• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.179-186
• /
• 2008

In proportion as the growth of the wireless sensor network applications, we need for more accuracy wireless channel information. In the case of indoor or outdoor wireless sensor networks, multipath propagation causes severe problems in terms of fading. Therefore, a path-loss model for multipath environment is required to optimize communication systems. This paper deals with log-normal path loss modeling of the indoor 2.4 GHz channel. We measured variation of the received signal strength between the sender and receiver of which separation was increased from 1 to 30m. The path-loss exponent and the standard deviation of wireless channel were determined by fitting of the measured data. By using the PRR(Packet Reception Rate) of this model. Wireless sensor channel is defined CR(Connect Region), DR(Disconnected Region). In order to verify the characteristics of wireless channel, we performed simulations and experiments. We demonstrated that connection ranges are 24m in indoor, and 14m in outdoor.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.301-303
• /
• 2001

현재 무선단말기 보급의 확대와 시간과 공간의 제약을 뛰어넘는 장점으로 무선 인터넷 환경이 급속도로 발전하고 있다. 그러나, 본 논문의 연구 분야인 모바일 지리정보 시스템(Mobile Geographic Information System)에서 무선인터넷을 통하여 실시간 지리 정보를 얻기 위해 사용자의 무선단말기와 서버 사이에 빈번한 데이터 송수신이 이뤄져야 하며 데이터의 빠른 변화를 수용해야 한다. 그러나, 아직 현저히 낮은 대역폭을 가진 채널을 통해 통신하며, 비싼 이용 요금과 오류로 인한 자발적 또는 비자발적 연결 끊김 현상 등은 서비스 제공에 한계를 가진다. 그러므로 본 논문에서는 이동 컴퓨팅 환경의 연구를 통해 연결 끊김 현상에서도 클라이언트의 지속적인 서비스 운영을 위한 비연결 연산으로 의미론적 캐시 기법과 캐시 교체 전략에 대해 알아보며, 본 논문에서는 Layer와 Region을 고려한 의미론적 캐싱 기법을 제안하여 무선 환경에서 동적인 지도서비스를 위한 기법을 제시하였다. 이 연구를 통해 아직 많은 한계를 지닌 무선인터넷 환경에서 지리정보뿐 아니라 위치기반의 다양한 서비스 분야에 응용될 수 있으리라 기대된다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.1-8
• /
• 2004

In this paper, we propose a method for restoring trademark and caption areas using an isophote. In our method, the image restoration problem is modeled as an optimization problem, which in our case, is solved by a cost function with isophote constraint that is minimized using a GA The technique creates an optimal connection of all pairs of isophotes disconnected by a caption in the frame. For connecting the disconnected isophotes, we estimate the value of the smoothness, given by the best chromosomes of the GA and project this value in the isophote direction. Experimental results show that the isophote operator worked better than Laplacian operator for image restoration, and the proposed method has a great possibility for automatic restoration of a region in an advertisement scene.

• Korean Journal of Cognitive Science
• /
• v.12 no.4
• /
• pp.41-47
• /
• 2001

Palmer and Rock (1994) proposed that a connected region of uniform visual properties (uniform connectedness) strongly tends to be organized as a single perceptual unit To test this hypothesis using briefly presented forms three experiments were executed. In Experiment 1 and 2 participants were asked to report the identity of a post-cued target. and there was no difference between connected and disconnected displays. In Experiment 3 participants were asked to report the predesignated name of each whole display and the accuracy rate was higher in the connected displays than in the disconnected ones. However negative repetition effects were observed consistently in all the experiments. This indicates uniform connectedness does not have a strong effect in perceiving briefly presented forms.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.575-578
• /
• 2005

Topographical images, in case of aerial or satellite images, are usually similar in colors and textures, and complex in shapes. Thus we have to use shape features of images for efficiently retrieving a query image from topographical image databases. In this paper, we propose a shape feature extraction method which is suitable for topographical images. This method, which improves the existing projection in the Cartesian coordinates, performs the projection operation in the polar coordinates. This method extracts three attributes, namely the number of region pixels, the boundary pixel length of the region from the centroid, the number of alternations between region and background, along each angular direction of the polar coordinates. It extracts the features of complex shape objects which may have holes and disconnected regions. An advantage of our method is that it is invariant to rotation/scale/translation of images. Finally we show the advantages of our method through experiments by comparing it with CSS which is one of the most successful methods in the area of shape feature extraction

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.1
• /
• pp.11-24
• /
• 2008

