dip direction / dip of discontinuous plane and the trend / plunge of borehole, a set of the equation of a plane was induced. As field application of this into two places, it is found that the above visualization methodology will be especially an useful geotechlical tool for analyzing the local distribution of discontinuities.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.4
• /
• pp.397-403
• /
• 2012

Fe-REE deposits occurred in Jaeunri, Hongcheon formed by carbonatitic melts consist of 3 parts such as northern, middle and southern ore bodies showing discontinuous distribution, and extension shape of ore bodies can be figured through field survey and geometric analysis. Foliations in gneiss around northern and middle ore bodies represent NNE, whereas toward south its direction changes gradually from NE to ENE and finally N-S direction appears in southern ore body. From Jaeungyo to Saemaeulgyo geometric analysis from field work gives that fold shape in this area is open synclinal fold concavely and gently to NW with $45^{\circ}$ northwestward plunging axis, in contrast small scale anticline with $45^{\circ}$ northwestward plunging axis in Yagsooteo area near western part of Saemaeulgyo. Dragging effect could be occurred on these folds by WNW trending dextral strike-slip fault from Yagsooteo to Saemaeulgyo. New ore body can be confirmed from folding structure estimated by trend of foliation, and thus unidentified ore body may be exist under alluvial surface from middle to southern ore body and its distribution could show reversed "ㄱ", one of Korean consonants, considering with estimated strike and dip of foliations. This estimated extension of ore body figured out by structural analysis in the studied area works an important role for measuring of ore reserve and selecting of drilling site to find new ore body.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.125-132
• /
• 2006

Recently, surface finishing and protection materials were developed to restore performance of the deteriorated concrete and inhibiting corrosion of the reinforcing-bar. For this purpose, surface protection agent as well as coatings are used. Coatings have the advantage of low Permeability of $CO_2,\;SO_2$ and water. However, for coatings such as epoxy, urethane and acryl, long-term adhesive strength is reduced and the formed membrane of those is blistered by various causes. Also when organic coatings are applied to the wet surface of concrete, those have a problem with adhesion. On the other hand, surface protection agent penetrates into pore structure in concrete through capillary and cm make a dense micro structure in concrete as a result of filling effect. Furthermore, the chemical reaction between silicate from surface protection agent and cement hydrates can also make a additional hydration product which is ideally compatible with concrete body. The aim of this study is to examine the effect of penetrative surface protection agent(SPA) by evaluating several concrete durability characteristics. The results show that the concrete penetrated surface protection agent exhibited higher durability characteristics for instance, carbonation velocity coefficient, resistance to chemical attack and chloride ion penetration than the plain concrete. These results due to formation of a discontinuous macro-pore system which inhibits deterioration factors of concrete by changed the pore structure(porosity and pore size distributions) of the concrete penetrated surface protection agent.

• Korean Journal of Environment and Ecology
• /
• v.22 no.4
• /
• pp.453-460
• /
• 2008

This study conducted an analysis of plant species composition and vegetation at sea cliffs of the uninhabited islets off Ganghwa-gun by applying discontinuous classification method & continuous ordination method of species composition table by correlation. The analysis results are as follows: First, the plant showing the highest appearance frequency was Parthenocissus tricuspidata Planch.(58.3%), followed by Carpinus coreana Nak., Viburnum carlesii Hemsl. and Kalopanax septemlobus Koidz.(37.5%,respectively). As for a plant community, it was found that it consisted of Quercus mongolica community, Tilia mandshurica community, Carpinus coreana community, Sorbus alnifolia community and Pinus thunbergii community; as for the community distribution classified by individual islet, it was revealed that Quercus mongolica community appeared at Sosongdo and Bunjido; Tilia mandshurica community at Sosongdo and Daesongdo; Carpinus coreana community appeared at Woodo, Suribong and Bido; Sorbus alnifolia community at Susido, Sosongdo and Daesongdo, and Pinus thunbergii community at Seokdo and Woodo, respectively. The plant similarity classified by uninhabited islet was found to be the highest at Sosongdo and Daesongdo. This research judged the reason why the typical grassland community of coastal cliffs did not join these islets to be environmental conditions of rock landform where there exists almost no surface soil at most sea cliffs; thus, more detailed study on this was required.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.3
• /
• pp.181-187
• /
• 2013

