• 제목/요약/키워드: Discharge Capacities

검색결과 120건 처리시간 0.02초

CTAB 조성에 따른 할로우 실리콘/탄소 음극 복합소재의 전기화학적 특성 (Electrochemical Characteristics of Hollow Silicon/Carbon Anode Composite for Various CTAB Amounts)

  • 김동민;이종대
    • Korean Chemical Engineering Research
    • /
    • 제62권1호
    • /
    • pp.99-104
    • /
    • 2024
  • 본 연구에서는 고용량 리튬이온배터리용 음극 소재로 탄소 코팅된 할로우 구조의 실리콘(HSi/C) 복합소재를 제조하였다. CTAB (N-Cetyltrimethylammonium bromide)이 첨가된 Stöber법을 통해 할로우 실리카(HSiO2)를 합성하였으며, HSiO2를 마그네슘열 환원한뒤 표면에탄소를 코팅하여 HSi/C 음극복합소재를 제조하였다. 복합소재의물리적 특성과 전기화학적 특성을 CTAB 조성에 따라 조사하였다. FE-SEM 분석 결과 CTAB 조성이 감소할수록 HSiO2 입자의 크기가 커졌으나 두께는 감소하였다. 제조된 HSi/C 소재는 다양한 CTAB 비율(0.5, 1.0, 1.5)에서 각각 2188.6, 2164.5, 1866.7 mAh/g의 높은 초기 방전용량을 나타내었으며, 100 사이클의 충·방전 후 0.5-HSi/C가 1171.3 mAh/g의 높은 가역 용량과 70.9%의 용량 유지율을 보여주었다. 전기화학 임피던스 분광법(Electrochemical Impedance Spectroscopy, EIS)으로 저항 특성을 분석하였으며, 0.5-HSi/C 소재가 20 사이클 이후 다른 CTAB 조성의 HSi/C 복합소재에 비해 안정적인 저항 특성을 보이는 것을 확인하였다.

이성분계 전도성물질을 이용한 리튬이온전지의 전기화학적 성능 향상에 관한 연구 (Improvement on Electrochemical Performances of Lithium-Ion Batteries Using Binary Conductive Agents)

  • 이창우;이미숙;김현수;문성인
    • 공업화학
    • /
    • 제16권5호
    • /
    • pp.689-692
    • /
    • 2005
  • 스피넬계 $LiMn_2O_4$를 양극 활물질로 사용하는 리튬이온전지의 전기화학적 성능을 향상시키기 위하여 서로 상이한 입자크기를 가지는 Super P Black 및 $Vulcan^{(R)}$ XC-72R을 사용한 이성분계 전도성물질을 제조하였다. 이렇게 이성분계 전도성물질을 사용하여 제조되어진 $LiMn_2O_4$ 전지 시스템은 충 방전 동안의 비용량 및 사이클 수명의 관점에서 특성 평가되었다. 결과적으로 Super P Black 및 $Vulcan^{(R)}$ XC-72R이 3:7의 비율로 구성되어진 이성분계 전도성물질을 사용하였을 때의 전지가 우수한 전기화학적 성능을 보여주었으며 이는 적절한 조합의 ionic diffusion rate와 electric contact에 의해 제어되어졌기 때문인 것으로 여겨진다.

리튬 이차전지에서 Si 음극박막의 스퍼터링 증착조건에 따르는 구조적, 전기화학적 특성 연구 (Influence of Sputtering Conditions on Structural and Electrochemical Properties of the Si Anode Film for Lithium Secondary Batteries)

