• Journal of Aerospace System Engineering
• /
• v.6 no.2
• /
• pp.13-17
• /
• 2012

In this study the flow rate-to-pressure difference characteristics of short-tube type damping orifices for a aircraft door damper were investigated by CFD analyses. For the verification of the CFD analysis results the actual performance of a door damper was measured and compared with them. and The dynamic response of door damper is Simulated using ADAMS. it's performance is evaluated comparing to the experiment result of door damper.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.7
• /
• pp.289-296
• /
• 1985

The Townsend primary ionization coefficient a was measured by the luminous-flux method using the fact that the intensity of radiant light is proportional to electron density in the townsend discharge domain. The ranges of measurements were 15for He gas and 10

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.43-47
• /
• 2006

In this paper, parameters of electron temperature and density for the mercury-free lighting-source were measured to diagnosis and analyze in Xe based inductively coupled plasma (ICP). As results at several dependences of 20~100mTorr Xenon pressure, the brightness of discharge tube was higher (4,900 $cd/m^2$) than other conditions when Xe pressure was 20mTorr and RF power was 200W. In that case, the electron temperature and density were 3.58eV and $3.56{\times}10^{12}cm^2$, respectively. The key parameters of Xe based ICP depended on Xe pressure more than RF power that could be verified. A high electron temperature and low electron density with a suitable Xe pressure are indispensible parameters for Xe based ICP lighting-source.

• Korean Journal of Pharmacognosy
• /
• v.42 no.3
• /
• pp.213-217
• /
• 2011

Platycodon grandiflorum (Campanulaceae) is listed in Shin-Nong-Bon-Cho-Kyung (神農本草經) as the remedy for ventilation the lung, resolving phlegm, promoting pus discharge and subduing carbuncles. The prescriptions of Gil-Gyung-Tang (桔梗湯) are also recorded in many other Chinese medicinal books. The identification of the cultivation year of P. grandiflorum is very important in commercial market as well as in research field. However, any reports about it have not been clearly established yet. To clarify the criterion, the morphological and anatomical characteristics of the roots of P. grandiflorum cultivated in Korea for various years were studied. The characteristics of the cork layer, latex tube, and vessels were shown to be useful keys to confirm the cultivation year of P. grandiflorm. As a result, it was clarified that Kilkyung from Korea was the two years root of Platycodon grandiflorm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.79-82
• /
• 2004

In general, compressors for refrigerators are major noise source in home environment. The vibration originated from a pump of a compressor can make noise through suspension springs and a LDT(Line Discharge Tube). Especially for the inverter motor driven compressor, the vibration is more serious than it of the constant speed compressors. Because the operation frequency range of an inverter motor driven compressor is very wide from 1600 rpm to 4200 rpm. In this paper, we propose the numerical model to reduce vibration by designing weight balancers and grommets. Results for analytical investigations on the exciting force and moment at the pump mass center, weight balancers and exciting frequency variation are presented.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.322-336
• /
• 2021

This paper presents a numerical prediction of the transient hydraulic loads acting on the tubes and external supports of a pressurized water reactor (PWR) steam generator (SG) during blowdown following a sudden feedwater line break (FWLB). A simplified SG model was used to easily demonstrate the prediction. The blowdown discharge flow was treated as a flashing flow to realistically simulate the transient flow fields inside the SG and the connected broken feedwater pipe. The effects of the SG initial pressure or the broken feedwater pipe length on the intensities or magnitudes of transient hydraulic loads were investigated. Then predictions of the decompression pressure wave-induced impulsive pressure differential loads on SG tubes and the transient blowdown loads on SG external supports were demonstrated and the general aspects of transient responses of such transient hydraulic loads to the FWLB were discussed.

• Journal of Veterinary Clinics
• /
• v.39 no.1
• /
• pp.32-37
• /
• 2022

A 2-month-old intact female domestic short hair presented with physical abnormalities, including discharge of watery feces from the vagina, depression, and dehydration. The rectovaginal fistula and atresia ani type 3 were diagnosed on the vaginogram. During the anoplasty, the fistula could not be identified because the patient was too small. Instead of colotomy, feces were flushed out using a feeding tube. To prevent complications, a 1-cc syringe tip was sutured at the surgical site after the anoplasty. At the 3-month telephone follow-up after surgery, the cat was reported to have no further clinical signs.

• Journal of the Korean Society of Visualization
• /
• v.21 no.2
• /
• pp.91-101
• /
• 2023

In this study, we investigated how the performance of a Venturi changes when a hemispherical bump is applied to the divergent part of the Venturi tube and what causes the performance difference. The Venturi-tunnel experiment was conducted in the Reynolds number range of 0.2 × 10⁵ - 1.2 × 10⁵ and cavitation number range of 0.9 - 10. The bump was found to reduce the pressure loss coefficient and increase the discharge coefficient by shortening the cavitation length. The decrease in the cavitation length by the bump was explained by the strengthening of the re-entrant jet. The wake generated from the hemispherical bump seems to increase the adverse pressure gradient on the Venturi surface, thereby strengthening the re-entrant jet.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.276-277
• /
• 2012

