• 한국분무공학회지
• /
• 제22권3호
• /
• pp.146-152
• /
• 2017

An experimental study was carried out to investigate the spray characteristics of non-circular effervescent twin-fluid nozzles. For this purpose, two types of non-circular nozzles (E1, E2) and circular nozzle (C) were used. Three types of aerorators with hole diameters of 1.2, 1.7 and 2.1 mm were used. Each aerorator has a total of 12 holes. It is defined by area ratio which is ratio of exit orifice area and aerator hole area. Experiments were carried out by controlling the amount of air flowing after fixing the flow rate of the liquid, and the nozzle internal pressure and SMD were measured, and the jet image was taken from the nozzles. The discharge coefficients of the three kinds of nozzles were compared with the used in plain orifice's equation and the Jedelsky's equation, and the Jedelsky's equation was found to be about 3 times larger. In addition, empirical formula based on ALR, which is the largest variable in Jedelsky's equation, was derived. The droplet sizes(SMD) were found to be smaller in the non-circular shape than in the circular shape, which is concluded to be caused by the difference of the discharge coefficients.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권4호
• /
• pp.178-182
• /
• 2006

Five model coils of 6.6 kV motor were manufactured with several defects. These stator coils have artificial defects such as void of groundwall insulation, removal of semi-conductive coating and damage of strand insulation. Epoxy-mica coupler(80 pF) was connected to five model coil terminals. The voltage applied to the coils was 3.81 kV, 4.76 kV, 6.0 kV and 6.6 kV, respectively. Partial discharge(PD) tests performed in the laboratory and shield room. Digital PD detector(PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in pC were measured with PDD. PD patterns of model coils were indicated the internal and slot discharges. PD patterns are consistent with the result of measurement using PDD and TGA instruments. AC breakdown test was performed on five model coils in order to confirm the result of PD measurements. All the failures were located in a line-end coil at the exit from the core slot.

• 한국분무공학회지
• /
• 제12권1호
• /
• pp.58-64
• /
• 2007

The spray characteristics of the oxidizer-rich preburner are investigated. This system is generally operated at an oxidizerfuel mixture ratio of 50. The spray quality and mixing performance are very important for safe combustion. To know the spray characteristics of the oxidizer-rich preburner, we have designed various swirl injectors and measured droplet velocity and size by the PDPA system. The flow discharge coefficient of the fuel orifice is $0.12{\sim}0.21$, oxidizer orifice discharge coefficient is $0.16{\sim}0.28$. From the spray visualization, fuel nozzle spray angle is $15^{\circ}{\sim}25^{\circ}$, oxidizer nozzle spray angle is $65^{\circ}{\sim}85^{\circ}$ and combined spray angle is reduced $2^{\circ}{\sim}5^{\circ}$ compared to the oxidizer nozzle only case. From the PDPA measurement, droplet SMD is $175\;{\mu}m$ at 50 mm and $190\;{\mu}m$ at 100 mm of variant 1 combined case. The number concentration measurement revealed the reason of the droplet diameter increasement with distance. That is due to drop coalescence results from collision of drops which is occurred in dense sprays at a long distance from nozzle orifice exit.

• 대한한의학원전학회지
• /
• 제33권1호
• /
• pp.149-158
• /
• 2020

Objectives : This study aims to examine the exterior relief method through pungent-cool properties in comparison to pungent-warm properties historically, to understand the meaning of 'exterior relief through pungent-cool' more thoroughly. Methods : Contents mentioning the treatment method directly were examined historically, then analyzed. Results & Conclusions : The method to relieve the exterior through pungent-cool properties has developed by overcoming the limitations of the method to relieve the exterior through pungent-warm properties since it was first established in 『Shanghanzabinglun』(『傷寒雜病論』). The term 'relief of the exterior through pungent-coolness'(辛凉解表) was first mentioned in the Ming period, referring to weak level of perspiration. Yetianshi(葉天士) explained it as communicating Weiqi(衛氣) using pungent-cool medicinals for heat to discharge through the exterior, resulting in mild sweating. In 『Wenbingtiaobian』(『溫病條辨』) the term 'to relieve the flesh'(解肌) refers to both mild sweating through pungent-warm medicinals and the opening of the exterior through pungent-cool medicinals for pathogenic qi to exit, resulting in sweating. If the exterior relief of the pungent-warm medicinals happens through the warm Yang qi(陽氣) stimulated the inner Yin fluids(陰液) to discharge as sweat, that through pungent-cool medicinals relieves stagnation in the exterior, opening up a way for the pathogenic heat to exit. From the perspective of the main therapeutic mechanism for pungent-cool medicinals to be its coolness relieving heat, the term 'exterior relief through pungent-coolness' becomes erroneous. For the 'exterior relief through pungent-coolness' category to be valid, the meaning of 'exterior relief' needs to be expanded to include not only stimulated sweating but the treatment process that could result in sweating.

• 한국추진공학회지
• /
• 제14권5호
• /
• pp.1-7
• /
• 2010

최근 이중목 노즐(Dual Throat Nozzle, DTN)을 사용하여 추진체의 추력을 제어하는 방 이 많은 주목을 받고 있다. 이중목 노즐은 공동을 사이에 두고 두 개의 노즐 목을 가지도록 설계된다. 본 연구에서는 DTN의 기초 유동특성을 조사하기 위하여, 수치해석적인 방법을 적용하였으며, 노즐압력비와 노즐목 면적비를 변화시켰다. 수치해석에서는 축대칭, 압축성 Navier-Stokes방정식을 풀기 위하여, 유한체적법을 적용하였다. 그 결과 본 수치해석은 실험결과를 잘 예측하였으며, DTN의 성능을 추력계수와 유출계수의 항으로 상세하게 설명하였다.