  • 주승현;이성래;조병원;조원일
    • 한국재료학회지
    • /
    • 제19권2호
    • /
    • pp.73-78
    • /
    • 2009
  • This study investigated the dependence of the various sputtering conditions (Ar pressure: $2{\sim}10\;mTorr$, Power: $50{\sim}150\;W$) and thickness ($50{\sim}1200\;nm$) of Si thin film on the electrochemical properties, microstructural properties and the capacity fading of a Si thin film anode. A Si layer and a Ti buffer layer were deposited on Copper foil by RF-magnetron sputtering. At 10 mTorr, the 50 W sample showed the best capacity of 3323 mAh/g, while the 100 W sample showed the best capacity retention of 91.7%, also at 10 mTorr. The initial capacities and capacity retention in the samples apart from the 50W sample at 10 mTorr were enhanced as the Ar pressure and power increased. This was considered to be related to the change of the microstructure and the surface morphology by various sputtering conditions. In addition, thinner Si film anodes showed better cycling performance. This phenomenon is caused by the structural stress and peeling off of the Si layer by the high volume change of Si during the charge/discharge process.

유기이차전지를 위한 Poly(Styrenesulfonate)-Carbon 복합 음극의 전기화학적 특성 (Electrochemical Properties of Poly(Styrenesulfonate)-Carbon Composite Anode for Organic Rechargeable Battery)

  • 임지은;강동원;김재광
    • 전기화학회지
    • /
    • 제19권4호
    • /
    • pp.129-133
    • /
    • 2016
  • 본 연구에서는 고분자와 탄소 물질을 복합화시켜 친환경의 유기 음극을 제조하였다. Poly(styrenesulfonate)(PSS)-carbon 복합 음극은 탄소 입자를 PSS이 둘러싸고 있는 core-shell 형태를 보이며 $524mAh\;g^{-1}$의 이론용량과 0.6 V 이하의 낮은 전압을 가진다. PSS-carbon 복합 음극은 0.1, 0.5, 1, 10C에서 각각 용량 $519.6mAh\;g^{-1}$, $461.2mAh\;g^{-1}$, $411.8mAh\;g^{-1}$, $315.9mAh\;g^{-1}$의 첫 번째 방전 용량을 가지면 30사이클까지 안정적인 주기 특성을 보여준다. Polystyrene 구조와 sulfonate 기능 기를 갖는 PSS와의 탄소 복합 전극은 유기 이차전지의 전기화학적 특성을 향상 시키기 적합한 음극활 물질로 여겨 진다.

Heterocoagulation 법으로 제조된 이차전지용 MWNT/SnO2 나노복합음극재의 전기화학적 특성 (Preparation and Characteristics of MWNT/SnO2 Nanocomposites Anode by Colloidal Heterocoagulation for Li-ion Battery)

  • 한원규;홍석준;황길호;좌용호;오승탁;조진기;강성군
    • 한국재료학회지
    • /
    • 제18권9호
    • /
    • pp.457-462
    • /
    • 2008
  • Through the electrostatic interaction between the poly-diallydimethylammonium chloride (PDDA) modified Multi-walled carbon nanotube (MWNT) and $SnO_2$ suspension in 1mM $NaNo_3$ solution, MWNT-$SnO_2$ nanocomposites (MSC) for anode electrodes of a Li-ion battery were successfully fabricated by colloidal heterocoagulation method. TEM observation showed that most of the $SnO_2$ nanoparticles were uniformly deposited on the outside surface of the MWNT. Galvanostatic charge/discharge cycling tests showed that MSC anodes exhibited higher specific capacities than bare MWNT and better cyclability than unsupported nano-$SnO_2$ anodes. Also, after 20 cycles, the MSC anode fabricated by heterocoagulation method showed more stable cycle properties than the simply mixed MSC anode. These improved electrochemical properties are attributed to the MWNT, which adsorbs the mechanical stress induced from volume change and increasing electrical conductivity of the MSC anode, and suppresses the aggregation between the $SnO_2$ nanoparticles.