플라즈마 아킹은 PECVD, 플라즈마 식각 그리고 토카막과 같은 플라즈마를 이용하는 여러 공정과 연구 분야에서 문제가 되어왔다. 하지만, 문제의 중요성과 다르게 아킹에 대한 본질적인 연구는 아직 미비한 상태이다. 플라즈마 아킹은 집단전자방출(collective electron emission)에 의한 스파크 방전(spark discharge) 현상이다. 집단전자방출은 전계방출(field emission)이나 플라즈마와 쉬스를 두고 인접한 표면위에서의 유전분극(dielec emission)에 의해 발생한다. 우리는 CCP 플라즈마를 이용해 micro-arcing(MA)을 일으키고 랑뮈르 프로브를 이용해 MA 동안의 플로팅 포텐셜의 변화를 측정한다. MA시 PM-tube를 이용해 광량의 변화를 측정하고 플로팅 포텐셜을 fast-imaging과 동기화 시켜 MA 발생 메커니즘을 유추한다. 우리는 $30{\times}20$ cm 크기의 사각 전극을 위 아래로 가진 챔버에서 Ar 가스를 RF (13.56 MHz) 파워를 이용해 방전시켰다. 방전 전압과 전류는 파워 전극 앞단에서 High voltage probe (Tektronix P6015A)와 Current probe (TCPA300 + TCP312)를 이용해 측정했다. 플라즈마 아킹시 변하는 플라즈마 플로팅 포텐셜은 챔버 중앙에 위치한 랑뮈프 프로브에 의해 측정되고 챔버 옆의 뷰포트 앞에 위치한 PM-tube를 이용해 아킹시 변하는 광량을 측정하고 Intensified CCD를 이용해 fast-imaging을 한다. 또한 CCD 앞에 band pass filter를 부착하여 MA의 발생 메커니즘을 유추한다. RF 방전에서의 플라즈마 아킹은 아킹시 플로팅 포텐셜의 변화에 의해 크게 세부분으로 나눌 수 있다. 아킹 발생과 동시에 급격히 감소하는 감소부분(약 2 us) 그리고 감소한 포텐셜이 유지되는 유지부분(약 0~10 ms) 그리고 감소했던 포텐셜이 서서히 원래 상태로 회복되는 회복부분(약 100 us)이다. 아킹 초기시 방출된 집단 전자들은 쉬스를 단락시키게 되고 이로 인해 플로팅 포텐셜은 급격히 감소하게 된다. 이렇게 감소한 플로팅 포텐셜은 아킹 스트리머가 유지되는 한 계속 감소한 상태를 유지하게 된다. 그리고 플라즈마를 섭동했던 집단전자방출이 중단되면 플라즈마는 섭동전의 원래 상태로 회복된다. 플라즈마 아킹 발생시 생성되는 순간적으로 많은 전자들을 국소적으로 생성하게 되고 이 전자들에 의해 광량이 순간적으로 증가하게 된다. PM-tube (750.4 nm)에 의해 측정된 아킹시 광량은 정상방전 상태의 두배 가량이 된다. 그리고 이 순간적으로 증가된 광량은 시간이 지남에 따라 감소하게 되고 정상방전 일때의 광량이 된다. 광량이 증가한 후 정상방전상태의 광량에 이르는 부분은 플로팅 포텐셜이 감소한 상태에서 유지되는 부분과 일치하고 이는 플로팅 포텐셜의 유지부분동안 집단전자방출이 있다는 간접적인 증거가 된다. 그리고 정상 방전 상태 일때의 광량이 되면 집단전자방출이 중단되었다는 것이므로 그 시점부터 플로팅 포텐셜은 정산 방전상태 일때의 포텐셜로 복구되기 시작한다. 이처럼 PM-tube를 이용한 아킹 광량 측정은 아킹 스트리머를 간접적으로 측정하게 하고 집단전자방출을 이용해 아킹 시의 플로팅 포텐셜의 변화를 설명하게 해 준다.

• Journal of Chest Surgery
• /
• v.51 no.4
• /
• pp.260-265
• /
• 2018

Background: A method of wound closure using knotless suture material in the chest tube site has been introduced at our center, and is now widely used as the primary method of closing chest tube wounds in video-assisted thoracic surgery (VATS) because it provides cosmetic benefits and causes less pain. Methods: We included 109 patients who underwent VATS pulmonary resection at Samsung Medical Center from October 1 to October 31, 2016. Eighty-five patients underwent VATS pulmonary resection with chest drain wound closure utilizing knotless suture material, and 24 patients underwent VATS pulmonary resection with chest drain wound closure by the conventional method. Complications related to the chest drain wound were compared between the 2 groups. Results: There were 2 cases of pneumothorax after chest tube removal in both groups (8.3% in the conventional group, 2.3% in the knotless suture group; p=0.172) and there was 1 case of wound discharge due to wound dehiscence in the knotless suture group (0% in the conventional group, 1.2% in the knotless suture group; p=0.453). There was no reported case of chest tube dislodgement in either group. The complication rates were non-significantly different between the 2 groups. Conclusion: The results for the complication rates of this new chest drain wound closure method suggest that this method is not inferior to the conventional method. Chest drain wound closure using knotless suture material is feasible based on the short-term results of the complication rate.