Region-based image retrieval techniques, which divide image into similar regions having similar characteristics and examine similarities among divided regions, were proposed to support an efficient low-dimensional color indexing scheme. However, color image segmentation techniques are required additionally. The problem of segmentation is difficult because of a large variety of color and texture. It is known to be difficult to identify image regions containing the same color-texture pattern in natural scenes. In this paper we propose an automatic color image segmentation algorithm. The colors in each image are first quantized to reduce the number of colors. The gray level of image representing the outline edge of image is constructed in terms of Fisher's multi-class linear discriminant on quantized images. The gray level of image is transformed into a binary edge image. The edge showing the outline of the binary edge image links to the nearest edge if disconnected. Finally, the final segmentation image is obtained by merging similar regions. In this paper we design and implement a region-based image retrieval system using the proposed segmentation. A variety of experiments show that the proposed segmentation scheme provides good segmentation results on a variety of images.

• Smart Media Journal
• /
• v.11 no.1
• /
• pp.46-57
• /
• 2022

In this paper, multi-region based Radial Graph Convolutional Network (MRGCN) algorithm which can perform end-to-end action recognition using the optical flow and gradient of input image is described. Because this method does not use information of skeleton that is difficult to acquire and complicated to estimate, it can be used in general CCTV environment in which only video camera is used. The novelty of MRGCN is that it expresses the optical flow and gradient of the input image as directional histograms and then converts it into six feature vectors to reduce the amount of computational load and uses a newly developed radial type network model to hierarchically propagate the deformation and shape change of the human body in spatio-temporal space. Another important feature is that the data input areas are arranged being overlapped each other, so that information is not spatially disconnected among input nodes. As a result of performing MRGCN's action recognition performance evaluation experiment for 30 actions, it was possible to obtain Top-1 accuracy of 84.78%, which is superior to the existing GCN-based action recognition method using skeleton data as an input.

• Journal of Korea Multimedia Society
• /
• v.14 no.12
• /
• pp.1613-1620
• /
• 2011

Roof structure of the traditional buildings in the Northeast Asia region including Korea contains the most complicated and crucial components of the building and therefore the issues such as cost down, productivity and the attempt to combine the traditional building methodology with contemporary building technology turn out to be vital to the survival of the old yet disconnected traditional building industry. One of the distinctive modern building technologies is handling life-cycle building information by constructing virtual buildings using BIM, building information modeling tools. In this paper we follow a procedure to implement some of the design modules to be applied in BIM tools which are platforms for constructing virtual building models. We focus on Gong-po components namely the bracket-sets which are the essential part that connects the middle parts to the top parts (the roof structure) which are considered to be the most elaborate parts of the traditional buildings. The target building to work with in this paper is the Sung-Rye-Moon which has special cultural and social meanings nowadays and we tested our understanding and the design modules such as the bracket-sets by constructing a virtual building model of Sung-Rye-Moon.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.72-82
• /
• 2014

The Contemporary paradigm to understand the complexity and diversity is moving to 'Becoming' that taken place in reviewing at the relation of various concepts. In Japan, After the collapse of modern architecture has been declared 'Metabolism' was appeared. They tried to apply organism's metabolic system to buildings based on ecological thoughts. But Metaboilsm's projects had revealed limitations of representation that the city on the mechanical system became a huge scale. As a result, It caused a break the cultural context of the region in Japan. After then, Japanese Architects expressed a pluralistic aspects of modern society for the restoration of disconnected cultural context. From this perspective, The thought of 'becoming' is a new role for Contemporary Japanese Architect. This research is focused of projects of SANAA, Ito Toyo, Sou Fujimoto, because they have spatial thought about realizing the space through the ways organizing the various potential possibilities in the simple external form not stimulated. They are realize the 'becoming-space' within the architecture. This 'becoming-space' gives people in building the new characteristics and experience that potential interactions among user, architecture and nature. It is non-representational space not fixed, but changing organically and variably.

• The Journal of the Korea Contents Association
• /
• v.7 no.2
• /
• pp.109-116
• /
• 2007

To reduce the effect of color distortions on reading colors, it is more desirable to statistically process as many pixels in the individual color region as possible. This process may require segmentation, which usually requires edge detection. However, edges in color codes can be disconnected due to various distortions such as dark current, color cross, zipper effect, shade and reflection, to name a few. Edge linking is also a difficult process. In this paper, k-means clustering was performed on the images where edge detectors failed segmentation. Experiments were conducted on 311 images taken in different environments with different cameras. The primary and secondary colors were randomly selected for each color code region. While segmentation rate by edge detectors was 89.4%, the proposed method increased it to 99.4%. Color recognition was performed based on hue, a*, and b* components, with the accuracy of 100% for the successfully segmented cases.