Genetic variation in Asaum misandrum, a woodland herb in Korea, was investigated based on allozyme analysis with starch gel electrophoresis. All of previously reported populations in Korea were sampled and seven loci from six enzymes were analyzed. Overall genetic variation of A. misandrum population showed considerably high levels of genetic variation within the species (A = 2.05, P = 71.4, $H_E$ = 0.294). A positive $F_{IS}$ value of A. misandrum indicated overall deficiency of heterozygotes, and a low $F_{ST}$ value (0.112) meant very little differentiation among populations. Factors contributing to the high levels of genetic diversity found within populations of A. misandrum include population maintenance via wide distribution range from Korea to Japan and primarily outcrossing breeding system. Although it showed moderate genetic diversity level, most habitats of the species were scattered and discontinuous. Besides, low numbers of individuals were found in the most habitats and individuals are collected frequently from the wild due to the unique shape of the flowers as well as the rarity of the species. Thus, there is a need to set up a reasonable conservation strategies including the maintenance mechanism of genetic diversity of A. misandrum.

• Economic and Environmental Geology
• /
• v.20 no.2
• /
• pp.85-95
• /
• 1987

The host rocks of titaniferous magnetite deposits in Gonamsan are alkaline gabbros, which are typical of undersaturated alkaline rocks in terms of the lack of normative quartz. According to field occurrences and petrographic features, these alkaline gabbros are divided into 3 rock types: coarse-grained and pegmatitic rock, medium-grained rock with equigranular texture, and layered cumulate rock. All these rocks mainly contain clinopyroxene(salite), plagioclase(An 43-66), pargasite, and ilmenite. The accessory minerals are apatite, sphene, quartz, and sometimes titaniferous magnetite. Pargasite, sphene, and quartz are considered to be secondary minerals formed by the reaction among clinopyroxene, plagioclase and Fe-Ti oxide at deuteric stage. Fe-Ti oxides generally occur as ilmenite in the alkaline rocks, and titaniferous magnetite in the ore deposits. Layered cumulate rocks are characterized by a recurrence of discontinuous thin mesolayer of clinopyroxene-pargasite within leucolayer mainly composed of plagioclase. Clinopyroxene is cumulus mineral whereas plagioclase, ilmenite and apatite occur as intercumulus minerals. According to the variation diagrams of oxide and trace element contents against the differentiation index, incompatible elements, such as Na, Ba and Sr, show positive correlations whereas compatible elements, such as Mg and Cr, show negative correlations. However some compatible elements, such as Co, Ni and V show irregular variations, reflecting relative cumulate status of cumulus and intercumulus minerals. On the de la Roche multicationic diagram, these alkaline gabbros are distributed along the differentiation curve of undersaturated alkaline series from alkaline basaltic composition through basanitic composition to tephritic composition. Layered cumulate rocks, which are distributed between basanitic composition and tephritic composition, reflect their cumulate character, slightly scattering away from the curve. The medium-grained rock shows higher contents in Ba, Sr and light rare earch elements than the coarse-grained and pegmatitic rock. The former shows two times higher contents of total rare earth elements than the latter, $while(La/Lu)_{cn}$ ratios maintain fairly constant values of 5.08~5.06 in these two rocks. This means that coarse-grained and pegmatitic rock, as compared with the medium-grained rock, was formed by the earlier differentiated magma but rare-earth element distribution pattern remained almost parallel during differentiation. From the data the above mentioned, these alkaline gabbros are considered to be comagmatic and to be formed by intrusions of differentiated magmas in its reservoir.

• Journal of Radiation Protection and Research
• /
• v.40 no.1
• /
• pp.55-64
• /
• 2015

Dose calculations which are a crucial requirement for radiotherapy treatment planning systems require accuracy and rapid calculations. The conventional radiotherapy treatment planning dose algorithms are rapid but lack precision. Monte Carlo methods are time consuming but the most accurate. The new combined system that Monte Carlo methods calculate part of interesting domain and the rest is calculated by neural can calculate the dose distribution rapidly and accurately. The preliminary study showed that neural networks can map functions which contain discontinuous points and inflection points which the dose distributions in inhomogeneous media also have. Performance results between scaled conjugated gradient algorithm and Levenberg-Marquardt algorithm which are used for training the neural network with a different number of neurons were compared. Finally, the dose distributions of homogeneous phantom calculated by a commercialized treatment planning system were used as training data of the neural network. In the case of homogeneous phantom;the mean squared error of percent depth dose was 0.00214. Further works are programmed to develop the neural network model for 3-dimensinal dose calculations in homogeneous phantoms and inhomogeneous phantoms.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1383-1398
• /
• 2018