• Journal of Chest Surgery
• /
• 제26권6호
• /
• pp.483-487
• /
• 1993

From July 1990 to August 1992,78 Hickman catheters and 22 chemoports were inserted in 98 patients for chemotherapy.We analyzed the clinical data of these patients. The results were as follows: 1]Mean age of patients was 42.8$\pm$1.6[SE] years 2]Male to female ratio was 1.09:1 3]The diseases of the cases were leukemia[66] ,lymphoma[8], stomach cancer[8],uterine cervix cancer[5],ovarian cancer[4],lung cancer[3],aplastic anemia[2],maxillary gland cancer[1],pancreas cancer[1],malignant mesothelioma[1] and multiple myeloma[1] 4]Mean values of preoperative WBC counts,platelet counts,PT and APTT were 31,500$\pm$ 8,132[SE]/mm,104,000$\pm$ 12,200 [SE]/mm,82$\pm$ 1.9[SE]% and 32$\pm$ 0.8[SE] sec,respectively. 5]The average duration of catheter uses was 121.7$\pm$ 17.3[SE]days. 6]The complications were subcutaneous tunnel bleeding or hematoma[2],exit site or subcutaneous tunnel infection[2] and catheter related septicemia[1]. 7]The causes of catheter removal were patient`s death or hopeless discharge[22],completion of treatment[6],subcutaneus hematoma or bleeding[2],exit site or subcutaneous tunnel infection[2] and catheter related septicemia[1].So,we concluded that Hickman catheter and chemoport were useful vascular access for chemotherapy in patients with malignant diseases, with low rate of complication and longterm duration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2170-2172
• /
• 1999

A low energy large aperture(LELA) pulsed electron beam generator of a cold cathode type has been developed for environmental applications, for example, waste water cleaning, flue gas cleaning, and pasteurization etc. The operational principle is based on the emission of secondary electrons from cold cathode when ions in the plasma hit the cathode, which are accelerated toward exit window by the gradient of an electric potential. We have fabricated the LELA electron beam generator with the peak energy of 200keV and beam diameter of 200mm and obtained the large aperture electron beam in air. The electron beam current density has been investigated as a function of glow discharge current, accelerating voltage and radial distribution in front of the exit window foil. The plasma density and electron temperature have been measured in order to confirm the relation with the electron beam current density. We are going to upgrade the LELA electron beam generator in the electron energy, electron beam current and stability of operation for various applications.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.150-155
• /
• 2002

A commercial CFD code is applied to analyze the 3-D viscous flow field within vertical multi-stage centrifugal pump including impeller with 6 blades and guide vane with 11 blades and is performed by changing flow rate from 10 to $26m^3/h$ at the constant 3500rpm. The purpose of this 3-D numerical simulation is not only to confirm how much the effect of three kinds of blade inlet breadth (11mm, 11.5mm, 12mm) of impeller has influence on the performance of vertical multi-stage pump but also to make clear the cause about performance difference at the exit side of impeller and guide vane. The vertical multi-stage pump consisit of the impeller, guide, vane and cylinder. The grid of numerical analysis used to the vertical multi-stage pump is 18,000, 45,000, and 100000 cells in case of the impeller, guide vane, cylinder and total grid is 730,000 cells. The characteristics such as total pressure coefficient, total head, shaft horse power, power efficiency at the exit side of impeller and guide vane, discharge coefficient are represented according to flow rage changing.

• 한국항공우주학회지
• /
• 제31권5호
• /
• pp.80-86
• /
• 2003

캐비테이션이 존재하는 충돌형 분사기의 유출 특성에 관하여 수치해석과 실험을 수행하였다. 캐비테이션을 고려한 유동 해석 결과 실험결과와 비교하여 1% 유출계수 차이가 관찰된 반면, 단상유동 해석 결과는 8%의 차이를 보였다. 캐비테이션 유동에서 유출계수는 레이놀즈 수가 증가함에 따라 감소하였다. 반면에 단상유동에서는 레이놀즈 수에 비례하여 약간 증가하였으며 이는 점성의 효과가 상대적으로 작아진 것으로 풀이된다. 이러한 결과는 캐비테이션이 발생하는 유동에서 분사기의 유출계수를 정확하게 예측하기 위해서는 캐비테이션을 고려해야 한다는 것을 말하는 것이다. 캐비테이션 발생에 의하여 분사기 출구에서 밀도와 유속분포의 불균일이 심해졌고 이차유동의 강도가 강화되었다.

• 한국연소학회지
• /
• 제8권1호
• /
• pp.9-16
• /
• 2003

Carbon soot emission from combustion processes, especially from diesel engines, is a subject of growing concern since soot is known to seriously affect human health. Efforts have been made to oxidize soot particles utilizing Non-Thermal Plasma(NTP) techniques. When oxygen is carried into a plasma device, electrons generated by the plasma dissociate the oxygen, resulting in the formation of oxygen atoms. These highly activated atoms, called O radicals, are known as strong oxidizing agent. This paper presents concentration variations of CO and $CO_2$ at the exit of the plasma device, resulting from the soot oxidation by O radicals, with variations of inlet oxygen concentration, gas temperature, and gas flow rate. Based on the data, Arrehenious rate constants of reactions between C(s)+O and C(s)+O+O were proposed.