Study of the Electrochemical Properties of Li4Ti5O12 Doped with Ba and Sr Anodes for Lithium-Ion Secondary Batteries

  • Choi, Byung-Hyun;Lee, Dae-Jin;Ji, Mi-Jung;Kwon, Young-Jin;Park, Sung-Tae
    • 한국세라믹학회지
    • /
    • 제47권6호
    • /
    • pp.638-642
    • /
    • 2010
  • The spinel material $Li_4Ti_5O_{12}$ has attracted considerable attention as an anode electrode material for many battery applications owing to its light weight and high energy density. However, the real capacity of $Li_4Ti_5O_{12}$ powder as determined by the solid-state method is lower than the ideal capacity. In this study, we investigated the effect of the dopants in M-doped spinel $Ba_xLi_{4-2x}Ti_5O_{12}$(x=0.005, 0.05, 0.1) powders prepared by the solid-state reaction method and used as the anode material in lithiumion batteries. The results confirmed the effect of the Ba and Sr dopants on the powder properties of the spinel $Li_4Ti_5O_{12}$, which exhibited a pure spinel structure without any secondary phase in its XRD pattern. Moreover, the electrochemical properties of the spinel M-LTO materials were investigated using a half cell. The electrochemical data show that cells with anodes made of undoped $Li_4Ti_5O_{12}$ and Ba- and Sr-doped $Li_4Ti_5O_{12}$ have discharge capacities of 97, 130, and 112 mAh/g, respectively, at the first cycle. Moreover, the Ba- and Sr-doped spinel $Li_4Ti_5O_{12}$ demonstrated good properties in the mid-voltage range at 1.55 V, showing stable cyclic voltammogram properties which surpassed those of the same material without Ba or Sr at 1 C after 100 cycles.

Structural and Electrochemical Properties of Doped LiFe0.48Mn0.48Mg0.04PO4 as Cathode Material for Lithium ion Batteries

  • Jang, Donghyuk;Palanisamy, Kowsalya;Kim, Yunok;Yoon, Won-Sub
    • Journal of Electrochemical Science and Technology
    • /
    • 제4권3호
    • /
    • pp.102-107
    • /
    • 2013
  • The electrochemical properties of Mg-doped $LiFe_{0.48}Mn_{0.48}Mg_{0.04}PO_4$ and pure $LiFe_{0.5}Mn_{0.5}PO_4$ olivine cathodes are examined and the lattice parameters are refined by Rietveld analysis. The calculated atomic parameters from the refinement show that $Mg^{2+}$ doping has a significant effect in the olivine $LiFeMnPO_4$ structure. The unit cell volume is 297.053(2) ${\AA}^3$ for pure $LiFe_{0.5}Mn_{0.5}PO_4$ and is decreased to 296.177(1) ${\AA}^3$ for Mg-doped $LiFe_{0.48}Mn_{0.48}Mg_{0.04}PO_4$ sample. The doping of $Mg^{2+}$ cation with atomic radius smaller than $Mn^{2+}$ and $Fe^{2+}$ ion induces longer Li-O bond length in $LiO_6$ octahedra of the olivine structure. The larger interstitial sites in $LiO_6$ octahedra facilitate the lithium ion migration and also enhance the diffusion kinetics of olivine cathode material. The $LiFe_{0.48}Mn_{0.48}Mg_{0.04}PO_4$ sample with larger Li-O bond length delivers higher discharge capacities and also notably increases the rate capability of the electrode.

Electrochemical Properties of Li1.1V0.75W0.075Mo0.075O2/Graphite Composite Anodes for Lithium-ion Batteries

  • Kim, Hyung-Sun;Kim, Sang-Ok;Kim, Yong-Tae;Jung, Ji-Kwon;Na, Byung-Ki;Lee, Joong-Kee
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권1호
    • /
    • pp.65-68
    • /
    • 2012
  • Novel type $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ powders were prepared by a solid-state reaction of $Li_2CO_3$, $V_2O_3$, $WO_2$ and $MoO_2$ precursors in a nitrogen atmosphere containing 10 mol % hydrogen gas, and assessed as anode materials in lithium-ion batteries. The specific charge and discharge capacities of the $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ anodes were higher than those of the bare $Li_{1.1}V_{0.9}O_2$ anode. The cyclic efficiency of these anodes was approximately 73.3% at the first cycle, regardless of the presence of W and Mo doping. The composite anode, which was composed of $Li_{1.1}V_{0.75}W_{0.075}Mo_{0.075}O_2$ (20 wt %) and natural graphite (80 wt %), demonstrated reasonable specific capacity, high cyclic efficiency, and good cycling performance, even at high rates without capacity fading.