Sea surface wind is one of the most fundamental variables for understanding diverse marine phenomena. Although scatterometers have produced global wind field data since the early 1990's, the data has been used limitedly in oceanic applications due to it slow spatial resolution, especially at coastal regions. Synthetic Aperture Radar (SAR) is capable to produce high resolution wind field data. KOMPSAT-5 is the first Korean satellite equipped with X-band SAR instrument and is able to retrieve the sea surface wind. This study presents the validation results of sea surface wind derived from the KOMPSAT-5 backscattering coefficient data for the first time. We collected 18 KOMPSAT-5 ES mode data to produce a matchup database collocated with buoy stations. In order to calculate the accurate wind speed, we preprocessed the SAR data, including land masking, speckle noise reduction, and ship detection, and converted the in-situ wind to 10-m neutral wind as reference wind data using Liu-Katsaros-Businger (LKB) model. The sea surface winds based on XMOD2 show root-mean-square errors of about $2.41-2.74m\;s^{-1}$ depending on backscattering coefficient conversion equations. In-depth analyses on the wind speed errors derived from KOMPSAT-5 backscattering coefficient data reveal the existence of diverse potential error factors such as image quality related to range ambiguity, discrete and discontinuous distribution of incidence angle, change in marine atmospheric environment, impacts on atmospheric gravity waves, ocean wave spectrum, and internal wave.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.513-523
• /
• 2012

The upper sedimentary layer of the Ulleung Basin in the East Sea shows stacked mass-flow deposits such as slide/slump deposits in the upper slope, debris-flow deposits in the middle and lower slope, and turbidites in the basin plain. Shallow gases or gas hydrates are also reported in many area of the Ulleung Basin, which are very important in terms of marine resources, environmental changes, and geohazard. This paper aims at studying acoustic characteristics and distribution pattern of gas-related structures such as acoustic column, enhanced reflector, dome structure, pockmark, and gas seepage in the upper sedimentary layer, by analysing high-resolution chirp profiles. Acoustic column shows a transparent pillar shape in the sedimentary layer and mainly occurs in the basin plain. Enhanced reflector is characterized by an increased amplitude and laterally extended to several tens up kilometers. Dome structure is characterized by an upward convex feature at the seabed, and mainly occurs in the lower slope. The pockmark shows a small crater-like feature and usually occurs in the middle and lower slope. Gas seepage is commonly found in the middle slope of the southern Ulleung Basin. These gas-related structures seem to be mainly caused by gas migration and escape in the sedimentary layer. The distribution pattern of the gas-related structures indicates that formation of these structures in the Ulleung Basin is controlled not only by sedimentary facies in upper sedimentary layer but also by gas-solubility changes depending on water depth. Especially, it is interpreted that the chaotic and discontinuous sedimentary structures of debris-flow deposits cause the facilitation of gas migration, whereas the continuous sedimentary layers of turbidites restrict the vertical migration of gases.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.3
• /
• pp.155-166
• /
• 2007

We carried out a study on the marine environment, such as water temperature, salinity, density and chlorophyll ${\alpha}$, and the distribution of phytoplankton community, such as species composition, dominant species and standing crops in the Southwestern Sea of Korea during early summer 2005. According to the analysis of a T-S diagram, three characteristics of water masses were identified. We classified them into Korean and Chinese coastal water, the cold water and the oceanic water. The first was characterized by high temperature and low salinity in the surface layer influenced by river run offs from China and Korea, the second by low temperature and salinity in bottom layer originated from the bottom cold water of the Yellow Sea, and the third by high temperature and high salinity influenced by Tsushima warm currents. The internal discontinuous layer among them was formed at the intermediate depth (about $10{\sim}20\;m$ layer). And the thermal front appeared in the central parts between Tsushima warm currents and Korean and Chinese coastal waters in the Southwestern Sea of Korea. Chlorophyll ${\alpha}$ concentration was high values in the Korean coastal waters and sub-surface layers. But It was low concentration in the Tsushima warm currents regions. The $Chl-{\alpha}$ maximum layers appeared in the sub-surface layer below thermocline. The phytoplankton community in the surface and stratified layers was composed of a total of 40 species belonging to 26 genera. Dominant species were 2 diatoms, Paralia sulcata, Skeletonema costatum and a dinoflagellate, Scripsiella trochoidea. Standing crops of phytoplankton in the surface layer were very low with cell density ranging from 5 to $3.8\;{\times}\;10^3\;cells/L$. Diatoms were controlled by the expanded low salinity coastal waters of the low salinity with high concentrations of nutrients. Otherwise phytoflagellates were dominant in the high temperature regions where the Tsushima warm currents approches the Southwestern Sea of Korea in early summer.