다목적 유전자 알고리즘을 이용한 우수유출 저류지 최적화 방안 (Optimization of Detention Facilities by Using Multi-Objective Genetic Algorithms)

  • 정재학;한건연;김극수
    • 한국수자원학회논문집
    • /
    • 제41권12호
    • /
    • pp.1211-1218
    • /
    • 2008
  • 본 연구의 목적은 다목적 유전자 알고리즘을 이용하여 우수유출 저류지를 소유역에 분담하여 설치 계획하는데있다. 이를 위해 우수유출 저류지의 위치 및 규모를 최적화하기 위한 모형을 개발하였다. 이 모형은 크게 2가지로 나뉘어 지는데, 유역유출모형과 최적해를 구하기 위하여 도입한 다목적 유전자 알고리즘(MOGAs)이다. 이러한 최적화 모형을 모의하기 위하여 목적함수는 첨두유출량과 저류지 저류용량의 함수로 설정하고, 제한조건은 기본적으로 구조적 제한과 저류용량 및 운영목적에 따라 설정하였다. 본 연구를 위해 만들어진 최적화 모형은 안양시 관양유역에 실제 적용해 보았으며, 그 결과 주어진 제약조건내에서 상류지역에 저류지가 설치되는 경우가 최적값으로 나타난 것을 통해 적절하게 잘 모의된 것으로 보인다. 그밖에 On-line 및 Off-line 저류지가 동시에 건설되는 경우에도 함께 최적화 모의가 가능한지도 살펴보았다. 본 연구를 통해 제시한 방법론은 향후 도시유역내의 홍수피해 저감계획시 활용될 수 있을 것이다.

Analysis of Urban Flood Damage Using SWMM5 and FLUMEN Model of Sadang Area in Korea

  • Li, Heng;Kim, Yeonsu;Lee, Seungsoo;Song, Miyeon;Jung, Kwansue
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2015년도 학술발표회
    • /
    • pp.396-396
    • /
    • 2015
  • Frequent urban floods affect the human safety and economic properties due to a lack of the capacity of drainage system and the increased frequency of torrential rainfall. The drainage system has played an important role in flooding control, so it is necessary to establish the effective countermeasures considering the connection between drainage system and surface flow. To consider the connection, we selected SWMM5 model for analyzing transportation capacity of drainage system and FLUMEN model for calculating inundation depth and time variation of inundation area. First, Thiessen method is used to delineate the sub-catchments effectively base on drainage network data in SWMM5. Then, the output data of SWMM5, hydrograph of each manhole, were used to simulate FLUMEN to obtain inundation depth and time variation of inundation area. The proposed method is applied to Sadang area for the event occurred in $27^{th}$ of July, 2011. A total of 11 manholes, we could check the overflow from the manholes during that event as a result of the SWMM5 simulation. After that, FLUMEN was utilized to simulate overland flow using the overflow discharge to calculate inundation depth and area on ground surface. The simulated results showed reasonable agreements with observed data. Through the simulations, we confirmed that the main reason of the inundation was the insufficient transportation capacities of drainage system. Therefore cooperation of both models can be used for not only estimating inundation damages in urban areas but also for providing the theoretical supports of the urban network reconstruction. As a future works, it is recommended to decide optimized pipe diameters for efficient urban inundation simulations.

  • PDF